Specific ations - Moen
Speci fic at ions There is more than 1 version of this model Page down to identify the version you have
DESCRIPTION • Metal construction with various finishes identified by suffix • Installed on 6" (152mm) to 16" (406mm) centers • 1/2" IPS connections • Diverter valve includes an integral vacuum breaker • Includes metal pop-up type waste assembly OPERATION • Lever style handles • Hot side counterclockwise to open (clockwise to close) • Cold side clockwise to open (counterclockwise to close) • Water flow is diverted by turning the knob counterclockwise for fill and clockwise for rosetta spray CARTRIDGE • 116719 diverter cartridge • 1234 cartridge design for hot and cold valves • Nonmetallic and stainless steel material STANDARDS • Third party certified to meet ASME A112.18.1/CSA B-125.1, and all requirements referenced therein • ADA for lever handles WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations
EVA™ Two Handle Bidet with Metal Waste Assembly Models: T5220 series Valve: 9265 NOTE: Minimum Diameter Holes for Installation Diverter Valve - 1-1/8" (29mm) Handle Valves - 1-1/8" (29mm) Spray Nozzle - 5/8" (16mm) Lift Rod Escutcheon - 1/2" (13mm)
6" (152mm) MIN. 16" (406mm) MAX 3" (76mm) MIN. 3" (76mm)
DIVERTING MECHANISM
5-1/8" (130mm)
2-7/16" (62mm) DIAMETER
2-7/8" (73mm) 2-1/8" (53mm)
2-3/16" (55mm)
1-1/4" (32MM) MAX DECK THICKNESS
SPRAY NOZZLE
7/8" (22MM) MAX DECK THICKNESS
CRITICAL DIMENSIONS (DO NOT SCALE)
4/15
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com
Speci fic at ions DESCRIPTION • Metal construction with chrome plated, oil rubbed bronze, or LifeShine® brushed nickel finish • Installed on 6" (152mm) to 16" (406mm) centers • 1/2" IPS connections will accept standard ball nose connection for 3/8" tubing • Diverter valve includes an integral vacuum breaker • Includes metal pop-up type waste assembly OPERATION • Lever style handles, 180˚ rotation • Hot side counterclockwise to open (clockwise to close) • Cold side clockwise to open (counterclockwise to close) • Water flow is diverted by turning the knob counterclockwise for fill and clockwise for rosetta spray CARTRIDGE • 94831 diverter cartridge • 1224 cartridge design for hot and cold valves • Nonmetallic and stainless steel material STANDARDS • Third party certified by CSA to meet CSA B-125,ASME A112.18.1M and all requirements referenced therein WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations
EVA™ Two Handle Bidet with Metal Waste Assembly Models: T5220, T5220BN, T5220ORB
NOTE: The 9200 valve cannot be used with Non Rim Flush Bidet Fixtures
NOTE: Minimum Diameter Holes for Installation Diverter Valve - 1” (25mm) Handle Valves - 1-1/8” (29mm) Spray Nozzle - 5/8” (16mm) Lift Rod Escutcheon - 1/2” (13mm)
6" (152mm) MIN. 16" (406mm) MAX. 3" (76mm) MIN. 3" (76mm)
3-1/2" (89mm)
DIVERTING MECHANISM 2-1/2" (64mm) CRITICAL LEVEL
HANDLE BASE 2-7/16" (62mm) DIAMETER
5-1/8" (130mm) 2" (51mm)
1-1/4" (32mm) MAX. DECK THICKNESS
SPRAY NOZZLE
HOT INLET
FLEXIBLE CONNECTORS
COLD INLET
LIFT ROD
7/8" (22mm) MAX.
2-1/8" (53mm)
3/8" DIA. SUPPLY TUBE
CRITICAL DIMENSIONS (DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com
DESCRIPTION • Metal construction with various finishes identified by suffix • Installed on 6" (152mm) to 16" (406mm) centers • 1/2" IPS connections • Diverter valve includes an integral vacuum breaker • Includes metal pop-up type waste assembly OPERATION • Lever style handles • Hot side counterclockwise to open (clockwise to close) • Cold side clockwise to open (counterclockwise to close) • Water flow is diverted by turning the knob counterclockwise for fill and clockwise for rosetta spray CARTRIDGE • 116719 diverter cartridge • 1234 cartridge design for hot and cold valves • Nonmetallic and stainless steel material STANDARDS • Third party certified to meet ASME A112.18.1/CSA B-125.1, and all requirements referenced therein • ADA for lever handles WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations
EVA™ Two Handle Bidet with Metal Waste Assembly Models: T5220 series Valve: 9265 NOTE: Minimum Diameter Holes for Installation Diverter Valve - 1-1/8" (29mm) Handle Valves - 1-1/8" (29mm) Spray Nozzle - 5/8" (16mm) Lift Rod Escutcheon - 1/2" (13mm)
6" (152mm) MIN. 16" (406mm) MAX 3" (76mm) MIN. 3" (76mm)
DIVERTING MECHANISM
5-1/8" (130mm)
2-7/16" (62mm) DIAMETER
2-7/8" (73mm) 2-1/8" (53mm)
2-3/16" (55mm)
1-1/4" (32MM) MAX DECK THICKNESS
SPRAY NOZZLE
7/8" (22MM) MAX DECK THICKNESS
CRITICAL DIMENSIONS (DO NOT SCALE)
4/15
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com
Speci fic at ions DESCRIPTION • Metal construction with chrome plated, oil rubbed bronze, or LifeShine® brushed nickel finish • Installed on 6" (152mm) to 16" (406mm) centers • 1/2" IPS connections will accept standard ball nose connection for 3/8" tubing • Diverter valve includes an integral vacuum breaker • Includes metal pop-up type waste assembly OPERATION • Lever style handles, 180˚ rotation • Hot side counterclockwise to open (clockwise to close) • Cold side clockwise to open (counterclockwise to close) • Water flow is diverted by turning the knob counterclockwise for fill and clockwise for rosetta spray CARTRIDGE • 94831 diverter cartridge • 1224 cartridge design for hot and cold valves • Nonmetallic and stainless steel material STANDARDS • Third party certified by CSA to meet CSA B-125,ASME A112.18.1M and all requirements referenced therein WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations
EVA™ Two Handle Bidet with Metal Waste Assembly Models: T5220, T5220BN, T5220ORB
NOTE: The 9200 valve cannot be used with Non Rim Flush Bidet Fixtures
NOTE: Minimum Diameter Holes for Installation Diverter Valve - 1” (25mm) Handle Valves - 1-1/8” (29mm) Spray Nozzle - 5/8” (16mm) Lift Rod Escutcheon - 1/2” (13mm)
6" (152mm) MIN. 16" (406mm) MAX. 3" (76mm) MIN. 3" (76mm)
3-1/2" (89mm)
DIVERTING MECHANISM 2-1/2" (64mm) CRITICAL LEVEL
HANDLE BASE 2-7/16" (62mm) DIAMETER
5-1/8" (130mm) 2" (51mm)
1-1/4" (32mm) MAX. DECK THICKNESS
SPRAY NOZZLE
HOT INLET
FLEXIBLE CONNECTORS
COLD INLET
LIFT ROD
7/8" (22mm) MAX.
2-1/8" (53mm)
3/8" DIA. SUPPLY TUBE
CRITICAL DIMENSIONS (DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com
