Special Session: Drilling Modelling and Simulation Welcome
Special Session: Drilling Modelling and Simulation Welcome
Junichi Sugiura, Schlumberger Joachim Oppelt, Baker Hughes [email protected], [email protected], [email protected], On 29 Oct 2014, SPE ATCE @ RAI, Amsterdam, The Netherland
Slide 2
Session Abstract • Drilling systems modelling and simulation has become one of the key factors for advancing automation/control, intelligent managed pressure drilling, and drilling optimization by understanding and predicting downhole performance and dynamics”
• This session brings some of the global modelling and simulation experts together, to identify its current state, needs, and future goals. • Diverse technologists in the academia and industry are working to identify concepts, issues and solutions on a variety of challenges in drilling modelling and simulation. “Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 3
The Scope (Coverage) of “Drilling” Modelling and Simulation • This session covers the modelling and simulation methods of “drilling systems/processes”; hence, component-level modelling and simulation (e.g. PSPICE® electrical circuit modelling, ANSYS® fatigue analysis modelling, etc) will not be discussed. • However, the component-level modelling may be used in the system-level modelling. • A paper (SPE-173045-MS) accepted and written for the 2015 SPE/IADC Drilling Conference (in London).
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 4
Schedule Time:
8:30 – 11:55 a.m.
8:30 – 8:35 a.m. 8:35 – 8:40 a.m. 8:40 – 9:10 a.m. 9:10 – 9:30 a.m. 9:30 – 9:50 a.m. 9:50 – 10:10 a.m.
10:10 – 10:40 a.m. 10:40 – 10:45 a.m. 10:45 – 11:15 a.m. 11:15 – 11:50 a.m. 11:50 – 11:55 a.m.
Opening Remarks and Welcome Introduction of Speakers Speaker 1 (25 min + 5min Q&A) Speaker 2 (15 min + 5min Q&A) Speaker 3 (15 min + 5min Q&A) Speaker 4 (15 min + 5min Q&A)
Junichi Sugiura Junichi Sugiura George Ostermeyer Geoff Downton Robello Samuel Colin Mason
Coffee Break Introduction of Panels Current State Future Goals Thanks speakers and attendees
Joachim Oppelt Moderator: JO/JS Moderator: JS/JO Joachim Oppelt
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 “Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 5
Chairs, Speakers and Panelists Chairs
Junichi Sugiura
Joachim Oppelt
Speakers
George Ostermeyer
John Hedengren
Geoff Downton
Robello Samuel
Colin Mason
Paul Pastusek
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 6
Friendly Reminder • Please put your mobile devices in the “silent”/meeting mode. No noise please. • Please do not take any recordings or photos. Everything is SPE-copyrighted. • The use of the mobile devices is allowed, for example, taking notes and other purposes (explained later). The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 “Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 7
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Slide 9
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Slide 11
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Slide 13
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Slide 15
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Special Session: Drilling Modelling and Simulation Panel Discussion Section
Joachim Oppelt, Baker Hughes Junichi Sugiura, Schlumberger
Slide 18
Moderators and Panelists Moderators
Junichi Sugiura
Joachim Oppelt
Panelists
George Ostermeyer
John Hedengren
Geoff Downton
Robello Samuel
Colin Mason
Paul Pastusek
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Special Session: Drilling Modelling and Simulation “Current State”
Joachim Oppelt, Baker Hughes Junichi Sugiura, Schlumberger
Slide 20
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Colin J Mason
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Question 1 What can we accomplish with the current drilling systems modelling and simulations? (example areas below) • • •
Drilling Systems Automation/Control Intelligent managed pressure drilling Drilling optimization by understanding/predicting downhole dynamics
Excerpted from George Ostermeyer’s presentation “Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Question 2 What are the technical challenges and limitations of the current drilling systems modelling and simulations?
Excerpted from Geoff Downton’s presentation
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 24
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Question 3 What are the non-technical challenges (e.g. validation, certification, user competency, etc)? What is the operator’s perspective on this?
Excerpted from Geoff Downton’s presentation
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Special Session: Drilling Modelling and Simulation “Future Goals”
Junichi Sugiura, Schlumberger Joachim Oppelt, Baker Hughes
Question 4 What and how can we improve the current drilling systems modelling and simulation? How can we overcome uncertainties, modelling limitations, modelling complexity, etc?
Excerpted from Geoff Downton’s presentation
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Question 5 What impact can the improved modelling and simulation bring to the drilling industry? What areas of drilling may be positively influenced?
Excerpted from Robello Samuel’s presentation
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 30
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Question 6 What is the justification for investing so much on modelling/simulation (M/S)? What are the “applications” of modelling and simulation, as M&S do not have a value in itself (just interesting research?)
Excerpted from Geoff Downton’s presentation
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 33
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Question 7 How can we improve information exchange between researchers (industry and academia) globally? Who can provide a close-to-complete overview of what is going on globally?
