Show 'N' Sell self-contained refrigerated display cases - Amazon Web ...
PROJECT ITEM # QUANTITY
DATE
APPROVAL
7000 Show ’N’ Sell self-contained refrigerated display cases Short form specifications Exterior top and ends shall be finished with 22-gauge stainless steel. Exterior front shall be finished with stainless steel and plastic laminate trim. Interior ends shall be ABS plastic. Interior bottom shall be 22-gauge stainless steel. Cabinet shall be insulated with foamed-in-place polyurethane. Interior shall have (2) 15" (38.1 cm) deep removable epoxy-coated wire shelves. Cabinet shall have (2) 36" (91.4 cm) long fluorescent light fixtures. Refrigeration system shall use HFC-404A refrigerant, and maintain 36°F (2°C) to 40°F (4°C) interior cabinet temperature at 100°F (38°C) ambient room temperature. Electrical connections shall be 115 volt, 60 Hertz, single phase. Unit shall be wired with a 3-wire, grounded, maximum 8' (2.4 m) cord and plug.
The following applies to 7000-M (single service mirrorback) models only: (2) 0.5" (1.3 cm) thick, bottom-mounted thermopane glass doors shall be provided in the front of the equipment. Doors shall be sliding, self-closing and removable for cleaning. Exterior back shall be 22-gauge aluminum. Interior back of cabinet shall have a 0.25" (0.6 cm) thick mirror mounted vertically.
Model 7048-M
The following applies to 7000-S (single service seethrough) models only: (2) 0.5" (1.3 cm) thick, bottom-mounted thermopane glass doors shall be provided in the front of the equipemnt. Doors shall be sliding, self-closing and removable for cleaning. Exterior back to be finished with stainless steel and plastic laminate trim. Interior back of cabinet shall have a 0.5" (1.3 cm) thick thermopane glass panel.
The following applies to 7000-P (double service passthrough) models only: (4) 0.5" (1.3 cm) thick, bottom-mounted thermopane glass doors shall be provided, (2) each in the front and back of the equipment. Doors shall be sliding, self-closing and removable for cleaning.
Optional accessories & modifications *220 volt, 50 Hertz electrical system Wall-mounting kit Sliding door lock (4) 6" (15.2 cm) high stainless steel legs Extra epoxy-coated wire shelf *Inclusion of this option will alter the electrical specifications of the unit.
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
7000
Show ’N’ Sell self-contained refrigerated display cases
24.37" 61.9cm
48.37" 122.9 cm
Entry Access
24.37" 61.9 cm
18.75" 47.6cm
25.0"/6.4 cm 15.00" 38.1cm 18.50" 47.0cm
PLAN VIEW ALL 7000 MODELS
RIGHT END VIEW 7000-M and 7000-S MODELS
Entry Side ( Serving View)
24.37" 61.9cm
25.12" 63.8cm
Height shown is without optional legs. Add 6" (15.2 cm) if equipped with legs.
Inside dimension (horizontal): 37.62"/95.6cm
18.75" 47.6cm
25.0"/6.4 cm 15.00" 38.1cm 18.50" 47.0cm
RIGHT END VIEW 7000-P MODELS
ELEVATION VIEW ALL 7000 MODELS
Equipment must be installed in a level area away from any source of intense heat, including ranges and ovens. Proper air flow must be provided to the machine compartment. Do not install this equipment in a location which closes off both the side and rear ventilation of the machine compartment. Either the side or front ventilation must be left open with a minimum clearance of 6" (15.2 cm).
