sb4sd - ePumps
Model SB4SD
HYDROMATIC
Model S3SD
®
MODELS S3SD/S4SD & SB3SD/SB4SD SUBMERSIBLE SEWAGE DUAL SEAL PUMPS
WWW.HYDROMATIC.COM
SUBMERSIBLE SEWAGE DUAL SEAL PUMPS
HYDROMATIC MODELS S3SD/S4SD & SB3SD/SB4SD ®
Submersible Sewage Dual Seal Pumps Hydromatic introduces a competitively priced line of quality 3" and 4" discharge solids handling sewage pumps. The S3SD/S4SD and SB3SD/ SB4SD Series of 1 through 7-1/2 HP pumps feature horizontal or vertical discharge options for quick and easy installations. The quality double ball bearing, dual mechanical seal pumps incorporate a stainless steel shaft and internal heat sensor protection, coupled with strong performance capabilities up to 55' head and flows up to 700 gpm. Hydromatic’s dual seal pumps are suited to wet-well installation in a wide variety of municipal, industrial and building trades applications. The Hydromatic S3SD/S4SD and SB3SD/SB4SD sewage pumps are designed to transfer raw sewage with solids as large as 3" through pipes up to 4" in diameter. Sewage pumps are necessary to move sewage from a building to the sewer system, and in many cases, from the sewer system to a treatment plant. In the case of larger commercial installations, collection systems are designed to accumulate and transfer the wastewater efficiently. Examples of this are motels, apartment buildings, and industrial plants that tie in with sewer mains or on-site treatment facilities. For commercial or high volume applications, the usual procedure is to incorporate at least two pumps as a duplex system in conjunction with control panel, a guide system and quick disconnect discharge system. Hydromatic S3SD/ S4SD pumps provide maximum value that can’t be beat!
2
Model S3SD
SUBMERSIBLE SEWAGE DUAL SEAL PUMPS
Pump Features
The Hydromatic® S3SD/S4SD can be used with the Hydromatic pultruded I-beam rail system for easy installations. The corrosion resistant rail system permits the pump(s) to be lowered into position without entering the wet well. An exclusive self-sealing flange eliminates the need to bolt pump to the piping system. When the pump is activated, a neoprene diaphragm forms an effective seal between the discharge flange and the base elbow flange. A Hydromatic control panel will ensure proper start components and equal pump alternation. • Quality double ball bearing, dual mechanical seal. • Oil-filled motor for cooler operation, longer life, and less maintenance. The dielectric oil effectively dissipates heat and lubricates upper and lower ball bearings. • The start and run capacitors are located in the control panel for single phase motors. Contact your Hydromatic distributor for proper Hydromatic control panel sizing. • Standard construction is cast iron.
• Field serviceable; pumps have 300 series stainless steel fasteners for easy teardown. • Semiopen, two-vane sewage type impellers have pump-out vanes on back shrouds to prevent stringy materials from building up around shaft and seal. • Manufactured with carbon and ceramic faced mechanical shaft seal for long leakproof life. • All units given complete hydraulic test run before shipping.
• 400 series stainless steel shafts.
Model SB4SD
WWW.HYDROMATIC.COM
3
SUBMERSIBLE SEWAGE DUAL SEAL PUMPS
Pump Features A.
Oil-Filled Motor
The fully enclosed oil-filled motor efficiently dissipates heat and locks out moisture so you receive reliable pumping service.
D
Stainless Steel Shaft
B.
E
Eliminates corrosion and fatigue to give longer pump life. The minimum shaft overhang decreases deflection and increases seal life.
Mechanical Dual Seal
C.
Constructed with a ceramic stationary face and a carbon rotating face for long service life.
A D.
B
Sealed by both the cord grip and additionally by the epoxy barrier.
Ball Bearings
E.
E C
PVC Jacketed Power Cord
The heavy duty ball bearings, upper (radial and lower (thrust), are submerged in oil to provide permanent lubrication and ensure long service life.
G
C
F.
Impeller
The impeller is a two-vane semiopen design for efficient operation without clogging. The impeller has pump-out vanes to prevent material buildup around shaft and seal.
F
Sensor Probe
G.
Model S3SD
4
A seal-failure sensor probe (for connection to a seal failure alarm) is standard on three-phase units and available as a option on single phase models.
