seamless assortment
SEAMLESS ASSORTMENT
DRYGRIP SupraCoat The ultimate foam coating
Safe grip in oily conditions with different levels of protection
WETGRIP Latex
13-1 CLEAN ASSEMBLY Designed for clean touch and lowest environmental impact • Silicon and fingerprint free
10-2 LATEX Winter
EN 388
Pending
15-1 ASSEMBLY NITRILE
13-4 EDGE Latex
Designed for precision handlig in oily or dirty environments
CAT I
• 100 % undyed polyester • A tight and cool fit
15-1 ASSEMBLY Nitrile
ART. NO: 13-1 CA
13-3 HEAT Nitrile
15-1 ASSEMBLY Nitrile II
13-4 EDGE Nitrile
13-6 HEAT Nitrile
ART. NO: 15-1 ANI
EN 388
• SupraCoat advanced waterbased 4131 CAT II PU/Nitrile foam • Excellent breathing • “Micro cup” textured for improved grip • Thin glove with extra fine knitting and elastic close fit • SupraShape egonomic fit • Three colours: Grey, white and white/white
15-1 ASSEMBLY SupraCoat
13-3 COOL SupraCoat
13-5/ 13-6 SUPERCOOL SupraCoat
13-4 EDGE SupraCoat
15-1 ASSEMBLY NITRILE II
CLEAN
4132
Liner 13-3 COOL Low risk
13-3 COOL SUPRACOAT Designed for cut protection at room temperature
CAT II
High risk
Designed for highest cut resistance
13-3 HEAT NITRILE Designed for cut protection in extreme temperatures
EN 388 CAT II
13-5 SUPERCOOL LINER (13-5S)
13-4 EDGE SUPRACOAT
ART. NO: 13-5 ASSC
EN 388
EN 407
4343
X1XXXX
CAT II
• High quality Nitrile coating • ”Micro cup” textured for improved grip • SupraBlockCut and branded Para-aramide provides cut level 3 • SupraShape egonomic fit • EN 407, heat resistent to contact heat 100˚C
• SupraCoat advanced waterbased PU/Nitrile foam • Excellent breathing • ”Micro cup” textured for improved grip • High quality HPPE and fibreglass providing cut level 5 • Very high level of secondary cut protection below the fibreglass • ISO 13997- 35N • ANSI level 5
EN388 – 434X CE kat 2
ART. NO: 13-5 SSC
13-3 HEAT LINER (13-3H) EN388 – 124X CE kat 2 EN 407 – X1XXX
EN388 – 454X CE kat 2
EN 388
• SupraCoat advanced waterbased 4542 PU/Nitrile foam • Excellent breathing • Fibreglass and SupraBlockCut provides cut level 5 (ISO 13997 ~ 28N) • Secondary cut protection below the fibreglass is cut level 2 • SupraShape egonomic fit
13-6 SUPERCOOL SUPRACOAT CAT II
ART. NO: 13-4 ESC
All gloves that contain fibreglass may have a reduced cut resistance after long use or against high pressure cuts.
