Series 7 Trunnion Mounted Ball Valve
DelVal SERIES 7 Two Piece Trunnion Ball Valves
DelTech
ASME Class150, 300, 600, 900, 1500
Leading the Industry with Innovation by Design
Series 7 Trunnion Ball Valves Quality and performance you can count on! DelTech® Controls offers a wide range of DelVal® Trunnion Ball Valves. Our designs are proven performers in the harshest of environments. The DelVal® brand means Performance, Quality and Reliability you can count on. All DelVal® Ball Valves are manufactured and tested in conformance with API 6D specifications and are designed to meet our customers' demanding service conditions. Most DelVal® Ball Valves are designed to mount directly with DelTorq® Pneumatic and Electric Actuators. On some large sizes where direct mounting is not possible, pre-engineered mounting kits are available for close mounting. The valves are manufactured in a modern plant equipped with state-of-theart facilities under a robust quality assurance program complying with ISO 9001-2000. DelVal® Valves and DelTorq® Pneumatic and Electric Actuators and accessories are marketed and sold worldwide by an experienced team of domestic and international representatives. Our sales offices work closely with the representatives to ensure that our customers' expectations are met and exceeded. A network of authorized distributors stock DelVal® and DelTorq® products for immediate delivery to the oil, gas and industrial markets. Our complete API 6D product offering includes flanged, butt weld, ring joint and threaded ends in floating ball and trunnion mounted ball designs. Sizes range from 2” to 12” in 150 to 1500 ASME classes. Contact DelTech Controls or DelVal Flow Controls to learn how one of the cost effective products can help provide solutions for your upstream wellheads and downstream production needs.
Design Features Ball valves are straight-through flow valves which provide shutoff with minimal pressure drop and flow turbulence. The barrier to flow is a ball which is rotated 90 degrees to the direction of the flow. In trunnion mounted valves, the ball is held in a fixed axial position by upper and lower stems (trunnions) and can move only in a rotational mode. The seats are contained in metal carriers which are spring loaded against the ball. Line pressure applied to a closed valve increases the spring load on the upstream seat to effect a tight seal. The primary seating is therefore on the upstream seat permitting trunnion mounted ball valves to be used for “block and bleed” services
As the stem motion from full open to full close is 90 degree rotation, ball valves are ideally suited for automatic operation. All DelVal® Trunnion Ball Valves have a self-relieving seat design. When the body cavity pressure exceeds the downstream seat springs preloaded force, the differential force in the cavity area pushes the downstream seat away from the ball, the body cavity pressure will be relieved automatically. The seat then returns to the ball under spring loaded action. DelVal® Trunnion Ball Valves comply with the design and testing requirements of ANSI B16.34 and API 6D. Installation dimensions comply with ANSI B16.10.
STEM
MACHINED VALVE BORE
Anti-blowout proof stem permits the replacement of the stem seals with the valve in the fully closed or open position.
The valve body bore is completely machined from the edge of flange to the edge of the ball. This machined bore provides less resistance to flow, thereby increasing flow through the valve.
FLOATING SEAT RING
ANTI-STATIC DESIGN
TRUNNION-MOUNTED BALL
Two independent floating seat rings assure the bi-directional tightness of the valve from zero differential pressure to the maximum rated pressure.
All DelVal stems feature anti-static grounding device as standard. These devices ensure electrical continuity between valve ball, stem and body, thus eliminating the possibility of static electrical charges creating sparks within the valve.
The ball is supported and the seat rings are floating, free to move along the flow axis. As the pressure increases the fluid pressure pushes the seat rings against the ball.
SELF-RELIEVING SEAT DESIGN When the valve is in the closed position, media will be trapped in the body cavity. Unless this media is drained, it will be subjected to thermal expansion and contraction. As the temperature rises, the trapped media desires to expand and the pressure increases in the body cavity. In order to avoid excessive pressure build-up, the DelVal seats are designed to self-relieve, allowing the media in the body to escape in to the pipeline.
Design Features
DOUBLE BLOCK AND BLEED Spring loaded floating seats maintain contact with the ball and provide a tight shut off low pressure differential. Independent sealing of upstream and downstream sides facilitate draining of fluid from body cavity, and thus double block and bleed operation.
BODY JOINTS Double seal combination of o-ring and fire safe graphite ensures perfect body joint sealing. DelVal® Trunnion Ball Valves meet or exceed the fugitive emission requirements across a wide range of pressure and temperature applications. Valves are suitable for both above and underground installations.
STEM HSG
STEM
INJECTION FITTING
FIRE SAFE DESIGN DelVal fire safe design consists of a primary soft sealing and a secondary metal seat. A resilient material is inserted into the metal seat holder to provide a soft action in addition to the metal sealing between the ball and the seat rings. In case of fire the soft seat insert burns and allows the spring loaded seat to insure metal to metal sealing against the ball.
ADAPTER SEAT RING
BALL
EMERGENCY SEAT AND STEM SEAL An emergency sealant injection system is available. Each DelVal® Trunnion Ball Valve has a port for sealant injection feature.
Gland Graphite
BODY
O-Rings
Range Size
Stem Housing Ball STEM SEALING A triple stem sealing arrangement prevents leakage to the atmosphere. The unique arrangement consists of a double sealing arrangement with o-rings around the stem and stuffing gland. A graphite seal is also provided at the top of the steam housing.
Pressure Class
Inch
DN
150
300
600
900
1500
2”
50
l
l
l
l
l
3”
80
l
l
l
l
l
4”
100
l
l
l
l
l
6”
150
l
l
l
l
l
8”
200
l
l
l
l
10”
250
l
l
l
l
12”
300
l
l
l
l
See Series 8
High Grade 2 mil (50 micron) ENP carbon steel stems and balls are standard.
Pressure Temperature Ratings & Torque Values 4000 276
CLASS 1500
IN LR DE
3500 241
PEEK
3000 207
2000 138
Temperature Limits :
DEVLON
CLASS 900
NYLON
2500 172
Lower limit
CLASS 300
500 35
VITON
1000 69
Body Matl.
CLASS 600
1500 103
FE RT
Differential Pressure Psi / Bar
Pressure - temperature seat ratings of valves are as given in the graph for body material ASTM A 216 - Gr. WCB. With the exception of body seat rings and primary soft seals, all valve components are capable of withstanding the pressure temperature ratings as specified in ASME B 16.34, BS EN 12516 -1.
CLASS 150
0 0
100 38
200 93
300 149
400 204
500 260
Seat
0 600 316
Temperature Deg F / Deg C
P.T. Ratings
Upper limit
Deg.F
Deg.C
Deg.F
Deg.C
WCB
-20
-29
1000
538
LCB
-50
-46
650
343
CF8
-425
-254
1500
816
CF8M
-425
-254
1500
816
NYLON
-50
-46
200
93
DEVLON
-50
-46
347
175
VITON
-18
-23
400
204
PEEK
-50
-46
400
204
RTFE
-50
-46
400
204
DELRIN
14
-10
200
93
Note : These ratings are a guide for general service. Please consult DelVal for specific recommendations
Torque Values ( Nm / In-lbs.) PRESSURE CLASS SIZE Inch 2"
3"
4"
6"
8"
10"
12"
DN 50
80
100
150
200
250
300
TORQUE TYPE BTO
300
150
600
900
1500
Nm
In-lbs
Nm
In-lbs
Nm
In-lbs
Nm
In-lbs
Nm
In-lbs
68
602
84
743
108
956
133
1177
281
2487
ETC
54
478
67
593
87
770
106
938
225
1991
BTO
168
1487
234
2071
316
2797
427
3779
593
5248
ETC
135
1195
187
1655
253
2239
342
3027
474
4195
BTO
272
2407
359
3177
460
4071
599
5302
922
8160
ETC
218
1929
287
2540
368
3257
479
4239
737
6523
BTO
468
4142
745
6594
1193
10559
1639
14506
2541
22490
ETC
374
3310
596
5275
953
8435
1311
11603
2033
17994
BTO
871
7709
1382
12232
2392
21170
3289
29110
ETC
698
6178
1105
9780
1914
16940
2632
23295
BTO
1177
10417
1823
16135
3105
27482
4234
37474
ETC
942
8337
1445
12789
2459
21764
3387
29977
BTO
1467
12984
2208
19542
3687
32633
5442
48166
ETC
1174
10391
1766
15630
2949
26101
4354
38536
Note :Torque Break to open - When the valve is closed and under pressure, required torque to open the valve. Torque End to close - When the valve is about to close, torque at that position.