SUBMERSIBLE SEWAGE DUAL SEAL PUMPS
Pump Features A.
Oil-Filled Motor
The fully enclosed oil-filled motor efficiently dissipates heat and locks out moisture so you receive reliable pumping service.
D
Stainless Steel Shaft
B.
E
B
Eliminates corrosion and fatigue to give longer pump life. The minimum shaft overhang decreases deflection and increases seal life.
Mechanical Dual Seal
C.
A
Constructed with a ceramic stationary face and a carbon rotating face for long service life.
D.
E G
PVC Jacketed Power Cord
Sealed by both the cord grip and additionally by the epoxy barrier.
Ball Bearings
E.
C
The heavy duty ball bearings, upper (radial and lower (thrust), are submerged in oil to provide permanent lubrication and ensure long service life.
C F.
Impeller
The impeller is a two-vane semiopen design for efficient operation without clogging. The impeller has pump-out vanes to prevent material buildup around shaft and seal.
F
Sensor Probe
G.
Model S4SD
WWW.HYDROMATIC.COM
A seal-failure sensor probe (for connection to a seal failure alarm) is standard on three-phase units and available as a option on single phase models.
5
SUBMERSIBLE SEWAGE DUAL SEAL PUMPS
Engineering & Dimensional Details Pumps Characteristics Pump/Motor Unit
Submersible-Sewage Ejector
Phase
1Ø
3Ø
Voltage
208/230
208/230/460/575
Horsepower
1, 2, 3 & 5
2, 3, 5 & 7.5
Motor Type
Oil Cooled Induction 1750/1150
Temperature
140˚ F Ambient
Operation
Intermediate
Hertz
60 Hz
Thermal Overload
Bi-Metallic
Temperature
Maximum Water 140˚ F
NEMA Design
Type B (3 Ø)
Insulation
Class F
Discharge Size
3" Flanged/4" Flanged
NPT or Flanged
3"/4"
Unit Weight
180 lbs.
Power Cord
SOOW or W Water Resistant 600V, 90˚ C CSA Approved 35' Ft. Std.
15-1/2" (393.7)
4-3/8" (111.12)
Type L (1 Ø)
10-1/2" (266.7)
5-1/8" (130.18)
8-1/4" (209.55) 13-3/8" (339.73)
Model SB4SD
Materials of Construction
6
Model S3SD
24-5/8" (625.5)
1 Ø = Capacitor Start RPM
Dimensional Data
Description
Material of Construction
Motor Housing
Cast Iron ASTM-48, Class 30
Pump Casing
Cast Iron ASTM-48, Class 30
Coolant/Lubricant
Dielectric Oil
Shaft
Stainless Steel
Mechanical Shaft Seal
Seal Faces: Carbon/Ceramic Seal Body: Stainless Steel Spring: Stainless Steel Bellows: Buna-N
Impeller
Two-Vane Semiopen Cast Iron
Upper Bearing
Single Row Ball Bearing
Lower Bearing
Single Row Ball Bearing
Fasteners
Stainless Steel
27-1/4" (692.15)
7-1/16" (266.7) 22-1/4" (565.15)
11-3/8" (288.92)
5-13/16" (147.64)
6-1/2" (165.10)
11-1/8" (282.57)
All dimensions in inches (mm). Metric for international use. Component dimensions may vary ± 1/8 inch. Dimensional data not for construction purpose unless certified. Dimensions and weights are approximate. On/Off level adjustable. We reserve the right to make revisions to our product (s) and the product (s) specifications without notice.
SUBMERSIBLE SEWAGE DUAL SEAL PUMPS
Range Charts 1750 RPM – Model S3SD/SB3SD
1150 RPM – Model S3SD/SB3SD 24
6
70
10
50
0"
.
5.69"
45%
3" DIA . 5.8 8" D 40 IA. 5.6 9" D IA. 5.2 5 " 30 DIA . 4.7
5
40%
DIA
5"
20
50%
55%
4
.
