sc16_double installation drg - Martin Engineering
SC16 DOUBLE SCRAPER 600 - 2400BW
INSTALLATION DRAWING
NOTE: IDLER ROLL TO BE INSTALLED WITH DOWNWARD PRESSURE 200mm AFTER SCRAPER IF SCRAPER POSITION FURTHER BACK THAN 250mm FROM POINT B. FOR BELT SPEEDS GREATER THAN 5m/s MARTIN RECOMMENDS A SOLID ROLL.
FIXING CENTERS (QTY OF BUFFERS)/2 x 150 (REF TABLE BELOW)
"L"
"L"
100 MAX. FROM TANGENT POINT
CL CONVEYOR
UP TO 1050 = 50 1200 UPWARDS = 60
TANGENT POINT ¹
6 B
UP TO 1050 = 200 1200 UPWARDS = 210
A
5
100
460
"Ø D"
"Ø C"
3
OPENING UP TO 1050 = 300 1200 UPWARDS = 350
SUPPORT PIPE - STANDARD OVERALL DIMENSION ALWAYS WIDER THAN BELT WIDTH CUT TO REQUIRED DIMENSION ON INSTALLATION
4
1 7 2 FOR TENSIONING, APPLY 3 FULL TURNS
OUTSIDE DIMENSION OF CHUTE
150
150 OPENING 400
260 200
14 30
FRONT VIEW
SIDE VIEW
60
60
80 L
ØC
ØD
600 - 1200
500
60.5
48
1350 - UPWARDS
600
76
60
¹ TANGENT POINT REFERS TO THE POINT WHERE THE BELT LEAVES THE PULLEY
NOTE: XXXX INDICATES BELT WIDTH ie. 0750 FOR 750mm BELT WIDTH & 1800 FOR 1800mm BELT WIDTH "E"
BELT WIDTH
* INDICATES REPLACEMENT PARTS
QTY
BELT WIDTH
ITEM No.5 RUBBER BUFFER
ITEM No.5 BLADE
ITEM No.
QTY
COMPONENT DESCRIPTION
PART No.
REFERENCE
60 DIA PIPE 600-1050 BW
SC60/STD/PIPE/0XXX
* *
PROPERTY OF MARTIN
1
2
SUPPORT PIPE
76 DIA PIPE 1050-2400 BW
SC76/STD/PIPE/0XXX
2
1 PAIR
DOUBLE SCRAPERS
450 C BRKT. 600-2400 BW
BRKT/000/CHAN/T0450
4
SUPPORT CLAMP
60 DIA CLAMP 600-1050 BW
CLMP/STD/0000/00060
*
60 DIA PIPE CLAMP
76 DIA CLAMP 1050-2400 BW
CLMP/STD/0000/00076
*
76 DIA PIPE CLAMP
48 DIA 600-1050 BW
CRDL/STD/PIPE/0XXXX
60 DIA 1050-2400 BW
CRDL/STD/PIPE/0XXXX
RUBBER BUFFER
SC16/000/0000/0150B
XXXX SUPPORT PIPE
600
8
8
750
10
10
900
12
12
1050
14
14
1200
16
16
1350
18
18
1500
20
20
1650
22
22
1800
24
24
A.R.B. TUNGSTEN SANDWICH
SC16/ARB/SND0/00150
*
SC16 ARB SANDWICH
2000
26
26
A.R.B. TUNGSTEN
SC16/ARB/0000/00150
*
SC16 ARB
2100
28
28
SANDWICH
SC16/SND/SND0/00150
2200
30
30
H.A.R. TUNGSTEN
SC16/HAR/0000/00150
2400
32
32
ADJUSTING BRACKET
BRKT/000/0000/00ADJ
3 4 5
6
7
4 2 2
CRADLE
AS REQ'D
AS REQ'D
4
BLADE
© COPYRIGHT MARTIN, A DIVISION OF MARTIN BULK HANDLING SOLUTIONS(PTY) LTD., T/A MARTIN ENGINEERING. ALL RIGHTS RESERVED COVERED BY U.S. AND FOREIGN PATENTS PENDING AND ISSUED. ® AND ™ INDICATE TRADEMARKS OF MARTIN ENGINEERING.
