ScarabTM EL720
Reset Form
Scarab EL720 TM
120 Volt Die-Cast Aluminum, PAR20 Halogen revision 8/15/11 • el720.pdf
Type: Job: Fixture Catalog number:
Approvals:
Fixture Options: Ordered Separately from Fixture See pages 2-3
Mounting Options: Fixture and Finish
Date: Page: 1 of 6
Ordered Separately from Fixture See pages 4-6
Specifications Housing: Die-cast aluminum body, lamp housing and socket enclosure. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to powder coating for added corrosion resistance. Lens Frame: Integral die-cast aluminum lens ring and glare shield. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Gasketing: Silicone gaskets used throughout. Socket: Nickel plated brass/porcelain socket. 4KV pulse rated. Wiring: No. 18AWM rated 105°C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations.
ORDERING INFORMATION Fixture Finish EL720BL Black EL720DB Dark Bronze EL720GR Verde Green Wattage / Lamp 35W - 50W PAR20 Halogen
7K"
(190.5 mm)
4K"
(114.3 mm)
6D"r. 3D"
(92.0 mm)
2B"
(54.0 mm)
K" NPT
U.S. PATENT D424,731 KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Scarab EL720 TM
120 Volt Die-Cast Aluminum, PAR20 Halogen revision 8/15/11 • el720.pdf
Type: Job:
Page: 2 of 6
Fixture Options Ordered Separately from Fixture Lens Accessories Cat. No. (See right) No Option
HL72 - Hex Cell Louver: Constructed of hex cell aluminum louvers providing 45° cutoff, mounted in a circular frame, finished in baked high-heat flat black. Can be used in combination with colored lenses. Inserts behind lens into lens gasket. Cannot be used in combination with SL spread or PL prismatic lenses. Cat. No. HL72 Hex Cell Louver PL72 - Prismatic Lens: Softens lamp distribution and flattens beam spread. Best with flood lamps. Inserts behind lens into lens gasket. Cannot be used in combination with HL72 louver. Cat. No. PL72 Prismatic Lens SL72 - Spread Lens: Creates an oval beam pattern, more narrow in one beam axis. Best with spot lamps. Inserts behind lens into lens gasket. Cannot be used in combination with HL72 louver. Cat. No. SL72 Spread Lens
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Scarab EL720 TM
120 Volt Die-Cast Aluminum, PAR20 Halogen revision 8/15/11 • el720.pdf
Type: Job:
Page: 3 of 6
Fixture Options Ordered Separately from Fixture Aluminum Adjustable Glare Shield Cat. No. Finish AGS72BL Black AGS72DB Dark Bronze AGS72GR Verde Green No Option
Spun aluminum shield with 45° cut and drain hole. Includes die-cast low copper alloy (< 0.6%) aluminum lens ring. The shield is rotatable 360°. Replaces standard lens ring/hood on fixture.
Aluminum Full Glare Shield Cat. No. Finish FGS72BL Black FGS72DB Dark Bronze FGS72GR Verde Green No Option
Spun aluminum shield with drain hole. Includes die-cast low copper aluminum lens ring. Replaces standard lens ring/hood on fixture.
Debris Screen Cat. No. Finish DS72 Black No Option
Stainless steel wire screen welded to flange, and held in place with spring clips. Screen inserts inside full glare shield only. All debris screens are black iridite colored.
4M" (109.5 mm)
3N" DIA. (90.5 mm)
5D" (142.9 mm)
3G" DIA. (87.3 mm)
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
31° cutoff
Scarab EL720 TM
120 Volt Die-Cast Aluminum, PAR20 Halogen revision 8/15/11 • el720.pdf
Type: Job:
Page: 4 of 6
Mounting Options Ordered Separately from Fixture Landscape Light Post by Engineered Products Co. Cat. No. EP17 No Option
PVC fixture molded in black with K" NPT mount is corrosion free and UV resistant. Replaces EMT, conduit connectors and weatherproof boxes. 100% shatter resistant against denting and cracking. Angled bottom to eliminate cable congestion. 17K" post length x = required depth of conduit NOTE: EP17 should be used with a per UL local listedcodes fixture and grounding means (i.e., third wire) suitable for use in wet locations. “x” = required depth of conduit per local code.