2.75" 7.0cm
12.00" 30.5cm
EXIT LOCATION FOR CORD ALL 7000 MODELS
CAPACITY
SHIP WEIGHT
HORSEPOWER
VOLTS/ HERTZ/ PHASE
AMPS
NEMA PLUG
12.5 ft2¤ 1.16 m2¤
7.8 ft3 0.22 m3
284 lbs 129 kg
1/4
115/60/1
9.0
5-15P
Double service, pass through
12.5 ft2¤ 1.16 m2¤
7.8 ft3 0.22 m3
292 lbs 132 kg
1/4
115/60/1
9.0
5-15P
Single service, glass back
12.5 ft2¤ 1.16 m2¤
7.8 ft3 0.22 m3
282 lbs 128 kg
1/4
115/60/1
9.0
5-15P
MODEL NUMBER
DESCRIPTION
SHELVES
7048-M
Single service, mirror back
7048-P 7048-S
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A. DS7000 02/02
DATE
APPROVAL
7000 Show ’N’ Sell self-contained refrigerated display cases Short form specifications Exterior top and ends shall be finished with 22-gauge stainless steel. Exterior front shall be finished with stainless steel and plastic laminate trim. Interior ends shall be ABS plastic. Interior bottom shall be 22-gauge stainless steel. Cabinet shall be insulated with foamed-in-place polyurethane. Interior shall have (2) 15" (38.1 cm) deep removable epoxy-coated wire shelves. Cabinet shall have (2) 36" (91.4 cm) long fluorescent light fixtures. Refrigeration system shall use HFC-404A refrigerant, and maintain 36°F (2°C) to 40°F (4°C) interior cabinet temperature at 100°F (38°C) ambient room temperature. Electrical connections shall be 115 volt, 60 Hertz, single phase. Unit shall be wired with a 3-wire, grounded, maximum 8' (2.4 m) cord and plug.
The following applies to 7000-M (single service mirrorback) models only: (2) 0.5" (1.3 cm) thick, bottom-mounted thermopane glass doors shall be provided in the front of the equipment. Doors shall be sliding, self-closing and removable for cleaning. Exterior back shall be 22-gauge aluminum. Interior back of cabinet shall have a 0.25" (0.6 cm) thick mirror mounted vertically.
Model 7048-M
The following applies to 7000-S (single service seethrough) models only: (2) 0.5" (1.3 cm) thick, bottom-mounted thermopane glass doors shall be provided in the front of the equipemnt. Doors shall be sliding, self-closing and removable for cleaning. Exterior back to be finished with stainless steel and plastic laminate trim. Interior back of cabinet shall have a 0.5" (1.3 cm) thick thermopane glass panel.
The following applies to 7000-P (double service passthrough) models only: (4) 0.5" (1.3 cm) thick, bottom-mounted thermopane glass doors shall be provided, (2) each in the front and back of the equipment. Doors shall be sliding, self-closing and removable for cleaning.
Optional accessories & modifications *220 volt, 50 Hertz electrical system Wall-mounting kit Sliding door lock (4) 6" (15.2 cm) high stainless steel legs Extra epoxy-coated wire shelf *Inclusion of this option will alter the electrical specifications of the unit.
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
7000
Show ’N’ Sell self-contained refrigerated display cases
24.37" 61.9cm
48.37" 122.9 cm
Entry Access
24.37" 61.9 cm
18.75" 47.6cm
25.0"/6.4 cm 15.00" 38.1cm 18.50" 47.0cm
PLAN VIEW ALL 7000 MODELS
RIGHT END VIEW 7000-M and 7000-S MODELS
Entry Side ( Serving View)
24.37" 61.9cm
25.12" 63.8cm
Height shown is without optional legs. Add 6" (15.2 cm) if equipped with legs.
Inside dimension (horizontal): 37.62"/95.6cm
18.75" 47.6cm
25.0"/6.4 cm 15.00" 38.1cm 18.50" 47.0cm
RIGHT END VIEW 7000-P MODELS
ELEVATION VIEW ALL 7000 MODELS
Equipment must be installed in a level area away from any source of intense heat, including ranges and ovens. Proper air flow must be provided to the machine compartment. Do not install this equipment in a location which closes off both the side and rear ventilation of the machine compartment. Either the side or front ventilation must be left open with a minimum clearance of 6" (15.2 cm).
2.75" 7.0cm
12.00" 30.5cm
EXIT LOCATION FOR CORD ALL 7000 MODELS
CAPACITY
SHIP WEIGHT
HORSEPOWER
VOLTS/ HERTZ/ PHASE
AMPS
NEMA PLUG
12.5 ft2¤ 1.16 m2¤
7.8 ft3 0.22 m3
284 lbs 129 kg
1/4
115/60/1
9.0
5-15P
Double service, pass through
12.5 ft2¤ 1.16 m2¤
7.8 ft3 0.22 m3
292 lbs 132 kg
1/4
115/60/1
9.0
5-15P
Single service, glass back
12.5 ft2¤ 1.16 m2¤
7.8 ft3 0.22 m3
282 lbs 128 kg
1/4
115/60/1
9.0
5-15P
MODEL NUMBER
DESCRIPTION
SHELVES
7048-M
Single service, mirror back
7048-P 7048-S
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A. DS7000 02/02