ART. NO: 15-1 ANI2
Very high risk
4544
13-3 COOL LINER (13-3C)
EN388 – 344X CE kat 2
Medium risk
10-5 FOOD/ 13-5 SUPERCOOL
13-4 EDGE
13-5 SUPERCOOL SUPRACOAT
ART. NO: 13-3 C
13-4 EDGE LINER (13-4E)
13-3 HEAT
EN 388
• HPPE and SupraBlockCut 4342 provide cut level 3 • HPPE activly transport heat from your hand • SupraShape ergonomic fit • SupraCoat advanced waterbased PU/Nitrile foam • Excellent breathing • ”Micro cup” textured for improved grip
General purpose glove with very high cut resistance
CAT II
• High quality Nitrile foam coating • Good breathing • Strongly oil and water repellant • Thin glove with extra fine knitting and elastic close fit • Cool feel
13-1 CLEAN Assembly
INNER GLOVES WHITE/ WHITE (15-1 ASCW)
EN 388
Designed for precision handlig in very oily or dirty environments
ART. NO: 15- ASCG
WHITE (15-1 ASCWG)
CAT II
• High quality Nitrile foam coating • Good breathing • Strongly oil and water repellant • Thin glove with extra fine knitting and elastic close fit • Cool feel
DRYGRIP SupraCoat
15-1 ASSEMBLY SUPRACOAT
EN 388
4131
OILGRIP Nitrile
• Pure waterborne PU
Designed for precision handling
OILGRIP Nitrile
Designed for highest cut, puncture and needle resistance
13-6 HEAT NITRILE EN 388
4544
Puncture, cut and heat resistant glove with oil grip. CAT II
• SupraCoat advanced waterbased PU/Nitrile foam • Excellent breathing • High quality HPPE and fibreglass providing cut level 5 • Very high level of secondary cut protection below the fibreglass and ”Micro cup” textured for improved grip • Lining, SupraBlock ceramic/PU composite on woven Kevlar with skin friendly micropolyester/bamboo inside • SupraBlockCut and branded Para-aramide provides cut level 5 ART. NO: 13-6 SSC
EN 388
4544
CAT II
• High quality textured Nitrile coating • SupraBlockCut and branded Para-aramide provides cut level 5 and (ISO 13997 ~ 60N) • SupraBlock ceramic/PU composite on woven Kevlar with skin friendly micropolyester/bamboo inside glove. • The coating is impregnated with SupraCoat Dry oil and water repellency. ART. NO: 13-6 HNI
EUREKA SAFETY WORKING GLOVES 13-4 EDGE NITRILE General purpose glove with very high cut resistance
EN 388
4542
EUREKA MATERIAL GUIDE
CAT II
• High quality Nitrile coating • ”Micro cup” textured for improved grip • Fibreglass and SupraBlockCut provides cut level 5 • Secondary cut protection below the fibreglass is cut level 2 ART. NO: 13-4 ENI
All gloves that contain fibreglass may have a reduced cut resistance after long use or against high pressure cuts.
WETGRIP Latex
The ultimate foam coating
SupraCoatDry fabric protector
Eureka SupraCoat is made from waterbased and solvent free high quality PU and Nitrile rubber. Our advanced foam coating technology ensures excellent breathing and grip in dry, wet and slightly oily conditions.
Our SupraCoatDry fabric treatment makes the products more water, oil and dirt repellent. SupraCoatDry has a significantly better effect and less environmental impact compared to traditional treatments.
New cut resistant fibre. High strength with excellent bonding to coating and without sensibility to sunlight, bleach or low temperature melting.
Tightly woven para aramid and ceramic composite to stop sharp objects such as needles.
CONTACT
COMPANY
For more information about our products, please contact our sales manager:
Y. Berger & Co AB Tel: + 46 31 49 09 40 Fax: + 46 31 45 64 40
Natural Latex and breathable back – the perfect wet grip combination
• Superior water, oil and dirt repellency • Breathable • New green technology
10-2 LATEX WINTER Designed for general handling in winter conditions
EN 388
2242
• High quality natural Latex • Wrinkle finish on coating for improved grip • Brushed acrylic terry yarn for comfort
CAT II
ART. NO: 10-2 LAWIN
13-4 EDGE LATEX EN 388
3542 • High quality natural Latex • Wrinkle finish on coating for improved grip • Fibreglass and SupraBlockCut provides cut level 5 • Secondary cut protection below the fibreglass is cut level 2
CAT II
ART. NO: 13-4 ELA
All gloves that contain fibreglass may have a reduced cut resistance after long use or against high pressure cuts.