3J" DIA. K" NPT Fixture Mount 2J" (57.2 mm)
x
(82.6 mm)
1" (25.4 mm)
17K" 17K" 17
(444.5 mm)
3K" 3K"
(88.9 mm)
5" 5"
(127.0 mm)
Rigid Conduit (by others)
Architectural Junction Box Cat. No. Finish JB1/BL Black JB1/DB Dark Bronze JB1/GR Verde Green No Option
Die-cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. Two K" NPSM in bottom, 17 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures. Application Notes • Elevates Accent Lights above ground cover to prevent foliage from blocking the light. • Elevates Path Lights above ground cover to achieve a greater light throw. CAUTION: junction box must be installed high enough to avoid contact with soil or standing water.
Portable Spear Mount Cat. No. J-25N No Option
Cast iron with K" NPSM fixture mount. Hot dip galvanized finish. 5.5 cu in. splice compartment. (SJTW-A) 3 wire cord and plug. 9' cord length
3" DIA. (76 mm)
K" NPSM Fixture Mount
4L"
(121 mm)
3K" DIA. (88.9 mm)
K" NPSM Fixture Mount
2J" (57.2 mm)
6E" 6E" (174.6 mm)
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Scarab EL720 TM
120 Volt Die-Cast Aluminum, PAR20 Halogen revision 8/15/11 • el720.pdf
Type: Job:
Page: 5 of 6
Mounting Options Ordered Separately from Fixture Brass In-grade Architectural Junction Box Cat. No. JBR-2 JBR-3 JBR-21 JBR-24 No Option
Brass In-grade Staked Junction Box Cat. No. JBR30 No Option
Brass In-grade Staked Junction Box with Cord Cat. No. JBR32 No Option
Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. JBR-2 (2) K" NPT in bottom JBR-3 (2) L" NPT in bottom JBR-21 (2) K" NPT in sides, (2) K" NPT in bottom JBR-24 (4) K" NPT in sides, (2) K" NPT in bottom All side taps provided with plugs. NOTE: May also be used to hard mount low voltage fixtures. 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes • Creates a flush-mounted appearance. • May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from junction box.
3L" DIA. K" NPSM Fixture Mount
3"
JBR30 BRASS IN-GRADE STAKED JUNCTION BOX Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (2) K" NPT in bottom with (2) 19" long brass stakes NOTE: May also be used to hard mount low voltage fixtures. JBR32 BRASS IN-GRADE STAKED JUNCTION BOX WITH CORD Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (SJTW-A) 3 wire cord and plug. (2) 19" long brass stakes with 9' cord 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes • Creates a flush-mounted appearance. • May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from junction box.
K"
3L" DIA.
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
K" NPSM Fixture Mount 3K"
19C"
18D"
1"
Scarab EL720 TM
120 Volt Die-Cast Aluminum, PAR20 Halogen revision 8/15/11 • el720.pdf
Type: Job:
Page: 6 of 6
Mounting Options Ordered Separately from Fixture Stanchion Mount Cat. No. Finish SM18/BL Black SM18/DB Dark Bronze SM18/GR Verde Green No Option
3" O.D. by .188" wall cast aluminum with K" NPSM fixture mount and hand hole with flush cover. Internal set screw fixture lock accessible through hand hole. Internal ground lug supplied with installed lead. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures.
K" NPSM Fixture Mount 6" Min. (152.4 mm) 12" Max. (304.8 mm)
Optional Concrete (by others)
Surface Mount Cat. No. Finish J-27N/BL Black J-27N/DB Dark Bronze J-27N/GR Verde Green No Option
Cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. 5 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures.
Architectural Wall Mount Cat. No. Finish JW/BL Black JW/DB Dark Bronze JW/GR Verde Green No Option
Die-cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. Canopy attaches to stainless steel wall plate for mounting to any standard electrical outlet box. Super TGIC powder coat paint over titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures.
