SEF Flex Tape
FlexTape What Is It? SEF’s FlexTape is a self-wound semi-clear Polyester (PET) transfer tape designed to transfer Print & Cut heat transfer material to textiles. FlexTape’s special formulated adhesive is designed to remove printed graphics from its carrier and then at high temperatures, using a heat press, aid in the transfer of the printed graphic to the textile.
FlexTape Advantages • The polyester (PET) FlexTape and adhesive withstands heat pressing cycles as long as 60 seconds at 330°F (166°C). • Protects the surface of printed heat transfer during the heat pressing process as well as during storage and transportation of the graphic. • Keeps multi-component graphics together during the transfer and pressing process. • Because of the sticky adhesive, FlexTape minimizes the risk of the graphic moving after positioning on the textile before and during the heat pressing process. • The exceptional clarity aids in alignment of graphics when doing multi heat transfer overlays. • FlexTape removes easily without any adhesive residue after the heat pressing process. Always refer to the printable film manufacturer’s recommendation for FlexTape’s removal, i.e. Hot, Warm or Cold Peel. • Note: FlexTape transfer tapes work well with ALL brands and types of printable heat activated media, not just polyurethane films.
FlexTape Advantages • The polyester (PET) FlexTape and adhesive withstands heat pressing cycles as long as 60 seconds at 330°F (166°C). • Protects the surface of printed heat transfer during the heat pressing process as well as during storage and transportation of the graphic. • Keeps multi-component graphics together during the transfer and pressing process. • Because of the sticky adhesive, FlexTape minimizes the risk of the graphic moving after positioning on the textile before and during the heat pressing process. • The exceptional clarity aids in alignment of graphics when doing multi heat transfer overlays. • FlexTape removes easily without any adhesive residue after the heat pressing process. Always refer to the printable film manufacturer’s recommendation for FlexTape’s removal, i.e. Hot, Warm or Cold Peel. • Note: FlexTape transfer tapes work well with ALL brands and types of printable heat activated media, not just polyurethane films.