FOOD
Marc Vierstraete Tel: + 46 31 758 99 05 E-mail: [email protected] Questions about orders or similar, please contact our customer service: Tel: +46 31 89 13 79
Gloves designed for the food insdustry 10-5 FOOD EN 388
Designed for the food industry
X5XX
CAT II
• Certified as food safe • HPPE Steel and fibreglass provide cut level 5 • Improved fit • Washable at 95˚C • Blue colour for easy identification ART. NO: 10-5 FOOD
Eureka safety working gloves
Address: Ingela Gathenhielms Gata 3, SE-421 30 Västra Frölunda, Sweden
www.eurekasafety.se
eurekasafety_version 130402
General purpose glove with very high cut resistance
SEAMLESS
DRYGRIP SupraCoat The ultimate foam coating
Safe grip in oily conditions with different levels of protection
WETGRIP Latex
13-1 CLEAN ASSEMBLY Designed for clean touch and lowest environmental impact • Silicon and fingerprint free
10-2 LATEX Winter
EN 388
Pending
15-1 ASSEMBLY NITRILE
13-4 EDGE Latex
Designed for precision handlig in oily or dirty environments
CAT I
• 100 % undyed polyester • A tight and cool fit
15-1 ASSEMBLY Nitrile
ART. NO: 13-1 CA
13-3 HEAT Nitrile
15-1 ASSEMBLY Nitrile II
13-4 EDGE Nitrile
13-6 HEAT Nitrile
ART. NO: 15-1 ANI
EN 388
• SupraCoat advanced waterbased 4131 CAT II PU/Nitrile foam • Excellent breathing • “Micro cup” textured for improved grip • Thin glove with extra fine knitting and elastic close fit • SupraShape egonomic fit • Three colours: Grey, white and white/white
15-1 ASSEMBLY SupraCoat
13-3 COOL SupraCoat
13-5/ 13-6 SUPERCOOL SupraCoat
13-4 EDGE SupraCoat
15-1 ASSEMBLY NITRILE II
CLEAN
4132
Liner 13-3 COOL Low risk
13-3 COOL SUPRACOAT Designed for cut protection at room temperature
CAT II
High risk
Designed for highest cut resistance
13-3 HEAT NITRILE Designed for cut protection in extreme temperatures
EN 388 CAT II
13-5 SUPERCOOL LINER (13-5S)
13-4 EDGE SUPRACOAT
ART. NO: 13-5 ASSC
EN 388
EN 407
4343
X1XXXX
CAT II
• High quality Nitrile coating • ”Micro cup” textured for improved grip • SupraBlockCut and branded Para-aramide provides cut level 3 • SupraShape egonomic fit • EN 407, heat resistent to contact heat 100˚C
• SupraCoat advanced waterbased PU/Nitrile foam • Excellent breathing • ”Micro cup” textured for improved grip • High quality HPPE and fibreglass providing cut level 5 • Very high level of secondary cut protection below the fibreglass • ISO 13997- 35N • ANSI level 5
EN388 – 434X CE kat 2
ART. NO: 13-5 SSC
13-3 HEAT LINER (13-3H) EN388 – 124X CE kat 2 EN 407 – X1XXX
EN388 – 454X CE kat 2
EN 388
• SupraCoat advanced waterbased 4542 PU/Nitrile foam • Excellent breathing • Fibreglass and SupraBlockCut provides cut level 5 (ISO 13997 ~ 28N) • Secondary cut protection below the fibreglass is cut level 2 • SupraShape egonomic fit
13-6 SUPERCOOL SUPRACOAT CAT II
ART. NO: 13-4 ESC
All gloves that contain fibreglass may have a reduced cut resistance after long use or against high pressure cuts.
