Specifications - Moen
Speci fic at ions COMMERCIAL FAUCET DESCRIPTION • Metal construction with Chrome plated or Classic Brushed Nickel finish • Copper or brass waterways • 1/2" IPS connections • Supplied with vandal resistant screws OPERATION • 4" Wrist blade style handles with hot and cold color indicators • Hot side counterclockwise (1/4) turn to open (clockwise to close) • Cold side clockwise (1/4) turn to open (counterclockwise to close) FLOW • Water usage is limited to these maximum flow rates as indicated by the corresponding product markings ° 1.2 gpm max (4.5L/min) at 60 psi CARTRIDGE • 1224 cartridge design • Nonmetallic and stainless steel material STANDARDS • Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all applicable requirements referenced therein • Certified to NSF 61/9 & 372 • Products marked with 1.2 gpm are compliant with California water efficiency regulations • Complies with California Proposition 65 and with the Federal Safe Drinking Water Act • ADA for lever handles
Two-Handle Lavatory Faucet MODEL 8800 8800CBN 8800F05 8800F03 8810 8820 8820CBN
4-5/8" (118mm)
2" (51mm)
WATERSENSE CERTIFIED x x
x x x
NOTE: Without drain assembly designed to be installed through 2 - 1" min. dia. holes 4" on center NOTE: With drain assembly designed to be installed through 3 - 1" min. dia. holes 2" on center
6-11/64" (157mm)
2" (51mm)
FINISH Chrome CBN Chrome Chrome Chrome Chrome CBN
See table above
• Warranted for five years against material or manufacturing defects
4-19/64" (109mm)
DRAIN Without Without Without Without Grid Metal Metal
CBN-Classic Brushed Nickel
WARRANTY
12-19/32" (320mm)
FLOW (gpm) 1.2 1.2 0.5 0.35 1.2 1.2 1.2
4-19/64" (109mm)
6-1/4" x 2-19/32" (159mm x 69mm) ESCUTCHEON
1-7/32" (31mm)
3-11/32" (85mm) 2-9/32" (58mm)
2-37/64" (66mm)
CRITICAL DIMENSIONS
4-11/32" (110mm)
(DO NOT SCALE)
Rev. 1/16
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158 www.moen.com
Two-Handle Lavatory Faucet MODEL 8800 8800CBN 8800F05 8800F03 8810 8820 8820CBN
4-5/8" (118mm)
2" (51mm)
WATERSENSE CERTIFIED x x
x x x
NOTE: Without drain assembly designed to be installed through 2 - 1" min. dia. holes 4" on center NOTE: With drain assembly designed to be installed through 3 - 1" min. dia. holes 2" on center
6-11/64" (157mm)
2" (51mm)
FINISH Chrome CBN Chrome Chrome Chrome Chrome CBN
See table above
• Warranted for five years against material or manufacturing defects
4-19/64" (109mm)
DRAIN Without Without Without Without Grid Metal Metal
CBN-Classic Brushed Nickel
WARRANTY
12-19/32" (320mm)
FLOW (gpm) 1.2 1.2 0.5 0.35 1.2 1.2 1.2
4-19/64" (109mm)
6-1/4" x 2-19/32" (159mm x 69mm) ESCUTCHEON
1-7/32" (31mm)
3-11/32" (85mm) 2-9/32" (58mm)
2-37/64" (66mm)
CRITICAL DIMENSIONS
4-11/32" (110mm)
(DO NOT SCALE)
Rev. 1/16
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158 www.moen.com