2
45%
0
50% 4.75"
6
1 BHP
4
1
3 BHP
2 BHP
55% 5.25"
12
8
50%
DIA
14
10
3
55%
10
0
2 0
U.S. GPM -25
25 0
M 3 /HR
75 10
125 20
55%
16
30%
6.5
50%
5.88"
5
20%
6.1
HEAD (FEET)
HEAD (METERS)
15
40% 6.13"
18
60
30%
6.50"
20
HEAD (FEET)
20
22
80
HEAD (METERS)
25
7
175
30
40
225
275
50
60
325 70
20
40
60
80
100
120
140
80
160
180
200
220
240
260
280
U.S. GPM
375 0
90
1750 RPM – Model S4SD/SB4SD
5
10
15
20
25
30 35 M3/HR
40
45
50
55
1150 RPM – Model S4SD/SB4SD 34
40
10
32
80
30
9
8
40% 50%
7.13" DIA.
7
55%
6.75" DIA. 6.50" DIA. 6.25" DIA.
60%
6.06" DIA. 55%
30
4
3
20
26
7.38"
24
7.13"
30% 40% 50% 55% 6.75" 60% 6.50"
18 16
6.25"
14
6.06"
12
50%
5
7.50"
20
6
5
28
22
60% HEAD (FEET)
HEAD (FEET)
HEAD (METERS)
50
40
10
20% 30%
7.38" DIA.
60
20
7.5" DIA.
HEAD (METERS)
30
70
10
BHP 2
8
7.5 BHP
10
0
5 BHP
3 BHP
0
2
1
6 4
BHP 1
2 0
U.S. GPM
0
100
M3 /HR
0
25
WWW.HYDROMATIC.COM
200 50
300 75
400
500 100
600 125
50
100
150
200
700 150
175
0
10
20
30
40
250 U.S. GPM 50 60 M3/HR
300 70
350 80
400 90
450 100
7
Order A Complete System The Complete System A complete system from Hydromatic® would include a dual seal pump, Hydromatic control panel, level controls, and rail system. For more information, please contact your local distributor or the Hydromatic sales office in Ashland, Ohio at 419-289-3042. Control Panel S4SD Sewage Pump
3900 Level Control Switch Metal-to-Metal (M-T-M) Rail System Shown
740 EAST 9TH STREET, 269 TRILLIUM DRIVE, KITCHENER, ASHLAND, OHIO 44805 ONTARIO, CANADA N2G 4W5 WWW.HYDROMATIC.COM WWW.HYDROMATIC.COM Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. E-02-6850 1/11/13 © 2013 Pentair Ltd. All Rights Reserved.
HYDROMATIC
Model S3SD
®
MODELS S3SD/S4SD & SB3SD/SB4SD SUBMERSIBLE SEWAGE DUAL SEAL PUMPS
WWW.HYDROMATIC.COM
SUBMERSIBLE SEWAGE DUAL SEAL PUMPS
HYDROMATIC MODELS S3SD/S4SD & SB3SD/SB4SD ®
Submersible Sewage Dual Seal Pumps Hydromatic introduces a competitively priced line of quality 3" and 4" discharge solids handling sewage pumps. The S3SD/S4SD and SB3SD/ SB4SD Series of 1 through 7-1/2 HP pumps feature horizontal or vertical discharge options for quick and easy installations. The quality double ball bearing, dual mechanical seal pumps incorporate a stainless steel shaft and internal heat sensor protection, coupled with strong performance capabilities up to 55' head and flows up to 700 gpm. Hydromatic’s dual seal pumps are suited to wet-well installation in a wide variety of municipal, industrial and building trades applications. The Hydromatic S3SD/S4SD and SB3SD/SB4SD sewage pumps are designed to transfer raw sewage with solids as large as 3" through pipes up to 4" in diameter. Sewage pumps are necessary to move sewage from a building to the sewer system, and in many cases, from the sewer system to a treatment plant. In the case of larger commercial installations, collection systems are designed to accumulate and transfer the wastewater efficiently. Examples of this are motels, apartment buildings, and industrial plants that tie in with sewer mains or on-site treatment facilities. For commercial or high volume applications, the usual procedure is to incorporate at least two pumps as a duplex system in conjunction with control panel, a guide system and quick disconnect discharge system. Hydromatic S3SD/ S4SD pumps provide maximum value that can’t be beat!