Excerpted from Robello Samuel’s presentation “Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 36
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Slide 38
Thank You Special Session: Drilling Modelling and Simulation On 29 Oct 2014, SPE ATCE @ RAI, Amsterdam, The Netherland
Junichi Sugiura, Schlumberger Joachim Oppelt, Baker Hughes [email protected], [email protected], [email protected],
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Junichi Sugiura, Schlumberger Joachim Oppelt, Baker Hughes [email protected], [email protected], [email protected], On 29 Oct 2014, SPE ATCE @ RAI, Amsterdam, The Netherland
Slide 2
Session Abstract • Drilling systems modelling and simulation has become one of the key factors for advancing automation/control, intelligent managed pressure drilling, and drilling optimization by understanding and predicting downhole performance and dynamics”
• This session brings some of the global modelling and simulation experts together, to identify its current state, needs, and future goals. • Diverse technologists in the academia and industry are working to identify concepts, issues and solutions on a variety of challenges in drilling modelling and simulation. “Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 3
The Scope (Coverage) of “Drilling” Modelling and Simulation • This session covers the modelling and simulation methods of “drilling systems/processes”; hence, component-level modelling and simulation (e.g. PSPICE® electrical circuit modelling, ANSYS® fatigue analysis modelling, etc) will not be discussed. • However, the component-level modelling may be used in the system-level modelling. • A paper (SPE-173045-MS) accepted and written for the 2015 SPE/IADC Drilling Conference (in London).
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 4
Schedule Time:
8:30 – 11:55 a.m.
8:30 – 8:35 a.m. 8:35 – 8:40 a.m. 8:40 – 9:10 a.m. 9:10 – 9:30 a.m. 9:30 – 9:50 a.m. 9:50 – 10:10 a.m.
10:10 – 10:40 a.m. 10:40 – 10:45 a.m. 10:45 – 11:15 a.m. 11:15 – 11:50 a.m. 11:50 – 11:55 a.m.
Opening Remarks and Welcome Introduction of Speakers Speaker 1 (25 min + 5min Q&A) Speaker 2 (15 min + 5min Q&A) Speaker 3 (15 min + 5min Q&A) Speaker 4 (15 min + 5min Q&A)
Junichi Sugiura Junichi Sugiura George Ostermeyer Geoff Downton Robello Samuel Colin Mason
Coffee Break Introduction of Panels Current State Future Goals Thanks speakers and attendees
Joachim Oppelt Moderator: JO/JS Moderator: JS/JO Joachim Oppelt
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 “Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 5
Chairs, Speakers and Panelists Chairs
Junichi Sugiura
Joachim Oppelt
Speakers
George Ostermeyer
John Hedengren
Geoff Downton
Robello Samuel
Colin Mason
Paul Pastusek
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 6
Friendly Reminder • Please put your mobile devices in the “silent”/meeting mode. No noise please. • Please do not take any recordings or photos. Everything is SPE-copyrighted. • The use of the mobile devices is allowed, for example, taking notes and other purposes (explained later). The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 “Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 7
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Slide 9
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Slide 11
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Slide 13
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Slide 15
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Special Session: Drilling Modelling and Simulation Panel Discussion Section
Joachim Oppelt, Baker Hughes Junichi Sugiura, Schlumberger
Slide 18
Moderators and Panelists Moderators
Junichi Sugiura
Joachim Oppelt
Panelists
George Ostermeyer
John Hedengren
Geoff Downton
Robello Samuel
Colin Mason
Paul Pastusek
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Special Session: Drilling Modelling and Simulation “Current State”
Joachim Oppelt, Baker Hughes Junichi Sugiura, Schlumberger
Slide 20
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Colin J Mason
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Question 1 What can we accomplish with the current drilling systems modelling and simulations? (example areas below) • • •
Drilling Systems Automation/Control Intelligent managed pressure drilling Drilling optimization by understanding/predicting downhole dynamics
Excerpted from George Ostermeyer’s presentation “Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Question 2 What are the technical challenges and limitations of the current drilling systems modelling and simulations?
Excerpted from Geoff Downton’s presentation
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 24
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Question 3 What are the non-technical challenges (e.g. validation, certification, user competency, etc)? What is the operator’s perspective on this?
Excerpted from Geoff Downton’s presentation
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Special Session: Drilling Modelling and Simulation “Future Goals”
Junichi Sugiura, Schlumberger Joachim Oppelt, Baker Hughes
Question 4 What and how can we improve the current drilling systems modelling and simulation? How can we overcome uncertainties, modelling limitations, modelling complexity, etc?
Excerpted from Geoff Downton’s presentation
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Question 5 What impact can the improved modelling and simulation bring to the drilling industry? What areas of drilling may be positively influenced?
Excerpted from Robello Samuel’s presentation
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 30
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Question 6 What is the justification for investing so much on modelling/simulation (M/S)? What are the “applications” of modelling and simulation, as M&S do not have a value in itself (just interesting research?)
Excerpted from Geoff Downton’s presentation
“Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 33
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Question 7 How can we improve information exchange between researchers (industry and academia) globally? Who can provide a close-to-complete overview of what is going on globally?
Excerpted from Robello Samuel’s presentation “Drilling Modelling and Simulation” • Junichi Sugiura and Joachim Oppelt
Slide 36
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014 Special Session • Drilling Modelling – Polling Questions • Junichi Sugiura
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
Slide 38
Thank You Special Session: Drilling Modelling and Simulation On 29 Oct 2014, SPE ATCE @ RAI, Amsterdam, The Netherland
Junichi Sugiura, Schlumberger Joachim Oppelt, Baker Hughes [email protected], [email protected], [email protected],
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
The SSID is ATCE2014 and password atce2014 Go to pollev.com/atce2014
