Self-Tapping Screws
SELF-TAPPING SCREWS Self Tapping Screws Blunt Point
Gimlet point self-tapping screws have various references depending on the standard. BS 4174 referred to as Type AB DIN 7970 referred to as Type B ISO 1478 referred to as Type C
Blunt point self-tapping screws have various references depending on the standard. BS 4174 referred to as Type B DIN 7970 referred to as Type BZ ISO 1478 referred to as Type F
* Max countersunk head diameters are theoretical diameters of head to sharp corners and are the diameter to which holes should be countersunk to enable the screwheads to fit flush with the surface.
ROLLED THREAD MACHINE SCREWS
Manufacturing Standards for Head Tolerances
DIN 7500 THREAD ROLLING SCREWS
Self-Tapping Screws
Self Tapping Screws Gimlet Point
DIN 7504 SELF-DRILLING SCREWS
TECHNICAL DATA 1
FASTENERS FOR SHEET METAL
SCREWS FOR PLASTIC
Tolerances to BS 4174
CD WELD STUDS
Tolerances to DIN 267
Tel Fax
+ 44 (0) 1524 389232 + 44 (0) 1524 66367
Web www.lancasterfastener.co.uk Email [email protected]
163
TECHNICAL DATA
Tolerances to ISO 4759/1
BRASS INSERTS FOR PLASTIC
DEPTH REF
SELF-TAPPING SCREWS
TECHNICAL DATA 1 DIN 7504 SELF-DRILLING SCREWS
Self-Tapping Screws
Self Tapping Screws Gimlet Point
Self Tapping Screws Blunt Point
Gimlet point self-tapping screws have various references depending on the standard. BS 4174 referred to as Type AB DIN 7970 referred to as Type B ISO 1478 referred to as Type C
Blunt point self-tapping screws have various references depending on the standard. BS 4174 referred to as Type B DIN 7970 referred to as Type BZ ISO 1478 referred to as Type F
DIN 7500 THREAD ROLLING SCREWS
Manufacturing Standards for Thread, Length Tolerances and Mechanical Properties
ROLLED THREAD MACHINE SCREWS SCREWS FOR PLASTIC FASTENERS FOR SHEET METAL CD WELD STUDS
Dimensions in Millimetres
BRASS INSERTS FOR PLASTIC TECHNICAL DATA
164
Tel Fax
+ 44 (0) 1524 389232 + 44 (0) 1524 66367
Web www.lancasterfastener.co.uk Email [email protected]
SELF-TAPPING SCREWS Due to the variety of the hardness of metals and the different operating conditions, it may be found necessary to vary these dimensions which should be used only as a guide.
Tel Fax
+ 44 (0) 1524 389232 + 44 (0) 1524 66367
Web www.lancasterfastener.co.uk Email [email protected]
165
TECHNICAL DATA
BRASS INSERTS FOR PLASTIC
CD WELD STUDS
FASTENERS FOR SHEET METAL
SCREWS FOR PLASTIC
ROLLED THREAD MACHINE SCREWS
Recommended Hole Sizes
DIN 7500 THREAD ROLLING SCREWS
Self-Tapping Screws
DIN 7504 SELF-DRILLING SCREWS
TECHNICAL DATA 1
SELF-TAPPING SCREWS
TECHNICAL DATA 2 DIN 7504 SELF-DRILLING SCREWS
Type U Hammer Drive Screws
Manufacturing Standard BS4174
DIN 7500 THREAD ROLLING SCREWS
Head, Thread and Length Tolerances
ROLLED THREAD MACHINE SCREWS Dimensions in Inches
SCREWS FOR PLASTIC FASTENERS FOR SHEET METAL
Dimensions in Millimetres
CD WELD STUDS BRASS INSERTS FOR PLASTIC TECHNICAL DATA
166
Tel Fax
+ 44 (0) 1524 389232 + 44 (0) 1524 66367
Web www.lancasterfastener.co.uk Email [email protected]
Gimlet point self-tapping screws have various references depending on the standard. BS 4174 referred to as Type AB DIN 7970 referred to as Type B ISO 1478 referred to as Type C
Blunt point self-tapping screws have various references depending on the standard. BS 4174 referred to as Type B DIN 7970 referred to as Type BZ ISO 1478 referred to as Type F
* Max countersunk head diameters are theoretical diameters of head to sharp corners and are the diameter to which holes should be countersunk to enable the screwheads to fit flush with the surface.