See Series 8
Engineering (Full Bore)
ØF
ØG
H
J
ISO TOP
ØB
ØD
RTJ
BUTT WELD END
REFER TO CHART FOR FLANGE DRILLING
A
SERIES 7A, FB CLASS 150 Valve Size INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
A
ØB 51 76 102 152 203 254 305
RF 178 203 229 394 457 533 610
RTJ 191 216 241 406 470 546 622
H BWE 216 282 305 457 521 559 635
ISO TOP
ØF
140 190 200 232 265 330 400
125 150 210 210 210 300 300
H
ØF
PCD 102 125 165 165 165 254 254
HOLEØ 12 14 22 22 22 18 18
ØG NOS 4 4 4 4 4 8 8
J
KEY SIZE
ØD
20 30 40 45 45 45 55
30 45 60 65 65 65 70
6x6 8x7 12x8 14x9 14x9 14x9 16x10
150 190 230 280 345 405 485
ØG
J
KEY SIZE
ØD
FLANGE DRILLING BC 120.7 152.4 190.5 241.3 298.5 362 431.8
HOLEØ 19 19 19 22.2 22.2 25.4 25.4
NOS 4 4 8 8 8 12 12
Wt. (Kg) 11 25 36 130 205 285 370
SERIES 7B, FB CLASS 300 Valve Size
Dimensions (mm)
INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
A
ØB 51 76 102 152 203 254 305
RF 216 282 305 403 502 568 648
RTJ 232 298 321 419 518 584 664
BWE 216 282 305 457 521 559 635
140 190 200 240 290 330 365
125 150 210 210 210 300 300
H
ØF
ISO TOP PCD 102 125 165 165 165 254 254
HOLEØ 12 14 22 22 22 18 18
NOS 4 4 4 4 4 8 8
25 30 40 45 45 45 55
40 45 60 70 70 70 70
8x7 8x7 12x8 14x9 14x9 14x9 16x10
165 210 255 320 380 445 520
ØG
J
KEY SIZE
ØD
FLANGE DRILLING BC 127 168.3 200 269.9 330.2 387.4 450.8
HOLEØ 19 22.2 22.2 22.2 25.4 28.5 31.8
NOS 8 8 8 12 12 16 16
Wt. (Kg) 14 37 52 145 240 360 440
SERIES 7C, FB CLASS 600 Valve Size INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
A
ØB 51 76 102 152 203 254 305
RF 292 356 432 559 660 787 838
RTJ 295 359 435 562 664 791 841
BWE 292 356 432 559 660 787 838
138 190 197 238 287 360 400
125 150 210 210 210 300 350
H
ØF
ISO TOP PCD 102 125 165 165 165 254 298
HOLEØ 12 14 22 22 22 18 22
NOS 4 4 4 4 4 8 8
25 40 40 45 55 63.5 76.2
40 60 60 70 70 102 102
ØG
J
8x7 12x8 14x9 14x9 16x10 15.88x15.88 19.05x19.05
165 210 275 355 420 510 560
FLANGE DRILLING BC 127 168.3 215.9 292.1 349.2 431.8 489
HOLEØ 19 22.2 25.4 28.5 31.8 35 35
NOS 8 8 8 12 12 16 20
Wt. (Kg) 25 65 97 210 460 785 845
SERIES 7D, FB CLASS 900 Valve Size INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
A
ØB 51 76 102 152 203 254 305
RF 368 381 457 610 737 838 965
RTJ 371 384 460 613 740 841 968
BWE 368 381 457 610 737 838 965
150 200 215 255 300 360 400
125 150 210 210 300 300 350
H
ØF
ISO TOP PCD 102 125 165 165 254 254 298
HOLEØ 12 14 22 22 18 18 22
NOS 4 4 4 4 8 8 8
30 45 45 55 55 76.2 76.2
45 70 70 70 70 102 102
ØG
J
KEY SIZE 8x7 14x9 14x9 16x10 16x10 19.05x19.05 19.05x19.05
ØD 215 240 290 380 470 545 610
FLANGE DRILLING BC 165.1 190.5 235 317.5 393.7 469.9 533.4
HOLEØ 25.4 25.4 31.8 31.8 38.1 38.1 38.1
NOS 8 8 8 12 12 16 20
Wt. (Kg) 55 85 127 284 400 845 1115
SERIES 7E, FB CLASS 1500 Valve Size INCH 2" 3" 4" 6"
DN 50 80 100 150
A
ØB 51 76 102 152
RF 368 470 546 705
RTJ 371 473 559 711
BWE 368 470 546 705
175 225 250 280
125 150 210 210
ISO TOP PCD 102 125 165 165
HOLEØ 12 14 22 22
NOS 4 4 4 4
30 45 45 55
45 70 70 70
KEY SIZE
ØD
8x7 14x9 14x9 16x10
215 265 310 395
FLANGE DRILLING BC 165.1 203.2 241.3 317.5
HOLEØ 25.4 31.8 35 38.1
NOS 8 8 8 12
Wt. (Kg) 55 110 165 565
Engineering (Reduced Bore)
ØF
ØG
H
J
ISO TOP
ØB
ØD
RTJ
BUTT WELD END
REFER TO CHART FOR FLANGE DRILLING
A
SERIES 7A, RB CLASS 150 Valve Size INCH 3"x2" 4"x3" 6"x4" 8"x6" 10"x8" 12"x10"
DN 80x50 100x80 150x100 200x150 250x200 300x250
ØB 76 102 152 203 254 305
A RF 203 229 394 457 533 610
RTJ 216 241 406 470 546 622
H BWE 282 305 457 521 559 635
ISO TOP
ØF
140 190 200 232 265 330
125 150 210 210 210 300
H
ØF
PCD 102 125 165 165 165 254
HOLEØ 12 14 22 22 22 18
ØG NOS 4 4 4 4 4 8
J
KEY SIZE
ØD
20 30 40 45 45 45
30 45 60 65 65 65
6x6 8x7 12x8 14x9 14x9 14x9
190 230 280 345 405 485
ØG
J
KEY SIZE
ØD
FLANGE DRILLING BC 152.4 190.5 241.3 298.5 362 431.8
HOLEØ 19 19 22.2 22.2 25.4 25.4
NOS 4 8 8 8 12 12
Wt. (Kg) 20 45 70 170 255 335
SERIES 7B, RB CLASS 300 Valve Size
Dimensions (mm)
INCH 3"x2" 4"x3" 6"x4" 8"x6" 10"x8" 12"x10"
DN 80x50 100x80 150x100 200x150 250x200 300x250
ØB 76 102 152 203 254 305
A RF 282 305 403 502 568 648
RTJ 298 321 419 518 584 664
BWE 282 305 457 521 559 635
140 190 200 240 290 330
125 150 210 210 210 300
H
ØF
ISO TOP PCD 102 125 165 165 165 254
HOLEØ 12 14 22 22 22 18
NOS 4 4 4 4 4 8
25 30 40 45 45 45
40 45 60 70 70 70
8x7 8x7 12x8 14x9 14x9 14x9
210 255 320 380 445 520
ØG
J
KEY SIZE
ØD
FLANGE DRILLING BC 168.3 200 269.9 330.2 387.4 450.8
HOLEØ 22.2 22.2 22.2 25.4 28.5 31.8
NOS 8 8 12 12 16 16
Wt. (Kg) 22 55 100 185 295 440
SERIES 7C, RB CLASS 600 Valve Size INCH 2"x1-1/2" 3"x2" 4"x3" 6"x4" 8"x6" 10"x8" 12"x10"
DN 50x40 80x50 100x80 150x100 200x150 250x200 300x250
ØB 51 76 102 152 203 254 305
A RF 292 356 432 559 660 787 838
RTJ 295 359 435 562 664 791 841
BWE 292 356 432 559 660 787 838
120 138 190 197 238 287 360
125 125 150 210 210 210 300
H
ØF
ISO TOP PCD 70/102 102 125 165 165 165 254
HOLEØ 10/12 12 14 22 22 22 18
NOS 4 4 4 4 4 4 8
20 25 40 40 45 55 63.5
30 40 60 60 70 70 102
ØG
J
6x6 8x7 12x8 14x9 14x9 16x10 15.88X15.88
165 210 275 355 420 510 560
FLANGE DRILLING BC 127 168.3 215.9 292.1 349.2 431.8 489
HOLEØ 19 22.2 25.4 28.5 31.8 35 35
NOS 8 8 8 12 12 16 20
Wt. (Kg) 22 45 88 133 304 605 985
SERIES 7D, RB CLASS 900 Valve Size INCH DN 2"x1-1/2" 50x40 3"x2" 80x50 4"x3" 100x80 6"x4" 150x100 8"x6" 200x150 10"x8" 250x200 12"x10" 300x250
ØB 51 76 102 152 203 254 305
A RF 368 381 457 610 737 838 965
RTJ 371 384 460 613 740 841 968
BWE 368 381 457 610 737 838 965
120 150 200 215 255 300 360
125 125 150 210 210 300 300
H
ØF
ISO TOP PCD 70/102 102 125 165 165 254 254
HOLEØ 10/12 12 14 22 22 18 18
NOS 4 4 4 4 4 8 8
20 30 45 45 55 55 76.2
30 45 70 70 70 70 102
ØG
J
KEY SIZE 6x6 8x7 14x9 14x9 16x10 16x10 19.05X19.05
ØD 215 240 290 380 470 545 610
FLANGE DRILLING BC 165.1 190.5 235 317.5 393.7 469.9 533.4
HOLEØ 25.4 25.4 31.8 31.8 38.1 38.1 38.1
NOS 8 8 8 12 12 16 20
Wt. (Kg) 36 65 115 170 348 785 990
SERIES 7E, RB CLASS 1500 Valve Size ØB INCH DN 2"x1-1/2" 50x40 51 76 3"x2" 80x50 4"x3" 100x80 102 6"x4" 150x100 152
A RF 368 470 546 705
RTJ 371 473 559 711
BWE 368 470 546 705
145 175 225 250
125 125 150 210
ISO TOP PCD 102 102 125 165
HOLEØ 12 12 14 22
NOS 4 4 4 4
25 30 45 45
40 45 70 70
KEY SIZE
ØD
8x7 8x7 14x9 14x9
215 265 310 395
FLANGE DRILLING BC 165.1 203.2 241.3 317.5
HOLEØ 25.4 31.8 35 38.1
NOS 8 8 8 12
Wt. (Kg) 48 80 150 280
Engineering (Full Bore)