*
*
*
THE INFORMATION CONTAINED WITHIN THIS DRAWING FILE INVOLVES CONFIDENTIAL PROPRIETARY DESIGN RIGHTS OF MARTIN. IT IS SUBMITTED FOR A SPECIFIED PURPOSE AND THE RECIPIENT, BY ACCEPTING THIS DOCUMENT AGREES 1. THAT THIS DOCUMENT WILL NOT BE COPIED OR REPRODUCED IN WHOLE OR IN PART, EXCEPT TO MEET THE PURPOSE FOR WHICH IT WAS DELIVERED, AND 2. THAT ANY SPECIAL FEATURES PARTICULAR TO THIS DESIGN WILL NOT BE INCORPORATED IN OTHER PROJECTS AND/OR DESIGNS. 3. THAT THIS IS NOT FOR PUBLIC DISTRIBUTION
CHANNEL T BRACKET
450 CHANNEL "T" BRACKET
"E"
XXXX SUPPORT PIPE CRADLE
CHANNEL T BRACKET 350mm
360mm
CHANNEL T BRACKET 450mm
460mm
SC16 BUFFER
CHANNEL T BRACKET 600mm
600mm
APPROVAL SIGN:
F.DE KLERK
SIGN:
S.ENSLIN
DATE:
06/05/2013
DATE:
06/05/2013
MARKETING DEPT
PRODUCTION DEPT
SC16 SANDWICH
0
INITIAL RELEASE
06/05/2013
R.BEER
SIGN:
M.LEZAR
SIGN:
*
SC16 HAR
REV.
DESCRIPTION
DATE
APPROVED
DATE:
06/05/2013
DATE:
*
ADJUSTING BRKT
REVISIONS
SALES DEPT
WITBANK SOUTH AFRICA + 27 13 656 5135 www.martin-eng.co.za TITLE
MARTIN ENGINEERING WITBANK SOUTH AFRICA SC16 600 - 2400BW DOUBLE INSTALLATION DRAWING
DRAWING NUMBER OTHER
SHEET 1 OF 1
SC16 600 - 2400 BW DOUBLE
DRAWN BY: DJB DATE: 01/11/2012 CHK.: F.KOTZE DATE: 03/05/2013 ENG.: R.BEER DATE: 03/05/2013 PM.: C.COETZER DATE: 03/05/2013 REV: SCALE: NTS
0
INSTALLATION DRAWING
NOTE: IDLER ROLL TO BE INSTALLED WITH DOWNWARD PRESSURE 200mm AFTER SCRAPER IF SCRAPER POSITION FURTHER BACK THAN 250mm FROM POINT B. FOR BELT SPEEDS GREATER THAN 5m/s MARTIN RECOMMENDS A SOLID ROLL.
FIXING CENTERS (QTY OF BUFFERS)/2 x 150 (REF TABLE BELOW)
"L"
"L"
100 MAX. FROM TANGENT POINT
CL CONVEYOR
UP TO 1050 = 50 1200 UPWARDS = 60
TANGENT POINT ¹
6 B
UP TO 1050 = 200 1200 UPWARDS = 210
A
5
100
460
"Ø D"
"Ø C"
3
OPENING UP TO 1050 = 300 1200 UPWARDS = 350
SUPPORT PIPE - STANDARD OVERALL DIMENSION ALWAYS WIDER THAN BELT WIDTH CUT TO REQUIRED DIMENSION ON INSTALLATION
4
1 7 2 FOR TENSIONING, APPLY 3 FULL TURNS
OUTSIDE DIMENSION OF CHUTE
150
150 OPENING 400
260 200
14 30
FRONT VIEW
SIDE VIEW
60
60
80 L
ØC
ØD
600 - 1200
500
60.5
48
1350 - UPWARDS
600
76
60
¹ TANGENT POINT REFERS TO THE POINT WHERE THE BELT LEAVES THE PULLEY
NOTE: XXXX INDICATES BELT WIDTH ie. 0750 FOR 750mm BELT WIDTH & 1800 FOR 1800mm BELT WIDTH "E"
BELT WIDTH
* INDICATES REPLACEMENT PARTS
QTY
BELT WIDTH
ITEM No.5 RUBBER BUFFER
ITEM No.5 BLADE
ITEM No.
QTY
COMPONENT DESCRIPTION
PART No.