2F" (55.6 mm)
18" (457.2 mm)
Rigid Conduit (by others)
1L" (44.5 mm)
K" NPSM Fixture Mount
4K" (114.3 mm)
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
3" DIA. (76.2 mm)
J-Box in wall (by others)
5" DIA. (127.0 mm)
K" NPSM Fixture Mount
Scarab EL720 TM
120 Volt Die-Cast Aluminum, PAR20 Halogen revision 8/15/11 • el720.pdf
Type: Job: Fixture Catalog number:
Approvals:
Fixture Options: Ordered Separately from Fixture See pages 2-3
Mounting Options: Fixture and Finish
Date: Page: 1 of 6
Ordered Separately from Fixture See pages 4-6
Specifications Housing: Die-cast aluminum body, lamp housing and socket enclosure. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to powder coating for added corrosion resistance. Lens Frame: Integral die-cast aluminum lens ring and glare shield. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Gasketing: Silicone gaskets used throughout. Socket: Nickel plated brass/porcelain socket. 4KV pulse rated. Wiring: No. 18AWM rated 105°C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations.
ORDERING INFORMATION Fixture Finish EL720BL Black EL720DB Dark Bronze EL720GR Verde Green Wattage / Lamp 35W - 50W PAR20 Halogen
7K"
(190.5 mm)
4K"
(114.3 mm)
6D"r. 3D"
(92.0 mm)
2B"
(54.0 mm)
K" NPT
U.S. PATENT D424,731 KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Scarab EL720 TM
120 Volt Die-Cast Aluminum, PAR20 Halogen revision 8/15/11 • el720.pdf
Type: Job:
Page: 2 of 6
Fixture Options Ordered Separately from Fixture Lens Accessories Cat. No. (See right) No Option
HL72 - Hex Cell Louver: Constructed of hex cell aluminum louvers providing 45° cutoff, mounted in a circular frame, finished in baked high-heat flat black. Can be used in combination with colored lenses. Inserts behind lens into lens gasket. Cannot be used in combination with SL spread or PL prismatic lenses. Cat. No. HL72 Hex Cell Louver PL72 - Prismatic Lens: Softens lamp distribution and flattens beam spread. Best with flood lamps. Inserts behind lens into lens gasket. Cannot be used in combination with HL72 louver. Cat. No. PL72 Prismatic Lens SL72 - Spread Lens: Creates an oval beam pattern, more narrow in one beam axis. Best with spot lamps. Inserts behind lens into lens gasket. Cannot be used in combination with HL72 louver. Cat. No. SL72 Spread Lens
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Scarab EL720 TM
120 Volt Die-Cast Aluminum, PAR20 Halogen revision 8/15/11 • el720.pdf
Type: Job:
Page: 3 of 6
Fixture Options Ordered Separately from Fixture Aluminum Adjustable Glare Shield Cat. No. Finish AGS72BL Black AGS72DB Dark Bronze AGS72GR Verde Green No Option
Spun aluminum shield with 45° cut and drain hole. Includes die-cast low copper alloy (< 0.6%) aluminum lens ring. The shield is rotatable 360°. Replaces standard lens ring/hood on fixture.
Aluminum Full Glare Shield Cat. No. Finish FGS72BL Black FGS72DB Dark Bronze FGS72GR Verde Green No Option
Spun aluminum shield with drain hole. Includes die-cast low copper aluminum lens ring. Replaces standard lens ring/hood on fixture.
Debris Screen Cat. No. Finish DS72 Black No Option
Stainless steel wire screen welded to flange, and held in place with spring clips. Screen inserts inside full glare shield only. All debris screens are black iridite colored.
4M" (109.5 mm)
3N" DIA. (90.5 mm)
5D" (142.9 mm)
3G" DIA. (87.3 mm)
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
31° cutoff
Scarab EL720 TM
120 Volt Die-Cast Aluminum, PAR20 Halogen revision 8/15/11 • el720.pdf
Type: Job:
Page: 4 of 6
Mounting Options Ordered Separately from Fixture Landscape Light Post by Engineered Products Co. Cat. No. EP17 No Option
PVC fixture molded in black with K" NPT mount is corrosion free and UV resistant. Replaces EMT, conduit connectors and weatherproof boxes. 100% shatter resistant against denting and cracking. Angled bottom to eliminate cable congestion. 17K" post length x = required depth of conduit NOTE: EP17 should be used with a per UL local listedcodes fixture and grounding means (i.e., third wire) suitable for use in wet locations. “x” = required depth of conduit per local code.