ØF
ØG
H
J
ISO TOP
ØB
ØD
RTJ
BUTT WELD END
REFER TO CHART FOR FLANGE DRILLING
A
SERIES 7A, FB CLASS 150 Valve Size INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
ØB 2.00 3.00 4.00 5.98 7.99 10.00 12.00
A RF 7.00 8.00 9.00 15.50 18.00 21.00 24.00
RTJ 7.50 8.50 9.50 16.00 18.50 21.50 24.50
BWE 8.50 11.12 12.00 18.00 20.50 22.00 25.00
H 5.51 7.48 7.87 9.13 10.43 13.00 15.75
ISO TOP
ØF
PCD 4.01 4.92 5.90 4.92 6.50 8.27 6.50 8.27 6.50 8.27 11.81 10.00 11.81 10.00
HOLEØ 0.47 0.55 0.87 0.87 0.87 0.70 0.70
NOS 4 4 4 4 4 8 8
ØG
J
KEY SIZE
ØD
0.787 1.181 1.574 1.772 1.772 1.772 2.165
1.18 1.77 2.36 2.55 2.55 2.55 2.76
0.23x0.23 0.31x0.27 0.47x0.31 0.55x0.35 0.55x0.35 0.55x0.35 0.63x0.39
6.00 7.5 9.00 11.00 13.50 16.00 19.00
ØG
J
KEY SIZE
ØD
0.984 1.181 1.574 1.772 1.772 1.772 2.165
1.57 1.77 2.36 2.76 2.76 2.76 2.76
0.31x0.27 0.31x0.27 0.47x0.31 0.55x0.35 0.55x0.35 0.55x0.35 0.63x0.39
6.50 8.25 10.00 12.50 15.00 17.50 20.50
ØG
J
KEY SIZE
ØD
0.984 1.574 1.574 1.772 2.165 2.500 3.000
1.57 2.36 2.36 2.76 2.76 4.00 4.00
0.31x0.27 0.47x0.31 0.55x0.35 0.55x0.35 0.63x0.39 0.62x0.62 0.75x0.75
6.50 8.25 10.75 14.00 16.50 20.00 22.00
ØG
J
KEY SIZE
ØD
1.181 1.772 1.772 2.165 2.165 3.000 3.000
1.77 2.76 2.76 2.76 2.76 4.00 4.00
0.31x0.27 0.55x0.35 0.55x0.35 0.63x0.39 0.63x0.39 0.75x0.75 0.75X0.75
8.50 9.50 11.50 15.00 18.50 21.50 24.00
ØG
J
KEY SIZE
ØD
1.181 1.772 1.772 2.165
1.77 2.76 2.76 2.76
FLANGE DRILLING BC 4.75 6.00 7.50 9.50 11.75 14.25 17.00
HOLEØ 0.75 0.75 0.75 0.875 0.875 1.00 1.00
NOS 4 4 8 8 8 12 12
Wt. (Lbs) 25 55 80 286 451 627 814
SERIES 7B, FB CLASS 300 Valve Size
Dimensions (Inch)
INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
ØB 2.00 3.00 4.00 5.98 7.99 10.00 12.00
A RF 8.50 11.12 12.00 15.88 19.75 22.38 25.50
RTJ 9.12 11.74 12.62 16.50 20.37 23.00 26.12
BWE 8.50 11.12 12.00 18.00 20.50 22.00 25.00
H 5.51 7.48 7.87 9.44 11.41 13.00 14.37
ISO TOP
ØF
PCD 4.01 4.92 5.90 4.92 6.50 8.27 6.50 8.27 6.50 8.27 11.81 10.00 11.81 10.00
HOLEØ 0.47 0.55 0.87 0.87 0.87 0.70 0.70
NOS 4 4 4 4 4 8 8
FLANGE DRILLING BC 5.00 6.62 7.88 10.62 13.00 15.25 17.75
HOLEØ 0.75 0.875 0.875 0.875 1.00 1.125 1.25
NOS 8 8 8 12 12 16 16
Wt. (Lbs) 31 82 115 319 528 792 968
SERIES 7C, FB CLASS 600 Valve Size INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
ØB 2.00 3.00 4.00 5.98 7.99 10.00 12.00
A RF 11.50 14.00 17.00 22.00 26.00 31.00 33.00
RTJ 11.61 14.13 17.13 22.13 26.14 31.14 33.11
BWE 11.50 14.00 17.00 22.00 26.00 31.00 33.00
H 5.43 7.48 7.76 9.37 11.30 14.17 15.75
ISO TOP
ØF
PCD 4.01 4.92 5.90 4.92 6.50 8.27 6.50 8.27 6.50 8.27 11.81 10.00 13.77 11.73
HOLEØ 0.47 0.55 0.87 0.87 0.87 0.70 0.87
NOS 4 4 4 4 4 8 8
FLANGE DRILLING BC 5.00 6.62 8.50 11.50 13.75 17.00 19.25
HOLEØ 0.75 0.875 1.00 1.12 1.25 1.38 1.38
NOS 8 8 8 12 12 16 20
Wt. (Lbs) 55 143 214 462 1012 1727 1859
SERIES 7D, FB CLASS 900 Valve Size INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
ØB 2.00 3.00 4.00 5.98 7.99 10.00 12.00
A RF 14.50 15.00 18.00 24.00 29.00 33.00 38.00
RTJ 14.61 15.12 18.11 24.13 29.13 33.11 38.11
BWE 14.50 15.00 18.00 24.00 29.00 33.00 38.00
H 5.90 7.87 8.46 10.00 11.81 14.17 15.75
ISO TOP
ØF
PCD 4.01 4.92 5.90 4.92 6.50 8.27 6.50 8.27 11.81 10.00 11.81 10.00 13.77 11.73
HOLEØ 0.47 0.55 0.87 0.87 0.70 0.70 0.87
NOS 4 4 4 4 8 8 8
FLANGE DRILLING BC 6.50 7.50 9.25 12.50 15.50 18.50 21.00
HOLEØ 1.00 1.00 1.25 1.25 1.50 1.50 1.50
NOS 8 8 8 12 12 16 20
Wt. (Lbs) 121 187 280 625 880 1859 2453
SERIES 7E, FB CLASS 1500 Valve Size INCH 2" 3" 4" 6"
DN 50 80 100 150
ØB 2.00 3.00 4.00 5.98
A RF 14.50 18.50 21.50 27.75
RTJ 14.61 18.62 21.61 27.99
BWE 14.50 18.50 21.50 27.75
H
ØF
6.88 8.85 9.84 11.02
4.92 5.90 8.27 8.27
ISO TOP PCD 4.01 4.92 6.50 6.50
HOLEØ 0.47 0.55 0.87 0.87
NOS 4 4 4 4
FLANGE DRILLING
BC 0.31x0.27 8.50 6.50 0.55x0.35 10.50 8.00 0.55x0.35 12.25 9.50 0.63x0.39 15.50 12.50
HOLEØ 1.00 1.25 1.375 1.50
NOS 8 8 8 12
Wt. (Lbs) 121 242 363 1243
Engineering (Reduced Bore)
ØF
ØG
H
J
ISO TOP
ØB
ØD
RTJ
BUTT WELD END
REFER TO CHART FOR FLANGE DRILLING
A
SERIES 7A, RB CLASS 150 Valve Size INCH DN 3"X 2" 80x50 4"X3" 100x80 6"X4" 150x100 8"X6" 200x150 10"X8" 250x200 12"X10" 300x250
ØB 3.00 4.00 5.98 7.99 10.00 12.00
A RF 8.00 9.00 15.50 18.00 21.00 24.00
RTJ 8.50 9.50 16.00 18.50 21.50 24.50
BWE 11.12 12.00 18.00 20.50 22.00 25.00
H 5.51 7.48 7.87 9.13 10.43 13.00
ISO TOP
ØF
PCD 4.01 4.92 5.90 4.92 8.27 6.50 8.27 6.50 8.27 6.50 11.81 10.00
HOLEØ 0.47 0.55 0.87 0.87 0.87 0.70
NOS 4 4 4 4 4 8
ØG
J
KEY SIZE
ØD
0.787 1.181 1.574 1.772 1.772 1.772
1.18 1.77 2.36 2.55 2.55 2.55
0.23x0.23 0.31x0.27 0.47x0.31 0.55x0.35 0.55x0.35 0.55x0.35
7.5 9.00 11.00 13.50 16.00 19.00
ØG
J
KEY SIZE
ØD
0.984 1.181 1.574 1.772 1.772 1.772
1.57 1.77 2.36 2.75 2.75 2.75
0.31x0.27 0.31x0.27 0.47x0.31 0.55x0.35 0.55x0.35 0.55x0.35
6.50 8.25 10.00 12.50 15.00 17.50
ØG
J
KEY SIZE
ØD
0.787 0.984 1.574 1.574 1.772 2.165 2.500
1.18 1.57 2.36 2.36 2.75 2.75 4.00
0.23x0.23 0.31x0.27 0.47x0.31 0.55x0.35 0.55x0.35 0.63x0.39 0.62x0.62
6.50 8.25 10.75 14.00 16.50 20.00 22.00
ØG
J
KEY SIZE
ØD
0.787 1.181 1.772 1.772 2.165 2.165 3.000
1.18 1.77 2.76 2.76 2.76 2.76 4.00
0.23x0.23 0.31x0.27 0.55x0.35 0.55x0.35 0.63x0.39 0.63x0.39 0.75x0.75
8.50 9.50 11.50 15.00 18.50 21.50 24.00
ØG
J
KEY SIZE
ØD
0.984 1.181 1.772 1.772
1.57 1.77 2.76 2.76
0.31x0.27 0.31x0.27 0.55x0.35 0.55x0.35
8.50 10.50 12.25 15.50
FLANGE DRILLING BC 6.00 7.50 9.50 11.75 14.25 17.00
HOLEØ 0.75 0.75 0.875 0.875 1.00 1.00
NOS 4 8 8 8 12 12
Wt. (Lbs) 44 99 154 374 561 737
SERIES 7B, RB CLASS 300 Valve Size
Dimensions (Inch)
INCH DN 3"X 2" 80x50 4"X3" 100x80 6"X4" 150x100 8"X6" 200x150 10"X8" 250x200 12"X10" 300x250
ØB 3.00 4.00 5.98 7.99 10.00 12.00
A RF 11.12 12.00 15.88 19.75 22.38 25.50
RTJ 11.74 12.62 16.50 20.37 23.00 26.12
BWE 11.12 12.00 18.00 20.50 22.00 25.00
H 5.51 7.48 7.87 9.44 11.41 13.00
ISO TOP
ØF
PCD 4.01 4.92 5.90 4.92 8.27 6.50 8.27 6.50 8.27 6.50 11.81 10.00
HOLEØ 0.47 0.55 0.87 0.87 0.87 0.70
NOS 4 4 4 4 4 8
FLANGE DRILLING BC 6.62 7.88 10.62 13.00 15.25 17.75
HOLEØ 0.875 0.875 0.875 1.00 1.125 1.25
NOS 8 8 12 12 16 16
Wt. (Lbs) 49 121 220 407 649 968
SERIES 7C, RB CLASS 600 Valve Size ØB INCH DN 2"x1-1/2" 50x40 2.00 80x50 3.00 3"X2" 4"X3" 100x80 4.00 6"X4" 150x100 5.98 8"X6" 200x150 7.99 10"X8" 250x200 10.00 12"X10" 300x250 12.00
A RF 11.50 14.00 17.00 22.00 26.00 31.00 33.00
RTJ 11.61 14.13 17.12 22.12 26.10 31.10 33.11