ROLLED THREAD MACHINE SCREWS
Manufacturing Standards for Head Tolerances
DIN 7500 THREAD ROLLING SCREWS
Self-Tapping Screws
Self Tapping Screws Gimlet Point
DIN 7504 SELF-DRILLING SCREWS
TECHNICAL DATA 1
FASTENERS FOR SHEET METAL
SCREWS FOR PLASTIC
Tolerances to BS 4174
CD WELD STUDS
Tolerances to DIN 267
Tel Fax
+ 44 (0) 1524 389232 + 44 (0) 1524 66367
Web www.lancasterfastener.co.uk Email [email protected]
163
TECHNICAL DATA
Tolerances to ISO 4759/1
BRASS INSERTS FOR PLASTIC
DEPTH REF
SELF-TAPPING SCREWS
TECHNICAL DATA 1 DIN 7504 SELF-DRILLING SCREWS
Self-Tapping Screws
Self Tapping Screws Gimlet Point
Self Tapping Screws Blunt Point
Gimlet point self-tapping screws have various references depending on the standard. BS 4174 referred to as Type AB DIN 7970 referred to as Type B ISO 1478 referred to as Type C
Blunt point self-tapping screws have various references depending on the standard. BS 4174 referred to as Type B DIN 7970 referred to as Type BZ ISO 1478 referred to as Type F
DIN 7500 THREAD ROLLING SCREWS
Manufacturing Standards for Thread, Length Tolerances and Mechanical Properties
ROLLED THREAD MACHINE SCREWS SCREWS FOR PLASTIC FASTENERS FOR SHEET METAL CD WELD STUDS
Dimensions in Millimetres
BRASS INSERTS FOR PLASTIC TECHNICAL DATA
164
Tel Fax
+ 44 (0) 1524 389232 + 44 (0) 1524 66367
Web www.lancasterfastener.co.uk Email [email protected]
SELF-TAPPING SCREWS Due to the variety of the hardness of metals and the different operating conditions, it may be found necessary to vary these dimensions which should be used only as a guide.
Tel Fax
+ 44 (0) 1524 389232 + 44 (0) 1524 66367
Web www.lancasterfastener.co.uk Email [email protected]
165
TECHNICAL DATA
BRASS INSERTS FOR PLASTIC
CD WELD STUDS
FASTENERS FOR SHEET METAL
SCREWS FOR PLASTIC
ROLLED THREAD MACHINE SCREWS
Recommended Hole Sizes
DIN 7500 THREAD ROLLING SCREWS
Self-Tapping Screws
DIN 7504 SELF-DRILLING SCREWS
TECHNICAL DATA 1
SELF-TAPPING SCREWS
TECHNICAL DATA 2 DIN 7504 SELF-DRILLING SCREWS
Type U Hammer Drive Screws
Manufacturing Standard BS4174
DIN 7500 THREAD ROLLING SCREWS
Head, Thread and Length Tolerances
ROLLED THREAD MACHINE SCREWS Dimensions in Inches
SCREWS FOR PLASTIC FASTENERS FOR SHEET METAL
Dimensions in Millimetres
CD WELD STUDS BRASS INSERTS FOR PLASTIC TECHNICAL DATA
166
Tel Fax
+ 44 (0) 1524 389232 + 44 (0) 1524 66367
Web www.lancasterfastener.co.uk Email [email protected]