2
Model S3SD
SUBMERSIBLE SEWAGE DUAL SEAL PUMPS
Pump Features
The Hydromatic® S3SD/S4SD can be used with the Hydromatic pultruded I-beam rail system for easy installations. The corrosion resistant rail system permits the pump(s) to be lowered into position without entering the wet well. An exclusive self-sealing flange eliminates the need to bolt pump to the piping system. When the pump is activated, a neoprene diaphragm forms an effective seal between the discharge flange and the base elbow flange. A Hydromatic control panel will ensure proper start components and equal pump alternation. • Quality double ball bearing, dual mechanical seal. • Oil-filled motor for cooler operation, longer life, and less maintenance. The dielectric oil effectively dissipates heat and lubricates upper and lower ball bearings. • The start and run capacitors are located in the control panel for single phase motors. Contact your Hydromatic distributor for proper Hydromatic control panel sizing. • Standard construction is cast iron.
• Field serviceable; pumps have 300 series stainless steel fasteners for easy teardown. • Semiopen, two-vane sewage type impellers have pump-out vanes on back shrouds to prevent stringy materials from building up around shaft and seal. • Manufactured with carbon and ceramic faced mechanical shaft seal for long leakproof life. • All units given complete hydraulic test run before shipping.
• 400 series stainless steel shafts.
Model SB4SD
WWW.HYDROMATIC.COM
3
SUBMERSIBLE SEWAGE DUAL SEAL PUMPS
Pump Features A.
Oil-Filled Motor
The fully enclosed oil-filled motor efficiently dissipates heat and locks out moisture so you receive reliable pumping service.
D
Stainless Steel Shaft
B.
E
Eliminates corrosion and fatigue to give longer pump life. The minimum shaft overhang decreases deflection and increases seal life.
Mechanical Dual Seal
C.
Constructed with a ceramic stationary face and a carbon rotating face for long service life.
A D.
B
Sealed by both the cord grip and additionally by the epoxy barrier.
Ball Bearings
E.
E C
PVC Jacketed Power Cord
The heavy duty ball bearings, upper (radial and lower (thrust), are submerged in oil to provide permanent lubrication and ensure long service life.
G
C
F.
Impeller
The impeller is a two-vane semiopen design for efficient operation without clogging. The impeller has pump-out vanes to prevent material buildup around shaft and seal.
F
Sensor Probe
G.
Model S3SD
4
A seal-failure sensor probe (for connection to a seal failure alarm) is standard on three-phase units and available as a option on single phase models.
SUBMERSIBLE SEWAGE DUAL SEAL PUMPS
Pump Features A.
Oil-Filled Motor
The fully enclosed oil-filled motor efficiently dissipates heat and locks out moisture so you receive reliable pumping service.
D
Stainless Steel Shaft
B.
E
B
Eliminates corrosion and fatigue to give longer pump life. The minimum shaft overhang decreases deflection and increases seal life.
Mechanical Dual Seal
C.
A
Constructed with a ceramic stationary face and a carbon rotating face for long service life.
D.
E G
PVC Jacketed Power Cord
Sealed by both the cord grip and additionally by the epoxy barrier.
Ball Bearings
E.
C
The heavy duty ball bearings, upper (radial and lower (thrust), are submerged in oil to provide permanent lubrication and ensure long service life.
C F.
Impeller
The impeller is a two-vane semiopen design for efficient operation without clogging. The impeller has pump-out vanes to prevent material buildup around shaft and seal.
F
Sensor Probe
G.
Model S4SD
WWW.HYDROMATIC.COM
A seal-failure sensor probe (for connection to a seal failure alarm) is standard on three-phase units and available as a option on single phase models.
5
SUBMERSIBLE SEWAGE DUAL SEAL PUMPS
Engineering & Dimensional Details Pumps Characteristics Pump/Motor Unit
Submersible-Sewage Ejector
Phase
1Ø
3Ø
Voltage
208/230
208/230/460/575
Horsepower
1, 2, 3 & 5
2, 3, 5 & 7.5
Motor Type
Oil Cooled Induction 1750/1150
Temperature
140˚ F Ambient
Operation
Intermediate
Hertz
60 Hz
Thermal Overload
Bi-Metallic
Temperature
Maximum Water 140˚ F
NEMA Design
Type B (3 Ø)
Insulation
Class F
Discharge Size
3" Flanged/4" Flanged
NPT or Flanged
3"/4"
Unit Weight
180 lbs.
Power Cord
SOOW or W Water Resistant 600V, 90˚ C CSA Approved 35' Ft. Std.