BWE 11.50 14.00 17.00 22.00 26.00 31.00 33.00
H
ØF
4.72 5.43 7.48 7.76 9.37 11.30 14.17
4.92 4.92 5.90 8.27 8.27 8.27 11.81
H
ØF
4.72 5.90 7.87 8.46 10.00 11.81 14.17
4.92 4.92 5.90 8.27 8.27 11.81 11.81
H
ØF
5.71 6.88 8.85 9.84
4.92 4.92 5.90 8.27
ISO TOP PCD HOLEØ NOS 2.75/4.01 0.40/0.47 4 0.47 4.01 4 0.55 4.92 4 6.50 0.87 4 6.50 0.87 4 6.50 0.87 4 0.70 10.00 8
FLANGE DRILLING BC 5.00 6.62 8.50 11.50 13.75 17.00 19.25
HOLEØ 0.75 0.875 1.00 1.12 1.25 1.38 1.38
NOS 8 8 8 12 12 16 20
Wt. (Lbs) 48 99 194 293 669 1331 2167
SERIES 7D, RB CLASS 900 Valve Size INCH 2"x1-1/2" 3"X2" 4"X3" 6"X4" 8"X6" 10"X8" 12"X10"
ØB DN 50x40 2.00 80x50 3.00 100x80 4.00 150x100 5.98 200x150 7.99 250x200 10.00 300x250 12.00
A RF RTJ BWE 14.48 14.60 14.48 15.00 15.11 15.00 18.00 18.11 18.00 24.00 24.13 24.00 29.00 29.13 29.00 33.00 33.11 33.00 38.00 38.11 38.00
ISO TOP PCD HOLEØ NOS 2.75/4.01 0.40/0.47 4 0.47 4.01 4 0.55 4.92 4 6.50 0.87 4 6.50 0.87 4 0.70 10.00 8 0.70 10.00 8
FLANGE DRILLING BC 6.50 7.50 9.25 12.50 15.50 18.50 21.00
HOLEØ 1.00 1.00 1.25 1.25 1.50 1.50 1.50
NOS 8 8 8 12 12 16 20
Wt. (Lbs) 80 143 253 374 765 1727 2178
SERIES 7E, RB CLASS 1500 Valve Size DN INCH 2"x1-1/2" 50x40 3"X2" 80x50 4"X3" 100x80 6"X4" 150x100
ØB 2.00 3.00 4.00 5.98
A RF RTJ BWE 14.50 14.61 14.50 18.50 18.62 18.50 21.50 21.61 21.50 27.75 28.00 27.75
ISO TOP PCD 4.01 4.01 4.92 6.50
HOLEØ 0.47 0.47 0.55 0.87
NOS 4 4 4 4
FLANGE DRILLING BC 6.50 8.00 9.50 12.50
HOLEØ 1.00 1.25 1.375 1.50
NOS 8 8 8 12
Wt. (Lbs) 106 176 330 616
Standards Design Standards :- API 6D / ASME 16.34 / EN ISO 17292 ( BS 5351)
Butt Weld Valve Ends :- ASME B 16.25 / 31.3 / 31.4 / 31.5
Inspection & Testing :- API 6D / API 598 / BS EN 12266-1(BS6755 -I)
Drain / Vent / Bypass :- MSS SP 45 / API 6D
Flange Dimensions :- ASME B 16.5 / MSS-SP - 44 / ASME B 16.1
Face to Face :- API 6D / ASME 16.10 / ISO 5752
Fire Safe Test :- API 607 - ISO 10497 - 5 / API 6FA / BS EN 12266-2
Pressure Temperature :- ASME B 16.34 / BS EN 12516 - I
Fire Safe, Primary Metal Secondary Soft Seat Primary metal secondary soft seat has a soft Viton (secondary seal) seat which gets compressed fully due to line pressure and the metal seat does the primary sealing. The secondary soft seal give a bubble tight seat sealing, which is not possible in metal seating. These valves are mostly for gas applications.
Fire Test Ball valves have been designed to meet the requirements of API 607 - ISO 104975 / API 6 FA / BS EN 12266 - 2 . Fire safe tests have been witnessed and certified by DNV.
Operator
Lever Operated For sizes 2” to 4” Class 150/300/600 Standard scope of supply
Gear Operated For sizes 6” to 12” Standard scope of supply Optional for sizes 3” & 4” Class 600
Actuator Operated DelVal® Trunnion Ball Valves sizes 2”-12” are designed to mount directly with DelTorq® Actuators. On sizes where direct mounting is not feasible, pre-engineered brackets and coupling are available.
Material of Construction / Exploded View
Part List DESCRIPTION
SR.NO
BODY / END CONNECTOR :-
01 02 03 04
A351 CF8M / A 351 CF3M / A 351 CF3 / A 351 CF8 / ASTM A216 WCB A 352 LCB / A 352 LCC / A 217 CA15 / DUPLEX SS
BALL :-
05 06 07 08 09
A 216 WCB / A351 CF8 / A 351 CF8M / A 351 CF3M A 182 A105 / A 217 CA15 / DUPLEX SS
STEM :-
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
A322 4140 / A479 SS304 / A 479 SS316 / A 479 SS316 / A 479 SS410 /A 182 F51 / A 182 F316 / A 182 F304 / A 182 F316L
SEAT :A182 A105 + ENP / A 182 F316 / A 182 F6A / DUPLEX SS
SEAT INSERT :DEVLON / NYLON (PA12) / DELRIN / RPTFE / PEEK / PCTFE / CGFT / VITON
STUD / BOLT :ASTM - A 193 B7 / A 193 B7M / A 193 B8M / B8 / ASTM A 320 L7, L7M
NUT :A 194 2H / A 194 2HM / A 194 7M / A 194 8M
16
15 14
BODY SEAT + INSERT SPRING (SEAT) SEAT O-RING BALL STEM THRUST WASHER (STEM) STEM BEARING STEM O-RING STEM HOUSING STEM HOUSING GASKET STEM HOUSING O-RING HEX BOLTS (STEM HOUSING) STEM GASKET GLAND CAP SCREW (GLAND) ANTISTATIC SPRING TRUNNION TRUNNION GASKET TRUNNION O-RING THRUST WASHER (TRUNNION) TRUNNION BEARING HEX BOLTS (TRUNNION) END CONNECTOR BODY GASKET (GRAPHITE) END CONNECTOR O-RING STUDS NUTS INJECTION FITTING DRAIN PLUG STEM KEY
13 10
29 11 12 09 09
28
06
27
08
24
31 07
25 26 04 03
02 02
03 05
04 01
21 22
l lVa De
17
19
23
20
18 30
Exploded View
How to Order Delval Series 7 Ball Valves
TRIM / OTHER VERIABLES / SPECIAL
X
X
X
X
X
X
X
X
X
Bore Type Body/Adaptor Ball / Stem Seat Ring
Series
Size
7 A = Class 150 7 B = Class 300 7 C = Class 600 7 D = Class 900 7 E = Class 1500
02 = 50/2” 03 = 80/3” 04 = 100/4” 06 = 150/6” 08= 200/8” 10 = 250/10” 12 = 300/12”
X
X
X
Seat
Seal
X
X
Actuations Options End Connections
1 = CS NACE 2 = 316 SS NACE
1 = CS NACE F = Full Bore R = Reduced Bore
2 = 316 SS NACE 3 = Low Temp CS NACE
6= Flanged RF 7= Flanged RTJ 8= Butt Weld
1 = RTFE 2 = Devlon 3 = Nylon PA12 4 = Delrin 5 = PEEK 6 = Viton
01 = CS NACE
A = Actuator B = Bare Stem E = Electric G = Gear Opertator H = Handle
1 = Buna N (NBR) 2 = Viton (FKM) 3 = LT Buna N 4 = EPDM 5 = Aflas (400 F) 6 = PC Buna N 7 = Nitrile 8 = James Walker 9 = HNBR
02 = 316 SS NACE 03 = Low Temp CS NACE
0 = None S = Special requirement as specified by customer
For Example : To order 150 / 6" Full Bore, Class 150, Body - WCB, Ball / Stem - SS316 (CF8M), Seat Ring - SS316, Buna Seals, Seat Devlon, Flanged Race Face, Gear Operated with no special requirements.
7
A
0 6
F
0
1
2
2
2
1
6
G
0
DelTech Controls LLC
DelVal Flow Controls Pvt. Ltd.
6068 Highway 73 Geismar, LA 70734 USA
(A division of DelTech Controls LLC, USA) Office & Works : Gat. No 625/1/2, Kuruli, Tal. Khed, Pune-Nasik Highway, Pune 410501, INDIA
Phone: (225) 744-4326
Phone : +91-2135-662700 Fax: +91-2135-662727
Fax:
(225) 744-4328
Email : [email protected] Ó 2010 Deltech Controls. All rights reserved
Email : [email protected]
Website : www.deltechcontrols.com
PC.BLV.005.00
Distributor
TAURUS BFV 03/10
All statements, technical information and recommendations in the bulletin are for general use only. DelTech is not responsible for suitability or compatibility of these products in relation to system requirements. Consult DelTech distributors or factory for the specific requirements and material selection for your intended application. DelTech reserves the right to change or modify product design or product without prior notice. DelVal® - Registered trademark of DelTech Controls.
