Sony Clie PEG-UX50 Tilt Screen Replacement
Sony Clie PEG-UX50 Tilt Screen Replacement
Sony Clie PEG-UX50 Tilt Screen Replacement This guide gives you an insight on how to remove the tilt screen on a Sony Clie PEG-UX50
Written By: Rishad R Rai
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Sony Clie PEG-UX50 Tilt Screen Replacement
INTRODUCTION The Sony Clie PEG-UX50 has a separate tilt screen mechanism that does not require the user to dismantle the battery plate in order to get to the display .
TOOLS: Phillips #1 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Sony Clie PEG-UX50 Tilt Screen Replacement
Step 1 — Tilt Screen
Take off the screws located on the 2 sides of the tilt screen.
Unscrew the screw located at the tilt base of the screen
Step 2
Gently remove back plate of tilt screen by sliding upward.
With caution, lift wires from the track in the back plate
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Sony Clie PEG-UX50 Tilt Screen Replacement
Step 3
Disconnect the thin bus cable attached to the Integrated Circuit
Step 4
Detach the plastic black frame from in between the plate and lcd.
Do not disconnect the display from the board yet.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
Sony Clie PEG-UX50 Tilt Screen Replacement
Step 5
Disconnect the thin connector from the face plate using the tweezer
With your hands, quick-release and disconnect the thick cable
Step 6
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-13 06:30:47 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
Sony Clie PEG-UX50 Tilt Screen Replacement This guide gives you an insight on how to remove the tilt screen on a Sony Clie PEG-UX50
Written By: Rishad R Rai
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Sony Clie PEG-UX50 Tilt Screen Replacement
INTRODUCTION The Sony Clie PEG-UX50 has a separate tilt screen mechanism that does not require the user to dismantle the battery plate in order to get to the display .
TOOLS: Phillips #1 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Sony Clie PEG-UX50 Tilt Screen Replacement
Step 1 — Tilt Screen
Take off the screws located on the 2 sides of the tilt screen.
Unscrew the screw located at the tilt base of the screen
Step 2
Gently remove back plate of tilt screen by sliding upward.
With caution, lift wires from the track in the back plate
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Sony Clie PEG-UX50 Tilt Screen Replacement
Step 3
Disconnect the thin bus cable attached to the Integrated Circuit
Step 4
Detach the plastic black frame from in between the plate and lcd.
Do not disconnect the display from the board yet.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
Sony Clie PEG-UX50 Tilt Screen Replacement
Step 5
Disconnect the thin connector from the face plate using the tweezer
With your hands, quick-release and disconnect the thick cable
Step 6
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-13 06:30:47 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
