Series A4000 & Series B4000 Single Row Terminal Blocks Terminal ...
Terminal Blocks - Single Row
A481307
Series A4000 & Series B4000 Single Row Terminal Blocks SPECIFICATIONS Rating: See table. Center Spacing: 0.562” or 9/16” (14.28mm) Wire Range: See rating table. Screw Size: #8-32 or #10-32 zinc-plated slotted screws Torque Rating: #8 screw size 16 lb-in.; #10 screw size 20 lb-in. Distance Between Barriers: 0.47” (11.9mm) Operating Temperature: 105°C (221°F) max., -40°C (-40°F) min. Molded Material: Black, UL Rated 94V0 Thermoplastic Hardware: Bottom studs supplied with nuts assembled. Cup washers are optional on bottom studs but are not recommended with ring terminals. Extended Hex Nuts: Optional extended, slotted hex nuts enable easier installation and removal with hex wrench or screwdriver. Available in bulk for the #10-32 studs on Series A4953 blocks. Specify part number F582 and quantity. Breakdown Voltage: 6100V Agency Information: UL File E62622, CSA File 47235; CE Certified
B484304
A40110407
A4000 Series Dimensions - in (mm) 0.31 (7.9)
0.562 (14.27)
0.87 (22.1)
A B
#8-32 or #10-32 THD’S
RATING TABLE Part Number A4003XX A4011XX A4013XX A4021XX A4035XX A4041XX A4043XX A4051XX A4803XX A4813XX A4843XX A4953XX B4843XX
Terminal Top # 8 Screw # 8 Screw # 8 Screw # 8 Screw # 8 Screw #10 Screw #10 Screw #10 Screw #10 Screw #10 Screw #10 Screw #10 Stud #10 Screw
0.21 (5.3)
Terminal Bottom #8 Stud Solder Solder 0.250 QC Closed Solder Solder 0.250 QC #8 Stud SolderTurret #8 Screw #10 Stud #8 Screw
Wire* Range CU 8-16 AWG 10-16 AWG 10-16 AWG 10-16 AWG 8-16 AWG 10-16 AWG 10-16 AWG 10-16 AWG 8-16 AWG 10-16 AWG 8-16 AWG 8-16 AWG 8-16 AWG
Ratings* Volts/Amps 150V/50A 600V/35A 600V/35A 600V/35A 600V/50A 600V/35A 600V/35A 600V/35A 150V/50A 600V/35A 150V/50A 150V/50A 600V/50A
* All models 30A Max. with 10 AWG; 35-50A ratings with 8 AWG using ring or fork type terminals. Note: 50A rating achieved with #8 copper wire crimped to ring terminal.
Poles
A (in.) Mount Centers
B (in.) Length
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
1.69 2.25 2.81 3.37 3.93 4.50 5.06 5.62 6.18 6.74 7.31 7.87 8.43 8.99 9.55 10.12 10.68
2.12 2.68 3.24 3.80 4.36 4.93 5.34 6.05 6.61 7.17 7.74 8.30 8.86 9.44 9.98 10.55 11.11
* Dimensions in inches. To convert to millimeters, multiply by 25.4.
0.31 (7.9)
1.05 (26.7)
0.57 (14.5)
0.36 dia. (9.1)
Note: Above unit supplied with nuts assembled. Cup washers are optional.
Optional Cup Washers Assembled Available on A4003, A4803, A4843, A4953 & B4843. CUP WASHERS
Reference Panel Cutout for 6 Position Block 0.20 DIA. (5.1)
0.75 (19.1) 3.31 (84.1) 3.93 (99.8)
Terminal Blocks - Single Row
Part Numbering System
A 4 B 4
Base/End
Poles
Screw Options
Options
00 01 02 03 04 05 80
*1 - flat base/ mount end 3 - insulator base(not available in 03 terminal style) /mount end 5 - closed base/ mount end (available in 03 terminal only)
02 to 18
Blank - std. screw 00 - screws shipped bulk 04 - brass nickel-plated 07 - steel SEMS zinc plated (not available with hardware options; not available on A4003, A4803, A4813, A4843, B4843)
A1 to A9 - 0.250” QC †CW - cup washer (pg 20) J301 - flat slip-on jumper (2 position only) L1 to L6 marking options (pg 22) S1 & S2 - solder lugs/flat
A4 - standard B4 - barrier (only available in 84 terminal style)
- screw top; stud bottom - screw top; solder bottom - #8 screw top; 0.250˝ QC bottom - screw top only - #10 screw top; solder term. b. - #10 screw top; 0.250˝ QC bottom - screw top; stud bottom #10-32 top, #8-32 bottom insulated base 81 - screw top; solder turret bottom #10-32 84 - screw top; screw bottom #10-32 95 - stud top; stud bottom #10-32
† Available only on A4003, A4803, A4843, A4953 & B4843.