DelTech
ASME Class150, 300, 600, 900, 1500
Leading the Industry with Innovation by Design
Series 7 Trunnion Ball Valves Quality and performance you can count on! DelTech® Controls offers a wide range of DelVal® Trunnion Ball Valves. Our designs are proven performers in the harshest of environments. The DelVal® brand means Performance, Quality and Reliability you can count on. All DelVal® Ball Valves are manufactured and tested in conformance with API 6D specifications and are designed to meet our customers' demanding service conditions. Most DelVal® Ball Valves are designed to mount directly with DelTorq® Pneumatic and Electric Actuators. On some large sizes where direct mounting is not possible, pre-engineered mounting kits are available for close mounting. The valves are manufactured in a modern plant equipped with state-of-theart facilities under a robust quality assurance program complying with ISO 9001-2000. DelVal® Valves and DelTorq® Pneumatic and Electric Actuators and accessories are marketed and sold worldwide by an experienced team of domestic and international representatives. Our sales offices work closely with the representatives to ensure that our customers' expectations are met and exceeded. A network of authorized distributors stock DelVal® and DelTorq® products for immediate delivery to the oil, gas and industrial markets. Our complete API 6D product offering includes flanged, butt weld, ring joint and threaded ends in floating ball and trunnion mounted ball designs. Sizes range from 2” to 12” in 150 to 1500 ASME classes. Contact DelTech Controls or DelVal Flow Controls to learn how one of the cost effective products can help provide solutions for your upstream wellheads and downstream production needs.
Design Features Ball valves are straight-through flow valves which provide shutoff with minimal pressure drop and flow turbulence. The barrier to flow is a ball which is rotated 90 degrees to the direction of the flow. In trunnion mounted valves, the ball is held in a fixed axial position by upper and lower stems (trunnions) and can move only in a rotational mode. The seats are contained in metal carriers which are spring loaded against the ball. Line pressure applied to a closed valve increases the spring load on the upstream seat to effect a tight seal. The primary seating is therefore on the upstream seat permitting trunnion mounted ball valves to be used for “block and bleed” services
As the stem motion from full open to full close is 90 degree rotation, ball valves are ideally suited for automatic operation. All DelVal® Trunnion Ball Valves have a self-relieving seat design. When the body cavity pressure exceeds the downstream seat springs preloaded force, the differential force in the cavity area pushes the downstream seat away from the ball, the body cavity pressure will be relieved automatically. The seat then returns to the ball under spring loaded action. DelVal® Trunnion Ball Valves comply with the design and testing requirements of ANSI B16.34 and API 6D. Installation dimensions comply with ANSI B16.10.
STEM
MACHINED VALVE BORE
Anti-blowout proof stem permits the replacement of the stem seals with the valve in the fully closed or open position.
The valve body bore is completely machined from the edge of flange to the edge of the ball. This machined bore provides less resistance to flow, thereby increasing flow through the valve.
FLOATING SEAT RING
ANTI-STATIC DESIGN
TRUNNION-MOUNTED BALL
Two independent floating seat rings assure the bi-directional tightness of the valve from zero differential pressure to the maximum rated pressure.
All DelVal stems feature anti-static grounding device as standard. These devices ensure electrical continuity between valve ball, stem and body, thus eliminating the possibility of static electrical charges creating sparks within the valve.
The ball is supported and the seat rings are floating, free to move along the flow axis. As the pressure increases the fluid pressure pushes the seat rings against the ball.
SELF-RELIEVING SEAT DESIGN When the valve is in the closed position, media will be trapped in the body cavity. Unless this media is drained, it will be subjected to thermal expansion and contraction. As the temperature rises, the trapped media desires to expand and the pressure increases in the body cavity. In order to avoid excessive pressure build-up, the DelVal seats are designed to self-relieve, allowing the media in the body to escape in to the pipeline.
Design Features
DOUBLE BLOCK AND BLEED Spring loaded floating seats maintain contact with the ball and provide a tight shut off low pressure differential. Independent sealing of upstream and downstream sides facilitate draining of fluid from body cavity, and thus double block and bleed operation.
BODY JOINTS Double seal combination of o-ring and fire safe graphite ensures perfect body joint sealing. DelVal® Trunnion Ball Valves meet or exceed the fugitive emission requirements across a wide range of pressure and temperature applications. Valves are suitable for both above and underground installations.
STEM HSG
STEM
INJECTION FITTING
FIRE SAFE DESIGN DelVal fire safe design consists of a primary soft sealing and a secondary metal seat. A resilient material is inserted into the metal seat holder to provide a soft action in addition to the metal sealing between the ball and the seat rings. In case of fire the soft seat insert burns and allows the spring loaded seat to insure metal to metal sealing against the ball.
ADAPTER SEAT RING
BALL
EMERGENCY SEAT AND STEM SEAL An emergency sealant injection system is available. Each DelVal® Trunnion Ball Valve has a port for sealant injection feature.
Gland Graphite
BODY
O-Rings
Range Size
Stem Housing Ball STEM SEALING A triple stem sealing arrangement prevents leakage to the atmosphere. The unique arrangement consists of a double sealing arrangement with o-rings around the stem and stuffing gland. A graphite seal is also provided at the top of the steam housing.
Pressure Class
Inch
DN
150
300
600
900
1500
2”
50
l
l
l
l
l
3”
80
l
l
l
l
l
4”
100
l
l
l
l
l
6”
150
l
l
l
l
l
8”
200
l
l
l
l
10”
250
l
l
l
l
12”
300
l
l
l
l
See Series 8
High Grade 2 mil (50 micron) ENP carbon steel stems and balls are standard.
Pressure Temperature Ratings & Torque Values 4000 276
CLASS 1500
IN LR DE
3500 241
PEEK
3000 207
2000 138
Temperature Limits :
DEVLON
CLASS 900
NYLON
2500 172
Lower limit
CLASS 300
500 35
VITON
1000 69
Body Matl.
CLASS 600
1500 103
FE RT
Differential Pressure Psi / Bar
Pressure - temperature seat ratings of valves are as given in the graph for body material ASTM A 216 - Gr. WCB. With the exception of body seat rings and primary soft seals, all valve components are capable of withstanding the pressure temperature ratings as specified in ASME B 16.34, BS EN 12516 -1.
CLASS 150
0 0
100 38
200 93
300 149
400 204
500 260
Seat
0 600 316
Temperature Deg F / Deg C
P.T. Ratings
Upper limit
Deg.F
Deg.C
Deg.F
Deg.C
WCB
-20
-29
1000
538
LCB
-50
-46
650
343
CF8
-425
-254
1500
816
CF8M
-425
-254
1500
816
NYLON
-50
-46
200
93
DEVLON
-50
-46
347
175
VITON
-18
-23
400
204
PEEK
-50
-46
400
204
RTFE
-50
-46
400
204
DELRIN
14
-10
200
93
Note : These ratings are a guide for general service. Please consult DelVal for specific recommendations
Torque Values ( Nm / In-lbs.) PRESSURE CLASS SIZE Inch 2"
3"
4"
6"
8"
10"
12"
DN 50
80
100
150
200
250
300
TORQUE TYPE BTO
300
150
600
900
1500
Nm
In-lbs
Nm
In-lbs
Nm
In-lbs
Nm
In-lbs
Nm
In-lbs
68
602
84
743
108
956
133
1177
281
2487
ETC
54
478
67
593
87
770
106
938
225
1991
BTO
168
1487
234
2071
316
2797
427
3779
593
5248
ETC
135
1195
187
1655
253
2239
342
3027
474
4195
BTO
272
2407
359
3177
460
4071
599
5302
922
8160
ETC
218
1929
287
2540
368
3257
479
4239
737
6523
BTO
468
4142
745
6594
1193
10559
1639
14506
2541
22490
ETC
374
3310
596
5275
953
8435
1311
11603
2033
17994
BTO
871
7709
1382
12232
2392
21170
3289
29110
ETC
698
6178
1105
9780
1914
16940
2632
23295
BTO
1177
10417
1823
16135
3105
27482
4234
37474
ETC
942
8337
1445
12789
2459
21764
3387
29977
BTO
1467
12984
2208
19542
3687
32633
5442
48166
ETC
1174
10391
1766
15630
2949
26101
4354
38536
Note :Torque Break to open - When the valve is closed and under pressure, required torque to open the valve. Torque End to close - When the valve is about to close, torque at that position.