REFERENCE
60 DIA PIPE 600-1050 BW
SC60/STD/PIPE/0XXX
* *
PROPERTY OF MARTIN
1
2
SUPPORT PIPE
76 DIA PIPE 1050-2400 BW
SC76/STD/PIPE/0XXX
2
1 PAIR
DOUBLE SCRAPERS
450 C BRKT. 600-2400 BW
BRKT/000/CHAN/T0450
4
SUPPORT CLAMP
60 DIA CLAMP 600-1050 BW
CLMP/STD/0000/00060
*
60 DIA PIPE CLAMP
76 DIA CLAMP 1050-2400 BW
CLMP/STD/0000/00076
*
76 DIA PIPE CLAMP
48 DIA 600-1050 BW
CRDL/STD/PIPE/0XXXX
60 DIA 1050-2400 BW
CRDL/STD/PIPE/0XXXX
RUBBER BUFFER
SC16/000/0000/0150B
XXXX SUPPORT PIPE
600
8
8
750
10
10
900
12
12
1050
14
14
1200
16
16
1350
18
18
1500
20
20
1650
22
22
1800
24
24
A.R.B. TUNGSTEN SANDWICH
SC16/ARB/SND0/00150
*
SC16 ARB SANDWICH
2000
26
26
A.R.B. TUNGSTEN
SC16/ARB/0000/00150
*
SC16 ARB
2100
28
28
SANDWICH
SC16/SND/SND0/00150
2200
30
30
H.A.R. TUNGSTEN
SC16/HAR/0000/00150
2400
32
32
ADJUSTING BRACKET
BRKT/000/0000/00ADJ
3 4 5
6
7
4 2 2
CRADLE
AS REQ'D
AS REQ'D
4
BLADE
© COPYRIGHT MARTIN, A DIVISION OF MARTIN BULK HANDLING SOLUTIONS(PTY) LTD., T/A MARTIN ENGINEERING. ALL RIGHTS RESERVED COVERED BY U.S. AND FOREIGN PATENTS PENDING AND ISSUED. ® AND ™ INDICATE TRADEMARKS OF MARTIN ENGINEERING.
*
*
*
THE INFORMATION CONTAINED WITHIN THIS DRAWING FILE INVOLVES CONFIDENTIAL PROPRIETARY DESIGN RIGHTS OF MARTIN. IT IS SUBMITTED FOR A SPECIFIED PURPOSE AND THE RECIPIENT, BY ACCEPTING THIS DOCUMENT AGREES 1. THAT THIS DOCUMENT WILL NOT BE COPIED OR REPRODUCED IN WHOLE OR IN PART, EXCEPT TO MEET THE PURPOSE FOR WHICH IT WAS DELIVERED, AND 2. THAT ANY SPECIAL FEATURES PARTICULAR TO THIS DESIGN WILL NOT BE INCORPORATED IN OTHER PROJECTS AND/OR DESIGNS. 3. THAT THIS IS NOT FOR PUBLIC DISTRIBUTION
CHANNEL T BRACKET
450 CHANNEL "T" BRACKET
"E"
XXXX SUPPORT PIPE CRADLE
CHANNEL T BRACKET 350mm
360mm
CHANNEL T BRACKET 450mm
460mm
SC16 BUFFER
CHANNEL T BRACKET 600mm
600mm
APPROVAL SIGN:
F.DE KLERK
SIGN:
S.ENSLIN
DATE:
06/05/2013
DATE:
06/05/2013
MARKETING DEPT
PRODUCTION DEPT
SC16 SANDWICH
0
INITIAL RELEASE
06/05/2013
R.BEER
SIGN:
M.LEZAR
SIGN:
*
SC16 HAR
REV.
DESCRIPTION
DATE
APPROVED
DATE:
06/05/2013
DATE:
*
ADJUSTING BRKT
REVISIONS
SALES DEPT
WITBANK SOUTH AFRICA + 27 13 656 5135 www.martin-eng.co.za TITLE
MARTIN ENGINEERING WITBANK SOUTH AFRICA SC16 600 - 2400BW DOUBLE INSTALLATION DRAWING
DRAWING NUMBER OTHER
SHEET 1 OF 1
SC16 600 - 2400 BW DOUBLE
DRAWN BY: DJB DATE: 01/11/2012 CHK.: F.KOTZE DATE: 03/05/2013 ENG.: R.BEER DATE: 03/05/2013 PM.: C.COETZER DATE: 03/05/2013 REV: SCALE: NTS
0