*Available in 01, 02, 04 & 05 terminal style only.
Terminal Styles
Inches (Millimeters)
Terminal Blocks: Base & Rail Mount
#8-32 SCREW #8-32 or #10-32 SCREW
#8-32 or #10-32 SCREW 0.94 (23.9)
1.41 (35.8)
1.41 (35.8)
1.99 (50.6)
#8-32 HEX NUT
0.43 (10.9)
0.04 (1.0)
0.41 (10.4)
A4003XX
0.17 (4.3)
0.04 (1.0)
0.43 (10.9)
0.36 (9.1)
A4013XX (#8-32) A4043XX (#10-32) #10-32 SCREW
#10-32 SCREW
#8-32 SCREW (TYP)
0.80 (20.3)
0.94 (23.9)
1.56 (39.6)
1.85 (47.0)
1.99 (50.6)
0.59 (15.0)
0.250 (6.35)
#8-32 HEX NUT
A4035XX
0.41 (10.4)
A4813XX
#10-32 STUD
#10-32 SCREW
#10-32 SCREW 1.05 (26.7)
1.55 (39.4)
0.49 (12.5) #10-32 HEX NUT
#8-32 SCREW
A4843XX
0.79 (20.1)
0.30 (7.6)
0.94 (23.9)
1.84 (46.7)
0.09 (2.4)
Jumpers
#8-32 SCREW
0.41 (10.4)
B4843XX
Inches (Millimeters)
(Bulk ordering part numbers are in parentheses.) Quick Connects Blade Width A = 0.250”. (For other orientations, contact factory.)
1.12 (28.4)
*S1 (2S1-J)
J301 (J301-J)
A1 (4A1-J)
A2 (4A2-J)
A3 (4A3-J)
A6 (4A6-J)
A7 (4A7-J)
A8 (4A8-J)
A4 (4A4-J)
*S2 (2S2-J)
*Not available for A4843
A5 (4A5-J)
Compliance References
0.56 (14.3)
Edge Connectors, One-Sided Boards
Solder Lugs
0.41 (10.4)
1.99 (50.6)
A4953XX
Hardware Options
0.36 (9.1)
TURRET
A4803XX
Wire Management Products
A4021XX (#8-32) A4051XX (#10-32)
Power Distribution Blocks
A4011XX (#8-32) A4041XX (#10-32)
#8-32 or #10-32 SCREW
0.03 (0.8)
EuroMag Series
Terminal Style
Terminal Blocks: Single & Double Row
Series
A9 (4A9-J)
A481307
Series A4000 & Series B4000 Single Row Terminal Blocks SPECIFICATIONS Rating: See table. Center Spacing: 0.562” or 9/16” (14.28mm) Wire Range: See rating table. Screw Size: #8-32 or #10-32 zinc-plated slotted screws Torque Rating: #8 screw size 16 lb-in.; #10 screw size 20 lb-in. Distance Between Barriers: 0.47” (11.9mm) Operating Temperature: 105°C (221°F) max., -40°C (-40°F) min. Molded Material: Black, UL Rated 94V0 Thermoplastic Hardware: Bottom studs supplied with nuts assembled. Cup washers are optional on bottom studs but are not recommended with ring terminals. Extended Hex Nuts: Optional extended, slotted hex nuts enable easier installation and removal with hex wrench or screwdriver. Available in bulk for the #10-32 studs on Series A4953 blocks. Specify part number F582 and quantity. Breakdown Voltage: 6100V Agency Information: UL File E62622, CSA File 47235; CE Certified
B484304
A40110407
A4000 Series Dimensions - in (mm) 0.31 (7.9)
0.562 (14.27)
0.87 (22.1)
A B
#8-32 or #10-32 THD’S
RATING TABLE Part Number A4003XX A4011XX A4013XX A4021XX A4035XX A4041XX A4043XX A4051XX A4803XX A4813XX A4843XX A4953XX B4843XX
Terminal Top # 8 Screw # 8 Screw # 8 Screw # 8 Screw # 8 Screw #10 Screw #10 Screw #10 Screw #10 Screw #10 Screw #10 Screw #10 Stud #10 Screw
0.21 (5.3)
Terminal Bottom #8 Stud Solder Solder 0.250 QC Closed Solder Solder 0.250 QC #8 Stud SolderTurret #8 Screw #10 Stud #8 Screw
Wire* Range CU 8-16 AWG 10-16 AWG 10-16 AWG 10-16 AWG 8-16 AWG 10-16 AWG 10-16 AWG 10-16 AWG 8-16 AWG 10-16 AWG 8-16 AWG 8-16 AWG 8-16 AWG
Ratings* Volts/Amps 150V/50A 600V/35A 600V/35A 600V/35A 600V/50A 600V/35A 600V/35A 600V/35A 150V/50A 600V/35A 150V/50A 150V/50A 600V/50A
* All models 30A Max. with 10 AWG; 35-50A ratings with 8 AWG using ring or fork type terminals. Note: 50A rating achieved with #8 copper wire crimped to ring terminal.