See Series 8
Engineering (Full Bore)
ØF
ØG
H
J
ISO TOP
ØB
ØD
RTJ
BUTT WELD END
REFER TO CHART FOR FLANGE DRILLING
A
SERIES 7A, FB CLASS 150 Valve Size INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
A
ØB 51 76 102 152 203 254 305
RF 178 203 229 394 457 533 610
RTJ 191 216 241 406 470 546 622
H BWE 216 282 305 457 521 559 635
ISO TOP
ØF
140 190 200 232 265 330 400
125 150 210 210 210 300 300
H
ØF
PCD 102 125 165 165 165 254 254
HOLEØ 12 14 22 22 22 18 18
ØG NOS 4 4 4 4 4 8 8
J
KEY SIZE
ØD
20 30 40 45 45 45 55
30 45 60 65 65 65 70
6x6 8x7 12x8 14x9 14x9 14x9 16x10
150 190 230 280 345 405 485
ØG
J
KEY SIZE
ØD
FLANGE DRILLING BC 120.7 152.4 190.5 241.3 298.5 362 431.8
HOLEØ 19 19 19 22.2 22.2 25.4 25.4
NOS 4 4 8 8 8 12 12
Wt. (Kg) 11 25 36 130 205 285 370
SERIES 7B, FB CLASS 300 Valve Size
Dimensions (mm)
INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
A
ØB 51 76 102 152 203 254 305
RF 216 282 305 403 502 568 648
RTJ 232 298 321 419 518 584 664
BWE 216 282 305 457 521 559 635
140 190 200 240 290 330 365
125 150 210 210 210 300 300
H
ØF
ISO TOP PCD 102 125 165 165 165 254 254
HOLEØ 12 14 22 22 22 18 18
NOS 4 4 4 4 4 8 8
25 30 40 45 45 45 55
40 45 60 70 70 70 70
8x7 8x7 12x8 14x9 14x9 14x9 16x10
165 210 255 320 380 445 520
ØG
J
KEY SIZE
ØD
FLANGE DRILLING BC 127 168.3 200 269.9 330.2 387.4 450.8
HOLEØ 19 22.2 22.2 22.2 25.4 28.5 31.8
NOS 8 8 8 12 12 16 16
Wt. (Kg) 14 37 52 145 240 360 440
SERIES 7C, FB CLASS 600 Valve Size INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
A
ØB 51 76 102 152 203 254 305
RF 292 356 432 559 660 787 838
RTJ 295 359 435 562 664 791 841
BWE 292 356 432 559 660 787 838
138 190 197 238 287 360 400
125 150 210 210 210 300 350
H
ØF
ISO TOP PCD 102 125 165 165 165 254 298
HOLEØ 12 14 22 22 22 18 22
NOS 4 4 4 4 4 8 8
25 40 40 45 55 63.5 76.2
40 60 60 70 70 102 102
ØG
J
8x7 12x8 14x9 14x9 16x10 15.88x15.88 19.05x19.05
165 210 275 355 420 510 560
FLANGE DRILLING BC 127 168.3 215.9 292.1 349.2 431.8 489
HOLEØ 19 22.2 25.4 28.5 31.8 35 35
NOS 8 8 8 12 12 16 20
Wt. (Kg) 25 65 97 210 460 785 845
SERIES 7D, FB CLASS 900 Valve Size INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
A
ØB 51 76 102 152 203 254 305
RF 368 381 457 610 737 838 965
RTJ 371 384 460 613 740 841 968
BWE 368 381 457 610 737 838 965
150 200 215 255 300 360 400
125 150 210 210 300 300 350
H
ØF
ISO TOP PCD 102 125 165 165 254 254 298
HOLEØ 12 14 22 22 18 18 22
NOS 4 4 4 4 8 8 8
30 45 45 55 55 76.2 76.2
45 70 70 70 70 102 102
ØG
J
KEY SIZE 8x7 14x9 14x9 16x10 16x10 19.05x19.05 19.05x19.05
ØD 215 240 290 380 470 545 610
FLANGE DRILLING BC 165.1 190.5 235 317.5 393.7 469.9 533.4
HOLEØ 25.4 25.4 31.8 31.8 38.1 38.1 38.1
NOS 8 8 8 12 12 16 20
Wt. (Kg) 55 85 127 284 400 845 1115
SERIES 7E, FB CLASS 1500 Valve Size INCH 2" 3" 4" 6"
DN 50 80 100 150
A
ØB 51 76 102 152
RF 368 470 546 705
RTJ 371 473 559 711
BWE 368 470 546 705
175 225 250 280
125 150 210 210
ISO TOP PCD 102 125 165 165
HOLEØ 12 14 22 22
NOS 4 4 4 4
30 45 45 55
45 70 70 70
KEY SIZE
ØD
8x7 14x9 14x9 16x10
215 265 310 395
FLANGE DRILLING BC 165.1 203.2 241.3 317.5
HOLEØ 25.4 31.8 35 38.1
NOS 8 8 8 12
Wt. (Kg) 55 110 165 565
Engineering (Reduced Bore)
ØF
ØG
H
J
ISO TOP
ØB
ØD
RTJ
BUTT WELD END
REFER TO CHART FOR FLANGE DRILLING
A
SERIES 7A, RB CLASS 150 Valve Size INCH 3"x2" 4"x3" 6"x4" 8"x6" 10"x8" 12"x10"
DN 80x50 100x80 150x100 200x150 250x200 300x250
ØB 76 102 152 203 254 305
A RF 203 229 394 457 533 610
RTJ 216 241 406 470 546 622
H BWE 282 305 457 521 559 635
ISO TOP
ØF
140 190 200 232 265 330
125 150 210 210 210 300
H
ØF
PCD 102 125 165 165 165 254
HOLEØ 12 14 22 22 22 18
ØG NOS 4 4 4 4 4 8
J
KEY SIZE
ØD
20 30 40 45 45 45
30 45 60 65 65 65
6x6 8x7 12x8 14x9 14x9 14x9
190 230 280 345 405 485
ØG
J
KEY SIZE
ØD
FLANGE DRILLING BC 152.4 190.5 241.3 298.5 362 431.8
HOLEØ 19 19 22.2 22.2 25.4 25.4
NOS 4 8 8 8 12 12
Wt. (Kg) 20 45 70 170 255 335
SERIES 7B, RB CLASS 300 Valve Size
Dimensions (mm)
INCH 3"x2" 4"x3" 6"x4" 8"x6" 10"x8" 12"x10"
DN 80x50 100x80 150x100 200x150 250x200 300x250
ØB 76 102 152 203 254 305
A RF 282 305 403 502 568 648
RTJ 298 321 419 518 584 664
BWE 282 305 457 521 559 635
140 190 200 240 290 330
125 150 210 210 210 300
H
ØF
ISO TOP PCD 102 125 165 165 165 254
HOLEØ 12 14 22 22 22 18
NOS 4 4 4 4 4 8
25 30 40 45 45 45
40 45 60 70 70 70
8x7 8x7 12x8 14x9 14x9 14x9
210 255 320 380 445 520
ØG
J
KEY SIZE
ØD
FLANGE DRILLING BC 168.3 200 269.9 330.2 387.4 450.8
HOLEØ 22.2 22.2 22.2 25.4 28.5 31.8
NOS 8 8 12 12 16 16
Wt. (Kg) 22 55 100 185 295 440
SERIES 7C, RB CLASS 600 Valve Size INCH 2"x1-1/2" 3"x2" 4"x3" 6"x4" 8"x6" 10"x8" 12"x10"
DN 50x40 80x50 100x80 150x100 200x150 250x200 300x250
ØB 51 76 102 152 203 254 305
A RF 292 356 432 559 660 787 838
RTJ 295 359 435 562 664 791 841
BWE 292 356 432 559 660 787 838
120 138 190 197 238 287 360
125 125 150 210 210 210 300
H
ØF
ISO TOP PCD 70/102 102 125 165 165 165 254
HOLEØ 10/12 12 14 22 22 22 18
NOS 4 4 4 4 4 4 8
20 25 40 40 45 55 63.5
30 40 60 60 70 70 102
ØG
J
6x6 8x7 12x8 14x9 14x9 16x10 15.88X15.88
165 210 275 355 420 510 560
FLANGE DRILLING BC 127 168.3 215.9 292.1 349.2 431.8 489
HOLEØ 19 22.2 25.4 28.5 31.8 35 35
NOS 8 8 8 12 12 16 20
Wt. (Kg) 22 45 88 133 304 605 985
SERIES 7D, RB CLASS 900 Valve Size INCH DN 2"x1-1/2" 50x40 3"x2" 80x50 4"x3" 100x80 6"x4" 150x100 8"x6" 200x150 10"x8" 250x200 12"x10" 300x250
ØB 51 76 102 152 203 254 305
A RF 368 381 457 610 737 838 965
RTJ 371 384 460 613 740 841 968
BWE 368 381 457 610 737 838 965
120 150 200 215 255 300 360
125 125 150 210 210 300 300
H
ØF
ISO TOP PCD 70/102 102 125 165 165 254 254
HOLEØ 10/12 12 14 22 22 18 18
NOS 4 4 4 4 4 8 8
20 30 45 45 55 55 76.2
30 45 70 70 70 70 102
ØG
J
KEY SIZE 6x6 8x7 14x9 14x9 16x10 16x10 19.05X19.05
ØD 215 240 290 380 470 545 610
FLANGE DRILLING BC 165.1 190.5 235 317.5 393.7 469.9 533.4
HOLEØ 25.4 25.4 31.8 31.8 38.1 38.1 38.1
NOS 8 8 8 12 12 16 20
Wt. (Kg) 36 65 115 170 348 785 990
SERIES 7E, RB CLASS 1500 Valve Size ØB INCH DN 2"x1-1/2" 50x40 51 76 3"x2" 80x50 4"x3" 100x80 102 6"x4" 150x100 152
A RF 368 470 546 705
RTJ 371 473 559 711
BWE 368 470 546 705
145 175 225 250
125 125 150 210
ISO TOP PCD 102 102 125 165
HOLEØ 12 12 14 22
NOS 4 4 4 4
25 30 45 45
40 45 70 70
KEY SIZE
ØD
8x7 8x7 14x9 14x9
215 265 310 395
FLANGE DRILLING BC 165.1 203.2 241.3 317.5
HOLEØ 25.4 31.8 35 38.1
NOS 8 8 8 12
Wt. (Kg) 48 80 150 280
Engineering (Full Bore)
