SCM Custom Carts SCM Custom Carts

Report 3 Downloads 175 Views
Item _____________________________________ Quantity _________________________________

SCM Custom Carts

CSI Section 11400 Approved ________________________________

Milk Serving Carts

Date _____________________________________

Custom Delfield Model Number • • • •

SCM-36CRT SCM-50CRT SCM-60CRT SCM-74CRT

Milk Milk Milk Milk

Counter Counter Counter Counter

Cart Cart Cart Cart

-

126 252 378 504

Carton Carton Carton Carton

Capacity, Capacity, Capacity, Capacity,

1 2 3 4

Lid Lids Lids Lids

*Milk capacities are based on half pint, 2.75” x 2.75” gable top cartons

Standard Features

• Safety locking hook anchor

• Stainless steel top and exterior body

• One-year parts and labor standard warranty

• Top has die stamped opening(s) and is provided with hinged, stainless steel removable lid(s) • Watertight inner liner has radius corners for easy cleaning • Equipped with a drain plumbed to a drain valve • Refrigerated compartment is equipped with automatic self-leveling, field adjustable elevators • Divider trays supplied • Environmentally friendly, Kyoto Protocal Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warning Potential), polyurethane insulation

SCM-60CRT

• Controls located behind access panel

Options & Accessories

• Outdoor UL approved • Locking security cover • Canopies and signage • Custom graphic packages • Push/pull handles • Stainless steel lid locking device with keyed lock

• Enclosed base

• 10” x 17” x 4” deep chrome wire baskets

• Cord and plug

• Tray slides, cutting boards and work shelves

• All units are standard with 6” diameter, red polyurethane, swivel, locking casters for easy transportation

• Locking overstructure (35” deep base required)

Specifications Exterior Body is constructed of 18-gauge stainless steel side panels and 14-gauge galvanized bottom. All exterior side panels are reinforced with overlapping corners and are welded in place. All body cutouts are reinforced with 14-gauge galvanized channel supports Exterior Top is constructed of 14-gauge stainless steel welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has one (SCM-36), two (SCM-50), three (SCM-60) or four (SCM-74) die stamped openings, and is provided with hinged removable lid. Lids are constructed of stainless steel and have a rubber gasket seal. Refrigerated Compartment has watertight inner liner constructed of 22-gauge stainless steel with radius corners and 1.5” (4cm) of polyurethane, environmentally friendly Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) insulation.

Refrigeration: Copper refrigeration coils are attached to outside of inner liner. Unit is refrigerated by self-contained, 115 volt, 60 hertz, single phase hermetically sealed condensing unit with pressure control. Unit is wired with a 3-wire, grounded, maximum 10’ (3m) 120 volt cord and plug. Refrigeration system use HFC-134a refrigerant. Casters: unit is mounted on 6” diameter, swivel, red casters with non-marking polyurethane wheels and total lock brakes. Overall height of the caster assembly is 7.5” Optional Outdoor UL Approved Equipment: All exposed parts to be built with 201 stainless steel. All switches/controls mounted behind locking hinged panel/ doors. Unit will be wired with waterproof electrical conduit and boxes and a rainproof breaker panel. The cord will be wired with pin/sleeve plug. Floor anchors and lift-off covers for pan openings provided.

Compartment is equipped with a drain plumbed to a drain valve located in the bottom of the unit. Refrigerated compartments is equipped with automatic self-leveling, field adjustable elevators. Divider trays are supplied.

980 S. Isabella Rd. Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619

www.delfield.com

SCM Custom Carts

Project ___________________________________

36.00 [914.40]

50.00 [1270.00]

30.00 [762.00]

30.00 [762.00]

Plan View, SCM-36CRT

Plan View, SCM-50CRT

60.00 [1524.00]

74.00 [1879.60]

SCM Custom Carts

30.00 [762.00]

Plan View, SCM-60CRT

Plan View, SCM-74CRT

38.00 [965.20]



Milk Serving Carts

30.00 [762.00]

7.50 [190.50]

Elevated View, SCM Custom Carts All Models

Specifications V/Hz/Ph

NEMA Plug for Indoor Use

Pin & Sleeve Plug for Outdoor Use (IEC 60309)

Amperage

H.P.

Refrigerant

BTU

Ship Weight

SCM-36CRT

115/60/1

5-15P

320P4W

7.0

1/4

404A

1114

400lbs.

SCM-50CRT

115/60/1

5-15P

320P4W

7.0

1/4

404A

1190

450lbs.

SCM-60CRT

115/60/1

5-15P

320P4W

7.0

1/4

404A

1328

500lbs.

SCM-74CRT

115/60/1

5-15P

320P4W

7.0

1/4

404A

1535

550lbs.

Custom Model

Delfield reserves the right to make changes to the design or specifications without prior notice. 980 S. Isabella Rd. Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com

Printed in the U.S.A. 5403_DSSCMCRT 8/14

Recommend Documents