3J" DIA. K" NPT Fixture Mount 2J" (57.2 mm)
x
(82.6 mm)
1" (25.4 mm)
17K" 17K" 17
(444.5 mm)
3K" 3K"
(88.9 mm)
5" 5"
(127.0 mm)
Rigid Conduit (by others)
Architectural Junction Box Cat. No. Finish JB1/BL Black JB1/DB Dark Bronze JB1/GR Verde Green No Option
Die-cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. Two K" NPSM in bottom, 17 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures. Application Notes • Elevates Accent Lights above ground cover to prevent foliage from blocking the light. • Elevates Path Lights above ground cover to achieve a greater light throw. CAUTION: junction box must be installed high enough to avoid contact with soil or standing water.
Portable Spear Mount Cat. No. J-25N No Option
Cast iron with K" NPSM fixture mount. Hot dip galvanized finish. 5.5 cu in. splice compartment. (SJTW-A) 3 wire cord and plug. 9' cord length
3" DIA. (76 mm)
K" NPSM Fixture Mount
4L"
(121 mm)
3K" DIA. (88.9 mm)
K" NPSM Fixture Mount
2J" (57.2 mm)
6E" 6E" (174.6 mm)
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Scarab EL720 TM
120 Volt Die-Cast Aluminum, PAR20 Halogen revision 8/15/11 • el720.pdf
Type: Job:
Page: 5 of 6
Mounting Options Ordered Separately from Fixture Brass In-grade Architectural Junction Box Cat. No. JBR-2 JBR-3 JBR-21 JBR-24 No Option
Brass In-grade Staked Junction Box Cat. No. JBR30 No Option
Brass In-grade Staked Junction Box with Cord Cat. No. JBR32 No Option
Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. JBR-2 (2) K" NPT in bottom JBR-3 (2) L" NPT in bottom JBR-21 (2) K" NPT in sides, (2) K" NPT in bottom JBR-24 (4) K" NPT in sides, (2) K" NPT in bottom All side taps provided with plugs. NOTE: May also be used to hard mount low voltage fixtures. 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes • Creates a flush-mounted appearance. • May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from junction box.
3L" DIA. K" NPSM Fixture Mount
3"
JBR30 BRASS IN-GRADE STAKED JUNCTION BOX Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (2) K" NPT in bottom with (2) 19" long brass stakes NOTE: May also be used to hard mount low voltage fixtures. JBR32 BRASS IN-GRADE STAKED JUNCTION BOX WITH CORD Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (SJTW-A) 3 wire cord and plug. (2) 19" long brass stakes with 9' cord 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes • Creates a flush-mounted appearance. • May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from junction box.
K"
3L" DIA.
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
K" NPSM Fixture Mount 3K"
19C"
18D"
1"
Scarab EL720 TM
120 Volt Die-Cast Aluminum, PAR20 Halogen revision 8/15/11 • el720.pdf
Type: Job:
Page: 6 of 6
Mounting Options Ordered Separately from Fixture Stanchion Mount Cat. No. Finish SM18/BL Black SM18/DB Dark Bronze SM18/GR Verde Green No Option
3" O.D. by .188" wall cast aluminum with K" NPSM fixture mount and hand hole with flush cover. Internal set screw fixture lock accessible through hand hole. Internal ground lug supplied with installed lead. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures.
K" NPSM Fixture Mount 6" Min. (152.4 mm) 12" Max. (304.8 mm)
Optional Concrete (by others)
Surface Mount Cat. No. Finish J-27N/BL Black J-27N/DB Dark Bronze J-27N/GR Verde Green No Option
Cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. 5 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures.
Architectural Wall Mount Cat. No. Finish JW/BL Black JW/DB Dark Bronze JW/GR Verde Green No Option
Die-cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. Canopy attaches to stainless steel wall plate for mounting to any standard electrical outlet box. Super TGIC powder coat paint over titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures.
2F" (55.6 mm)
18" (457.2 mm)
Rigid Conduit (by others)
1L" (44.5 mm)
K" NPSM Fixture Mount
4K" (114.3 mm)
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
3" DIA. (76.2 mm)
J-Box in wall (by others)
5" DIA. (127.0 mm)
K" NPSM Fixture Mount