ØF
ØG
H
J
ISO TOP
ØB
ØD
RTJ
BUTT WELD END
REFER TO CHART FOR FLANGE DRILLING
A
SERIES 7A, FB CLASS 150 Valve Size INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
ØB 2.00 3.00 4.00 5.98 7.99 10.00 12.00
A RF 7.00 8.00 9.00 15.50 18.00 21.00 24.00
RTJ 7.50 8.50 9.50 16.00 18.50 21.50 24.50
BWE 8.50 11.12 12.00 18.00 20.50 22.00 25.00
H 5.51 7.48 7.87 9.13 10.43 13.00 15.75
ISO TOP
ØF
PCD 4.01 4.92 5.90 4.92 6.50 8.27 6.50 8.27 6.50 8.27 11.81 10.00 11.81 10.00
HOLEØ 0.47 0.55 0.87 0.87 0.87 0.70 0.70
NOS 4 4 4 4 4 8 8
ØG
J
KEY SIZE
ØD
0.787 1.181 1.574 1.772 1.772 1.772 2.165
1.18 1.77 2.36 2.55 2.55 2.55 2.76
0.23x0.23 0.31x0.27 0.47x0.31 0.55x0.35 0.55x0.35 0.55x0.35 0.63x0.39
6.00 7.5 9.00 11.00 13.50 16.00 19.00
ØG
J
KEY SIZE
ØD
0.984 1.181 1.574 1.772 1.772 1.772 2.165
1.57 1.77 2.36 2.76 2.76 2.76 2.76
0.31x0.27 0.31x0.27 0.47x0.31 0.55x0.35 0.55x0.35 0.55x0.35 0.63x0.39
6.50 8.25 10.00 12.50 15.00 17.50 20.50
ØG
J
KEY SIZE
ØD
0.984 1.574 1.574 1.772 2.165 2.500 3.000
1.57 2.36 2.36 2.76 2.76 4.00 4.00
0.31x0.27 0.47x0.31 0.55x0.35 0.55x0.35 0.63x0.39 0.62x0.62 0.75x0.75
6.50 8.25 10.75 14.00 16.50 20.00 22.00
ØG
J
KEY SIZE
ØD
1.181 1.772 1.772 2.165 2.165 3.000 3.000
1.77 2.76 2.76 2.76 2.76 4.00 4.00
0.31x0.27 0.55x0.35 0.55x0.35 0.63x0.39 0.63x0.39 0.75x0.75 0.75X0.75
8.50 9.50 11.50 15.00 18.50 21.50 24.00
ØG
J
KEY SIZE
ØD
1.181 1.772 1.772 2.165
1.77 2.76 2.76 2.76
FLANGE DRILLING BC 4.75 6.00 7.50 9.50 11.75 14.25 17.00
HOLEØ 0.75 0.75 0.75 0.875 0.875 1.00 1.00
NOS 4 4 8 8 8 12 12
Wt. (Lbs) 25 55 80 286 451 627 814
SERIES 7B, FB CLASS 300 Valve Size
Dimensions (Inch)
INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
ØB 2.00 3.00 4.00 5.98 7.99 10.00 12.00
A RF 8.50 11.12 12.00 15.88 19.75 22.38 25.50
RTJ 9.12 11.74 12.62 16.50 20.37 23.00 26.12
BWE 8.50 11.12 12.00 18.00 20.50 22.00 25.00
H 5.51 7.48 7.87 9.44 11.41 13.00 14.37
ISO TOP
ØF
PCD 4.01 4.92 5.90 4.92 6.50 8.27 6.50 8.27 6.50 8.27 11.81 10.00 11.81 10.00
HOLEØ 0.47 0.55 0.87 0.87 0.87 0.70 0.70
NOS 4 4 4 4 4 8 8
FLANGE DRILLING BC 5.00 6.62 7.88 10.62 13.00 15.25 17.75
HOLEØ 0.75 0.875 0.875 0.875 1.00 1.125 1.25
NOS 8 8 8 12 12 16 16
Wt. (Lbs) 31 82 115 319 528 792 968
SERIES 7C, FB CLASS 600 Valve Size INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
ØB 2.00 3.00 4.00 5.98 7.99 10.00 12.00
A RF 11.50 14.00 17.00 22.00 26.00 31.00 33.00
RTJ 11.61 14.13 17.13 22.13 26.14 31.14 33.11
BWE 11.50 14.00 17.00 22.00 26.00 31.00 33.00
H 5.43 7.48 7.76 9.37 11.30 14.17 15.75
ISO TOP
ØF
PCD 4.01 4.92 5.90 4.92 6.50 8.27 6.50 8.27 6.50 8.27 11.81 10.00 13.77 11.73
HOLEØ 0.47 0.55 0.87 0.87 0.87 0.70 0.87
NOS 4 4 4 4 4 8 8
FLANGE DRILLING BC 5.00 6.62 8.50 11.50 13.75 17.00 19.25
HOLEØ 0.75 0.875 1.00 1.12 1.25 1.38 1.38
NOS 8 8 8 12 12 16 20
Wt. (Lbs) 55 143 214 462 1012 1727 1859
SERIES 7D, FB CLASS 900 Valve Size INCH 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300
ØB 2.00 3.00 4.00 5.98 7.99 10.00 12.00
A RF 14.50 15.00 18.00 24.00 29.00 33.00 38.00
RTJ 14.61 15.12 18.11 24.13 29.13 33.11 38.11
BWE 14.50 15.00 18.00 24.00 29.00 33.00 38.00
H 5.90 7.87 8.46 10.00 11.81 14.17 15.75
ISO TOP
ØF
PCD 4.01 4.92 5.90 4.92 6.50 8.27 6.50 8.27 11.81 10.00 11.81 10.00 13.77 11.73
HOLEØ 0.47 0.55 0.87 0.87 0.70 0.70 0.87
NOS 4 4 4 4 8 8 8
FLANGE DRILLING BC 6.50 7.50 9.25 12.50 15.50 18.50 21.00
HOLEØ 1.00 1.00 1.25 1.25 1.50 1.50 1.50
NOS 8 8 8 12 12 16 20
Wt. (Lbs) 121 187 280 625 880 1859 2453
SERIES 7E, FB CLASS 1500 Valve Size INCH 2" 3" 4" 6"
DN 50 80 100 150
ØB 2.00 3.00 4.00 5.98
A RF 14.50 18.50 21.50 27.75
RTJ 14.61 18.62 21.61 27.99
BWE 14.50 18.50 21.50 27.75
H
ØF
6.88 8.85 9.84 11.02
4.92 5.90 8.27 8.27
ISO TOP PCD 4.01 4.92 6.50 6.50
HOLEØ 0.47 0.55 0.87 0.87
NOS 4 4 4 4
FLANGE DRILLING
BC 0.31x0.27 8.50 6.50 0.55x0.35 10.50 8.00 0.55x0.35 12.25 9.50 0.63x0.39 15.50 12.50
HOLEØ 1.00 1.25 1.375 1.50
NOS 8 8 8 12
Wt. (Lbs) 121 242 363 1243
Engineering (Reduced Bore)
ØF
ØG
H
J
ISO TOP
ØB
ØD
RTJ
BUTT WELD END
REFER TO CHART FOR FLANGE DRILLING
A
SERIES 7A, RB CLASS 150 Valve Size INCH DN 3"X 2" 80x50 4"X3" 100x80 6"X4" 150x100 8"X6" 200x150 10"X8" 250x200 12"X10" 300x250
ØB 3.00 4.00 5.98 7.99 10.00 12.00
A RF 8.00 9.00 15.50 18.00 21.00 24.00
RTJ 8.50 9.50 16.00 18.50 21.50 24.50
BWE 11.12 12.00 18.00 20.50 22.00 25.00
H 5.51 7.48 7.87 9.13 10.43 13.00
ISO TOP
ØF
PCD 4.01 4.92 5.90 4.92 8.27 6.50 8.27 6.50 8.27 6.50 11.81 10.00
HOLEØ 0.47 0.55 0.87 0.87 0.87 0.70
NOS 4 4 4 4 4 8
ØG
J
KEY SIZE
ØD
0.787 1.181 1.574 1.772 1.772 1.772
1.18 1.77 2.36 2.55 2.55 2.55
0.23x0.23 0.31x0.27 0.47x0.31 0.55x0.35 0.55x0.35 0.55x0.35
7.5 9.00 11.00 13.50 16.00 19.00
ØG
J
KEY SIZE
ØD
0.984 1.181 1.574 1.772 1.772 1.772
1.57 1.77 2.36 2.75 2.75 2.75
0.31x0.27 0.31x0.27 0.47x0.31 0.55x0.35 0.55x0.35 0.55x0.35
6.50 8.25 10.00 12.50 15.00 17.50
ØG
J
KEY SIZE
ØD
0.787 0.984 1.574 1.574 1.772 2.165 2.500
1.18 1.57 2.36 2.36 2.75 2.75 4.00
0.23x0.23 0.31x0.27 0.47x0.31 0.55x0.35 0.55x0.35 0.63x0.39 0.62x0.62
6.50 8.25 10.75 14.00 16.50 20.00 22.00
ØG
J
KEY SIZE
ØD
0.787 1.181 1.772 1.772 2.165 2.165 3.000
1.18 1.77 2.76 2.76 2.76 2.76 4.00
0.23x0.23 0.31x0.27 0.55x0.35 0.55x0.35 0.63x0.39 0.63x0.39 0.75x0.75
8.50 9.50 11.50 15.00 18.50 21.50 24.00
ØG
J
KEY SIZE
ØD
0.984 1.181 1.772 1.772
1.57 1.77 2.76 2.76
0.31x0.27 0.31x0.27 0.55x0.35 0.55x0.35
8.50 10.50 12.25 15.50
FLANGE DRILLING BC 6.00 7.50 9.50 11.75 14.25 17.00
HOLEØ 0.75 0.75 0.875 0.875 1.00 1.00
NOS 4 8 8 8 12 12
Wt. (Lbs) 44 99 154 374 561 737
SERIES 7B, RB CLASS 300 Valve Size
Dimensions (Inch)
INCH DN 3"X 2" 80x50 4"X3" 100x80 6"X4" 150x100 8"X6" 200x150 10"X8" 250x200 12"X10" 300x250
ØB 3.00 4.00 5.98 7.99 10.00 12.00
A RF 11.12 12.00 15.88 19.75 22.38 25.50
RTJ 11.74 12.62 16.50 20.37 23.00 26.12
BWE 11.12 12.00 18.00 20.50 22.00 25.00
H 5.51 7.48 7.87 9.44 11.41 13.00
ISO TOP
ØF
PCD 4.01 4.92 5.90 4.92 8.27 6.50 8.27 6.50 8.27 6.50 11.81 10.00
HOLEØ 0.47 0.55 0.87 0.87 0.87 0.70
NOS 4 4 4 4 4 8
FLANGE DRILLING BC 6.62 7.88 10.62 13.00 15.25 17.75
HOLEØ 0.875 0.875 0.875 1.00 1.125 1.25
NOS 8 8 12 12 16 16
Wt. (Lbs) 49 121 220 407 649 968
SERIES 7C, RB CLASS 600 Valve Size ØB INCH DN 2"x1-1/2" 50x40 2.00 80x50 3.00 3"X2" 4"X3" 100x80 4.00 6"X4" 150x100 5.98 8"X6" 200x150 7.99 10"X8" 250x200 10.00 12"X10" 300x250 12.00
A RF 11.50 14.00 17.00 22.00 26.00 31.00 33.00
RTJ 11.61 14.13 17.12 22.12 26.10 31.10 33.11