15-1/2" (393.7)
4-3/8" (111.12)
Type L (1 Ø)
10-1/2" (266.7)
5-1/8" (130.18)
8-1/4" (209.55) 13-3/8" (339.73)
Model SB4SD
Materials of Construction
6
Model S3SD
24-5/8" (625.5)
1 Ø = Capacitor Start RPM
Dimensional Data
Description
Material of Construction
Motor Housing
Cast Iron ASTM-48, Class 30
Pump Casing
Cast Iron ASTM-48, Class 30
Coolant/Lubricant
Dielectric Oil
Shaft
Stainless Steel
Mechanical Shaft Seal
Seal Faces: Carbon/Ceramic Seal Body: Stainless Steel Spring: Stainless Steel Bellows: Buna-N
Impeller
Two-Vane Semiopen Cast Iron
Upper Bearing
Single Row Ball Bearing
Lower Bearing
Single Row Ball Bearing
Fasteners
Stainless Steel
27-1/4" (692.15)
7-1/16" (266.7) 22-1/4" (565.15)
11-3/8" (288.92)
5-13/16" (147.64)
6-1/2" (165.10)
11-1/8" (282.57)
All dimensions in inches (mm). Metric for international use. Component dimensions may vary ± 1/8 inch. Dimensional data not for construction purpose unless certified. Dimensions and weights are approximate. On/Off level adjustable. We reserve the right to make revisions to our product (s) and the product (s) specifications without notice.
SUBMERSIBLE SEWAGE DUAL SEAL PUMPS
Range Charts 1750 RPM – Model S3SD/SB3SD
1150 RPM – Model S3SD/SB3SD 24
6
70
10
50
0"
.
5.69"
45%
3" DIA . 5.8 8" D 40 IA. 5.6 9" D IA. 5.2 5 " 30 DIA . 4.7
5
40%
DIA
5"
20
50%
55%
4
.
2
45%
0
50% 4.75"
6
1 BHP
4
1
3 BHP
2 BHP
55% 5.25"
12
8
50%
DIA
14
10
3
55%
10
0
2 0
U.S. GPM -25
25 0
M 3 /HR
75 10
125 20
55%
16
30%
6.5
50%
5.88"
5
20%
6.1
HEAD (FEET)
HEAD (METERS)
15
40% 6.13"
18
60
30%
6.50"
20
HEAD (FEET)
20
22
80
HEAD (METERS)
25
7
175
30
40
225
275
50
60
325 70
20
40
60
80
100
120
140
80
160
180
200
220
240
260
280
U.S. GPM
375 0
90
1750 RPM – Model S4SD/SB4SD
5
10
15
20
25
30 35 M3/HR
40
45
50
55
1150 RPM – Model S4SD/SB4SD 34
40
10
32
80
30
9
8
40% 50%
7.13" DIA.
7
55%
6.75" DIA. 6.50" DIA. 6.25" DIA.
60%
6.06" DIA. 55%
30
4
3
20
26
7.38"
24
7.13"
30% 40% 50% 55% 6.75" 60% 6.50"
18 16
6.25"
14
6.06"
12
50%
5
7.50"
20
6
5
28
22
60% HEAD (FEET)
HEAD (FEET)
HEAD (METERS)
50
40
10
20% 30%
7.38" DIA.
60
20
7.5" DIA.
HEAD (METERS)
30
70
10
BHP 2
8
7.5 BHP
10
0
5 BHP
3 BHP
0
2
1
6 4
BHP 1
2 0
U.S. GPM
0
100
M3 /HR
0
25
WWW.HYDROMATIC.COM
200 50
300 75
400
500 100
600 125
50
100
150
200
700 150
175
0
10
20
30
40
250 U.S. GPM 50 60 M3/HR
300 70
350 80
400 90
450 100
7
Order A Complete System The Complete System A complete system from Hydromatic® would include a dual seal pump, Hydromatic control panel, level controls, and rail system. For more information, please contact your local distributor or the Hydromatic sales office in Ashland, Ohio at 419-289-3042. Control Panel S4SD Sewage Pump
3900 Level Control Switch Metal-to-Metal (M-T-M) Rail System Shown
740 EAST 9TH STREET, 269 TRILLIUM DRIVE, KITCHENER, ASHLAND, OHIO 44805 ONTARIO, CANADA N2G 4W5 WWW.HYDROMATIC.COM WWW.HYDROMATIC.COM Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. E-02-6850 1/11/13 © 2013 Pentair Ltd. All Rights Reserved.