Poles
A (in.) Mount Centers
B (in.) Length
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
1.69 2.25 2.81 3.37 3.93 4.50 5.06 5.62 6.18 6.74 7.31 7.87 8.43 8.99 9.55 10.12 10.68
2.12 2.68 3.24 3.80 4.36 4.93 5.34 6.05 6.61 7.17 7.74 8.30 8.86 9.44 9.98 10.55 11.11
* Dimensions in inches. To convert to millimeters, multiply by 25.4.
0.31 (7.9)
1.05 (26.7)
0.57 (14.5)
0.36 dia. (9.1)
Note: Above unit supplied with nuts assembled. Cup washers are optional.
Optional Cup Washers Assembled Available on A4003, A4803, A4843, A4953 & B4843. CUP WASHERS
Reference Panel Cutout for 6 Position Block 0.20 DIA. (5.1)
0.75 (19.1) 3.31 (84.1) 3.93 (99.8)
Terminal Blocks - Single Row
Part Numbering System
A 4 B 4
Base/End
Poles
Screw Options
Options
00 01 02 03 04 05 80
*1 - flat base/ mount end 3 - insulator base(not available in 03 terminal style) /mount end 5 - closed base/ mount end (available in 03 terminal only)
02 to 18
Blank - std. screw 00 - screws shipped bulk 04 - brass nickel-plated 07 - steel SEMS zinc plated (not available with hardware options; not available on A4003, A4803, A4813, A4843, B4843)
A1 to A9 - 0.250” QC †CW - cup washer (pg 20) J301 - flat slip-on jumper (2 position only) L1 to L6 marking options (pg 22) S1 & S2 - solder lugs/flat
A4 - standard B4 - barrier (only available in 84 terminal style)
- screw top; stud bottom - screw top; solder bottom - #8 screw top; 0.250˝ QC bottom - screw top only - #10 screw top; solder term. b. - #10 screw top; 0.250˝ QC bottom - screw top; stud bottom #10-32 top, #8-32 bottom insulated base 81 - screw top; solder turret bottom #10-32 84 - screw top; screw bottom #10-32 95 - stud top; stud bottom #10-32
† Available only on A4003, A4803, A4843, A4953 & B4843.
*Available in 01, 02, 04 & 05 terminal style only.
Terminal Styles
Inches (Millimeters)
Terminal Blocks: Base & Rail Mount
#8-32 SCREW #8-32 or #10-32 SCREW
#8-32 or #10-32 SCREW 0.94 (23.9)
1.41 (35.8)
1.41 (35.8)
1.99 (50.6)
#8-32 HEX NUT
0.43 (10.9)
0.04 (1.0)
0.41 (10.4)
A4003XX
0.17 (4.3)
0.04 (1.0)
0.43 (10.9)
0.36 (9.1)
A4013XX (#8-32) A4043XX (#10-32) #10-32 SCREW
#10-32 SCREW
#8-32 SCREW (TYP)
0.80 (20.3)
0.94 (23.9)
1.56 (39.6)
1.85 (47.0)
1.99 (50.6)
0.59 (15.0)
0.250 (6.35)
#8-32 HEX NUT
A4035XX
0.41 (10.4)
A4813XX
#10-32 STUD
#10-32 SCREW
#10-32 SCREW 1.05 (26.7)
1.55 (39.4)
0.49 (12.5) #10-32 HEX NUT
#8-32 SCREW
A4843XX
0.79 (20.1)
0.30 (7.6)
0.94 (23.9)
1.84 (46.7)
0.09 (2.4)
Jumpers
#8-32 SCREW
0.41 (10.4)
B4843XX
Inches (Millimeters)
(Bulk ordering part numbers are in parentheses.) Quick Connects Blade Width A = 0.250”. (For other orientations, contact factory.)
1.12 (28.4)
*S1 (2S1-J)
J301 (J301-J)
A1 (4A1-J)
A2 (4A2-J)
A3 (4A3-J)
A6 (4A6-J)
A7 (4A7-J)
A8 (4A8-J)
A4 (4A4-J)
*S2 (2S2-J)
*Not available for A4843
A5 (4A5-J)
Compliance References
0.56 (14.3)
Edge Connectors, One-Sided Boards
Solder Lugs
0.41 (10.4)
1.99 (50.6)
A4953XX
Hardware Options
0.36 (9.1)
TURRET
A4803XX
Wire Management Products
A4021XX (#8-32) A4051XX (#10-32)
Power Distribution Blocks
A4011XX (#8-32) A4041XX (#10-32)
#8-32 or #10-32 SCREW
0.03 (0.8)
EuroMag Series
Terminal Style
Terminal Blocks: Single & Double Row
Series
A9 (4A9-J)