BWE 11.50 14.00 17.00 22.00 26.00 31.00 33.00
H
ØF
4.72 5.43 7.48 7.76 9.37 11.30 14.17
4.92 4.92 5.90 8.27 8.27 8.27 11.81
H
ØF
4.72 5.90 7.87 8.46 10.00 11.81 14.17
4.92 4.92 5.90 8.27 8.27 11.81 11.81
H
ØF
5.71 6.88 8.85 9.84
4.92 4.92 5.90 8.27
ISO TOP PCD HOLEØ NOS 2.75/4.01 0.40/0.47 4 0.47 4.01 4 0.55 4.92 4 6.50 0.87 4 6.50 0.87 4 6.50 0.87 4 0.70 10.00 8
FLANGE DRILLING BC 5.00 6.62 8.50 11.50 13.75 17.00 19.25
HOLEØ 0.75 0.875 1.00 1.12 1.25 1.38 1.38
NOS 8 8 8 12 12 16 20
Wt. (Lbs) 48 99 194 293 669 1331 2167
SERIES 7D, RB CLASS 900 Valve Size INCH 2"x1-1/2" 3"X2" 4"X3" 6"X4" 8"X6" 10"X8" 12"X10"
ØB DN 50x40 2.00 80x50 3.00 100x80 4.00 150x100 5.98 200x150 7.99 250x200 10.00 300x250 12.00
A RF RTJ BWE 14.48 14.60 14.48 15.00 15.11 15.00 18.00 18.11 18.00 24.00 24.13 24.00 29.00 29.13 29.00 33.00 33.11 33.00 38.00 38.11 38.00
ISO TOP PCD HOLEØ NOS 2.75/4.01 0.40/0.47 4 0.47 4.01 4 0.55 4.92 4 6.50 0.87 4 6.50 0.87 4 0.70 10.00 8 0.70 10.00 8
FLANGE DRILLING BC 6.50 7.50 9.25 12.50 15.50 18.50 21.00
HOLEØ 1.00 1.00 1.25 1.25 1.50 1.50 1.50
NOS 8 8 8 12 12 16 20
Wt. (Lbs) 80 143 253 374 765 1727 2178
SERIES 7E, RB CLASS 1500 Valve Size DN INCH 2"x1-1/2" 50x40 3"X2" 80x50 4"X3" 100x80 6"X4" 150x100
ØB 2.00 3.00 4.00 5.98
A RF RTJ BWE 14.50 14.61 14.50 18.50 18.62 18.50 21.50 21.61 21.50 27.75 28.00 27.75
ISO TOP PCD 4.01 4.01 4.92 6.50
HOLEØ 0.47 0.47 0.55 0.87
NOS 4 4 4 4
FLANGE DRILLING BC 6.50 8.00 9.50 12.50
HOLEØ 1.00 1.25 1.375 1.50
NOS 8 8 8 12
Wt. (Lbs) 106 176 330 616
Standards Design Standards :- API 6D / ASME 16.34 / EN ISO 17292 ( BS 5351)
Butt Weld Valve Ends :- ASME B 16.25 / 31.3 / 31.4 / 31.5
Inspection & Testing :- API 6D / API 598 / BS EN 12266-1(BS6755 -I)
Drain / Vent / Bypass :- MSS SP 45 / API 6D
Flange Dimensions :- ASME B 16.5 / MSS-SP - 44 / ASME B 16.1
Face to Face :- API 6D / ASME 16.10 / ISO 5752
Fire Safe Test :- API 607 - ISO 10497 - 5 / API 6FA / BS EN 12266-2
Pressure Temperature :- ASME B 16.34 / BS EN 12516 - I
Fire Safe, Primary Metal Secondary Soft Seat Primary metal secondary soft seat has a soft Viton (secondary seal) seat which gets compressed fully due to line pressure and the metal seat does the primary sealing. The secondary soft seal give a bubble tight seat sealing, which is not possible in metal seating. These valves are mostly for gas applications.
Fire Test Ball valves have been designed to meet the requirements of API 607 - ISO 104975 / API 6 FA / BS EN 12266 - 2 . Fire safe tests have been witnessed and certified by DNV.
Operator
Lever Operated For sizes 2” to 4” Class 150/300/600 Standard scope of supply
Gear Operated For sizes 6” to 12” Standard scope of supply Optional for sizes 3” & 4” Class 600
Actuator Operated DelVal® Trunnion Ball Valves sizes 2”-12” are designed to mount directly with DelTorq® Actuators. On sizes where direct mounting is not feasible, pre-engineered brackets and coupling are available.
Material of Construction / Exploded View
Part List DESCRIPTION
SR.NO
BODY / END CONNECTOR :-
01 02 03 04
A351 CF8M / A 351 CF3M / A 351 CF3 / A 351 CF8 / ASTM A216 WCB A 352 LCB / A 352 LCC / A 217 CA15 / DUPLEX SS
BALL :-
05 06 07 08 09
A 216 WCB / A351 CF8 / A 351 CF8M / A 351 CF3M A 182 A105 / A 217 CA15 / DUPLEX SS
STEM :-
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
A322 4140 / A479 SS304 / A 479 SS316 / A 479 SS316 / A 479 SS410 /A 182 F51 / A 182 F316 / A 182 F304 / A 182 F316L
SEAT :A182 A105 + ENP / A 182 F316 / A 182 F6A / DUPLEX SS
SEAT INSERT :DEVLON / NYLON (PA12) / DELRIN / RPTFE / PEEK / PCTFE / CGFT / VITON
STUD / BOLT :ASTM - A 193 B7 / A 193 B7M / A 193 B8M / B8 / ASTM A 320 L7, L7M
NUT :A 194 2H / A 194 2HM / A 194 7M / A 194 8M
16
15 14
BODY SEAT + INSERT SPRING (SEAT) SEAT O-RING BALL STEM THRUST WASHER (STEM) STEM BEARING STEM O-RING STEM HOUSING STEM HOUSING GASKET STEM HOUSING O-RING HEX BOLTS (STEM HOUSING) STEM GASKET GLAND CAP SCREW (GLAND) ANTISTATIC SPRING TRUNNION TRUNNION GASKET TRUNNION O-RING THRUST WASHER (TRUNNION) TRUNNION BEARING HEX BOLTS (TRUNNION) END CONNECTOR BODY GASKET (GRAPHITE) END CONNECTOR O-RING STUDS NUTS INJECTION FITTING DRAIN PLUG STEM KEY
13 10
29 11 12 09 09
28
06
27
08
24
31 07
25 26 04 03
02 02
03 05
04 01
21 22
l lVa De
17
19
23
20
18 30
Exploded View
How to Order Delval Series 7 Ball Valves
TRIM / OTHER VERIABLES / SPECIAL
X
X
X
X
X
X
X
X
X
Bore Type Body/Adaptor Ball / Stem Seat Ring
Series
Size
7 A = Class 150 7 B = Class 300 7 C = Class 600 7 D = Class 900 7 E = Class 1500
02 = 50/2” 03 = 80/3” 04 = 100/4” 06 = 150/6” 08= 200/8” 10 = 250/10” 12 = 300/12”
X
X
X
Seat
Seal
X
X
Actuations Options End Connections
1 = CS NACE 2 = 316 SS NACE
1 = CS NACE F = Full Bore R = Reduced Bore
2 = 316 SS NACE 3 = Low Temp CS NACE
6= Flanged RF 7= Flanged RTJ 8= Butt Weld
1 = RTFE 2 = Devlon 3 = Nylon PA12 4 = Delrin 5 = PEEK 6 = Viton
01 = CS NACE
A = Actuator B = Bare Stem E = Electric G = Gear Opertator H = Handle
1 = Buna N (NBR) 2 = Viton (FKM) 3 = LT Buna N 4 = EPDM 5 = Aflas (400 F) 6 = PC Buna N 7 = Nitrile 8 = James Walker 9 = HNBR
02 = 316 SS NACE 03 = Low Temp CS NACE
0 = None S = Special requirement as specified by customer
For Example : To order 150 / 6" Full Bore, Class 150, Body - WCB, Ball / Stem - SS316 (CF8M), Seat Ring - SS316, Buna Seals, Seat Devlon, Flanged Race Face, Gear Operated with no special requirements.
7
A
0 6
F
0
1
2
2
2
1
6
G
0
DelTech Controls LLC
DelVal Flow Controls Pvt. Ltd.
6068 Highway 73 Geismar, LA 70734 USA
(A division of DelTech Controls LLC, USA) Office & Works : Gat. No 625/1/2, Kuruli, Tal. Khed, Pune-Nasik Highway, Pune 410501, INDIA
Phone: (225) 744-4326
Phone : +91-2135-662700 Fax: +91-2135-662727
Fax:
(225) 744-4328
Email : [email protected] Ó 2010 Deltech Controls. All rights reserved
Email : [email protected]
Website : www.deltechcontrols.com
PC.BLV.005.00
Distributor
TAURUS BFV 03/10
All statements, technical information and recommendations in the bulletin are for general use only. DelTech is not responsible for suitability or compatibility of these products in relation to system requirements. Consult DelTech distributors or factory for the specific requirements and material selection for your intended application. DelTech reserves the right to change or modify product design or product without prior notice. DelVal® - Registered trademark of DelTech Controls.
