Screen door lockset

Screen door lockset PARTS INCLUDED Exterior Trim 1 set Lock Faceplate 1 pc Interior Trim 1 set Strike 1 pc Mortise Lock 1 set Dust Proof Strike 1 pc Screw Package: 1. Screw: 8#-32 x 2 pcs, 6#-32 x 2 pcs, 8#-18 (wood) x 4 pcs, 2. Escutcheon connectors x 2 pcs. 3. Spindle x 2 pcs. MOUNTING INSTRUCTIONS FOR WOOD SCREEN DOOR APPLICATIONS Tools required: Tape measure, Drill, drill bits, Philips screwdriver, Pencil, T Square, Chisel. Note: This lock is non-handed. Refer to drawing for orientation based on door handing. Installing the mortise lock 1. Refer to the template and cut a mortise pocket into door edge for lock body. 2. Refer to template and mark and drill screw holes in face of door. 3. Install lock body into the door and supply with supplied wood screws. 4. Insert spindle into interior knob, then through the mortise lock and place the exterior trim on the door and secure with supplied machine screws. Proceed with installing strike after the door set is installed on door. 1. To transfer the proper position to the door jamb, mark the mortise lock by rubbing graphite, crayon or lipstick onto the latch and deadbolt of the mortise lock. 2. Close the door and turn the thumb-turn to activate the deadbolt several times, leaving a faint (graphite, crayon or lipstick) mark on the door frame. 3. The resulting marks will give centering positions for the strike. 4. Mortise a deep pocket for the dust box and a shallow pocket for the strike faceplate. 5. Install the dust box and faceplate and faceplate with supplied screws. CLEANING INSTRUCTIONS To maintain and protect the luster of all products, clean with a soft, damp cloth only. CARE INSTRUCTIONS To maintain and protect the luster of all products, clean with a soft, damp cloth only. To protect the finish, do not use household cleaners or abrasives. CALIFORNIA PROPOSITION 65 WARNING: This product contains brass hardware components which contain lead, a heavy metal known by the State of California to cause cancer, birth defects, or other reproductive harm.

2550 N.W. Nicolai Street, Portland Oregon 97210 Customer Service: 888 401-1900 rejuvenation.com

3

4"

8"

3 1 2"

2 1 4"

4"

2 3 4"

9

5

IMPORTANT NOTE ●

●

ONLY USE "EDGE OF DOOR" LINE FOR YOUR BACKSET PREPARATION. USE " DOOR CENTER LINE" FOR THE MORTISE BOX CUT.

4"

1

16"

2"

SCREW HOLE (THRU)

Fo D rr as o n efe a ot u ren te s c m e e pl th on at is ly e co . py

3

EDGE OF DOOR

ALIGNMENT LINE

DOOR CENTER LINE

DOOR JAMB

Screen door lockset

2 3 8"

1

2"

THUMB TURN KNOB (THRU)

7

8"

7

8"

CL

1

2"

2 3 8"

1

KNOB HOLE (THRU)

2" DEEP CUT OUT

FOR DUST PROOF BOX

1

2"

SCREW HOLE (THRU)

2 5 8" DEEP CUT OUT FOR MORTISE BOX

1

8" DEEP CUT OUT

FOR STRIKE PLATE

1

8" DEEP CUT OUT

FOR FACE PLATE

CL DOOR

1 3 4" BACKSET

2550 N.W. Nicolai Street, Portland Oregon 97210 Customer Service: 888 401-1900 rejuvenation.com

Screen door lockset

Door swings out to the right

2550 N.W. Nicolai Street, Portland Oregon 97210 Customer Service: 888 401-1900 rejuvenation.com

Screen door lockset

Door swings out to the left

2550 N.W. Nicolai Street, Portland Oregon 97210 Customer Service: 888 401-1900 rejuvenation.com