ART. NO: 15-1 ANI2
Very high risk
4544
13-3 COOL LINER (13-3C)
EN388 – 344X CE kat 2
Medium risk
10-5 FOOD/ 13-5 SUPERCOOL
13-4 EDGE
13-5 SUPERCOOL SUPRACOAT
ART. NO: 13-3 C
13-4 EDGE LINER (13-4E)
13-3 HEAT
EN 388
• HPPE and SupraBlockCut 4342 provide cut level 3 • HPPE activly transport heat from your hand • SupraShape ergonomic fit • SupraCoat advanced waterbased PU/Nitrile foam • Excellent breathing • ”Micro cup” textured for improved grip
General purpose glove with very high cut resistance
CAT II
• High quality Nitrile foam coating • Good breathing • Strongly oil and water repellant • Thin glove with extra fine knitting and elastic close fit • Cool feel
13-1 CLEAN Assembly
INNER GLOVES WHITE/ WHITE (15-1 ASCW)
EN 388
Designed for precision handlig in very oily or dirty environments
ART. NO: 15- ASCG
WHITE (15-1 ASCWG)
CAT II
• High quality Nitrile foam coating • Good breathing • Strongly oil and water repellant • Thin glove with extra fine knitting and elastic close fit • Cool feel
DRYGRIP SupraCoat
15-1 ASSEMBLY SUPRACOAT
EN 388
4131
OILGRIP Nitrile
• Pure waterborne PU
Designed for precision handling
OILGRIP Nitrile
Designed for highest cut, puncture and needle resistance
13-6 HEAT NITRILE EN 388
4544
Puncture, cut and heat resistant glove with oil grip. CAT II
• SupraCoat advanced waterbased PU/Nitrile foam • Excellent breathing • High quality HPPE and fibreglass providing cut level 5 • Very high level of secondary cut protection below the fibreglass and ”Micro cup” textured for improved grip • Lining, SupraBlock ceramic/PU composite on woven Kevlar with skin friendly micropolyester/bamboo inside • SupraBlockCut and branded Para-aramide provides cut level 5 ART. NO: 13-6 SSC
EN 388
4544
CAT II
• High quality textured Nitrile coating • SupraBlockCut and branded Para-aramide provides cut level 5 and (ISO 13997 ~ 60N) • SupraBlock ceramic/PU composite on woven Kevlar with skin friendly micropolyester/bamboo inside glove. • The coating is impregnated with SupraCoat Dry oil and water repellency. ART. NO: 13-6 HNI
EUREKA SAFETY WORKING GLOVES 13-4 EDGE NITRILE General purpose glove with very high cut resistance
EN 388
4542
EUREKA MATERIAL GUIDE
CAT II
• High quality Nitrile coating • ”Micro cup” textured for improved grip • Fibreglass and SupraBlockCut provides cut level 5 • Secondary cut protection below the fibreglass is cut level 2 ART. NO: 13-4 ENI
All gloves that contain fibreglass may have a reduced cut resistance after long use or against high pressure cuts.
WETGRIP Latex
The ultimate foam coating
SupraCoatDry fabric protector
Eureka SupraCoat is made from waterbased and solvent free high quality PU and Nitrile rubber. Our advanced foam coating technology ensures excellent breathing and grip in dry, wet and slightly oily conditions.
Our SupraCoatDry fabric treatment makes the products more water, oil and dirt repellent. SupraCoatDry has a significantly better effect and less environmental impact compared to traditional treatments.
New cut resistant fibre. High strength with excellent bonding to coating and without sensibility to sunlight, bleach or low temperature melting.
Tightly woven para aramid and ceramic composite to stop sharp objects such as needles.
CONTACT
COMPANY
For more information about our products, please contact our sales manager:
Y. Berger & Co AB Tel: + 46 31 49 09 40 Fax: + 46 31 45 64 40
Natural Latex and breathable back – the perfect wet grip combination
• Superior water, oil and dirt repellency • Breathable • New green technology
10-2 LATEX WINTER Designed for general handling in winter conditions
EN 388
2242
• High quality natural Latex • Wrinkle finish on coating for improved grip • Brushed acrylic terry yarn for comfort
CAT II
ART. NO: 10-2 LAWIN
13-4 EDGE LATEX EN 388
3542 • High quality natural Latex • Wrinkle finish on coating for improved grip • Fibreglass and SupraBlockCut provides cut level 5 • Secondary cut protection below the fibreglass is cut level 2
CAT II
ART. NO: 13-4 ELA
All gloves that contain fibreglass may have a reduced cut resistance after long use or against high pressure cuts.
FOOD
Marc Vierstraete Tel: + 46 31 758 99 05 E-mail: [email protected] Questions about orders or similar, please contact our customer service: Tel: +46 31 89 13 79
Gloves designed for the food insdustry 10-5 FOOD EN 388
Designed for the food industry
X5XX
CAT II
• Certified as food safe • HPPE Steel and fibreglass provide cut level 5 • Improved fit • Washable at 95˚C • Blue colour for easy identification ART. NO: 10-5 FOOD
Eureka safety working gloves
Address: Ingela Gathenhielms Gata 3, SE-421 30 Västra Frölunda, Sweden
www.eurekasafety.se
eurekasafety_version 130402
General purpose glove with very high cut resistance
SEAMLESS
