Specifications - AJ Madison

Report 0 Downloads 205 Views

5-3/16". (131mm). DESCRIPTION. • Hydrolock™ quick connect system. • Metal construction with various finishes identified by suffix. • 1/2" IPS connections. • Includes hot and cold indicators. • Includes metal pop-up type waste assembly. OPERATION. • Lever style handles. • Maximum handle rotation angle is 90˚ to full on for ...

Specifications DESCRIPTION • • • • •

Hydrolock™ quick connect system Metal construction with various finishes identified by suffix 1/2" IPS connections Includes hot and cold indicators Includes metal pop-up type waste assembly

OPERATION • • • •

Lever style handles Maximum handle rotation angle is 90˚ to full on for either handle Hot side counterclockwise to open (clockwise to close) Cold side clockwise to open (counterclockwise to close)

FLOW •

Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)

KINGSLEY™

CARTRIDGE • •

Two-Handle Widespread Lavatory Faucet

1224 cartridge design Nonmetallic and stainless steel material

STANDARDS • • • •

Third party certified to WaterSense,® ASME A112.18.1/CSA B-125.1, ICC A117.1 and all applicable requirements referenced therein Certified to ANSI/NSF 61/9 Complies with California Proposition 65 and with the Federal Safe Drinking Water Act

ADA

Models: T6105 series Valve: 9000, 69000

for lever handle

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 3 HOLES, 1-1/8" MIN. DIA.

WARRANTY • •

Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser 5 year warranty if used in commercial installations

2-7/8" (73mm)

SPOUT BASE 2-3/4" (70mm) DIAMETER

2-7/8" (73mm)

SPOUT

3-1/4" (82mm)

AERATOR HANDLE BASE 2-7/16" (62mm) DIAMETER

1-9/16" (40mm)

1-1/4" (32mm) MAX. DECK THICKNESS

5-3/16" (131mm)

Quick Connect Hose Assembly HOT INLET

8" (203mm) - 16"(406mm) CENTERS

1-1/2" (38mm)

COLD INLET

CRITICAL DIMENSIONS (DO NOT SCALE)

Rev. 4/09

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com

Recommend Documents
Echelon E1060i. 35 5/8”. 26 3/4”. Echelon E790i. 35 5/8”. 26 3/4”. Echelon E660i. 35 5/8”. 26 3/4”. Aurora 790i. 35 7/8”. 26 3/8”. Aurora A660i. 32 1/4”. 25”.

Pivot action lever style handle. • Temperature controlled through 180˚ degree arc of handle travel. FLOW. • Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, ... Complies with California Proposition 65 and with the Federal Safe Drinking Water

Braided stainless steel hand spray hose. • Forward-Only handle = No backsplash interference. • Easy-Clean rubberized spray face. • Solid brass construction.

Use of non-approved disposers may void Elkay warranty. InSinkErator, Quick Lock and the mounting collar configuration are trademarks of. Emerson Electric Co.

CRITICAL DIMENSIONS. (DO NOT SCALE). Vestige™. Two Handle Widespread. Lavatory Faucet. Models: T6305 series. Valve: 9000, 69000. NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED. THRU 3 HOLES, 1-1/8" MIN. DIA. 3-1/2”. (88mm). 2“ (50mm). Escutcheon

WAR RANTY. Blanco America's Platinum Series sinks feature a. “NO HASSLE” LIMITED LIFETIME WARRANTY to be free of all manufacturing defects under normal use. See our complete warranty for details. While Blanco America endeavors to provide accurate

well as cooling only and heat pump models, are available. ..... Art Cool. Liquid. Suction Refrigerant Length. Elevation. Single-Zone. A/C. LA091CNP. 9,800. 1/4".

French tops and swing doors plus your choice of over 750+ colors. ... charbroilers and French tops. • Gentle 130° ... OR BOTTOM OF HOOD. VENTILATION.

Electric Expansion Valve. Fresh Air Intake. N/A. Connection. Flare. Airduct Extension. N/A. Line Length, Max. (ft.) 50. Indoor Frame Extension. N/A. Lift Difference, Max. (ft.) 23. Condensate Drain Pump. N/A. Line Size. (in., O.D. Discharge) 1/4". No

1 623 313 4833 Bottom Plate Ass'y. 1 852-0-2202-90803. 2 923 077 2565 Cushion Rubber. 3 854-2-2318-13200. 3 623 310 4768 Compressor C-9RVN273H0H. 1 222-B-B808-68380. 4 923 169 5191 Eyelet Rubber Lead Wire. 1 801-2-5304-12600. 5 926 040 0223 Plate Pro