Speed Pro Bead - Builder Depot
Speed Pro Bead SPABG, SPABS, SPERS, SPPSG, SPPSS, SPMB & SPARFB Application Angle Bead - SPABG & SPABS Angle Bead is used to provide a true, straight corner which protects and reinforces a 2 or 3 coat plaster or render application in its most vulnerable area. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying out times may be extended, stainless steel or uPVC should be used. Larger wings are available for unusually thick plaster / render. Available in galvanised or stainless steel.
Plaster Stop - SPPSG & SPPSS Plaster Stop bead is for use on traditional wet 2 or 3 coat plaster application, it provides a precise, clean edge to render where it butts up to other materials such as a door or window frame, reinforcing the edges of the plaster. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying out times may be extended, stainless steel or uPVC should be used. Available in galvanised or stainless steel.
SPERS
SPPSG & SPPSS
PLASTER & RENDER BEAD
External Render Stop (Bell Bead) - SPERS External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used in sheltered areas only, stainless steel for all other areas including coastal. Plaster depth 16 to 20mm, wing dimension 45mm. Available in galvanised or stainless steel.
SPABG & SPABS
Movement Bead - SPMB Movement Bead is used to overcome movement tolerances in plaster and render finishes thus minimising cracking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. Available in galvanised or stainless steel. SPMB Architrave Feature Bead - SPAFFB Architrave Feature Bead is for use on traditional wet 2 / 3 coat plaster application. It is used to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall finishes. Available with or without a return flange - (engaging or abutting). Available in galvanised only. SPARFB - Engaging * Product tables are on the following page.
1
Speed Pro Bead SPABG, SPABS, SPERS, SPPSG, SPPSS, SPMB & SPARFB Specification Galvanised steel EN 10346 DX51D Z275. Grade 1.4301 austenitic stainless steel to EN 10088-2. Installation Use appropriate fixings. Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa. Product
Code Pre Galvanised Mild Steel SPERSG2.4 SPERSG3 Stainless Steel SPERSS3
Product
Code Pre Galvanised Mild Steel SPPSG2.4X10 SPPSG2.4X13 SPPSG3X10 SPPSG3X13 SPPSG3X19 Stainless Steel SPPSS3X13 SPPSS3X16 SPPSS3X20
Product
Code Pre Galvanised Mild Steel SPMB3X12 Stainless Steel SPMBS3X16
Product
Code Galvanised Steel SPARFB3X13E SPARFB3X13A
Product
Standard Angle Bead Standard Angle Bead Wide Wing Angle Bead Wide Wing Angle Bead Standard Angle Bead
Length (m)
Size (mm)
2.4 3 2.4 3
43 x 43 43 x 43 48 x 48 48 x 48
3
50 x 50 Length (m)
External Render Stop External Render Stop
2.4 3
External Render Stop
3 Length (m)
Size (mm)
Plaster Stop Plaster Stop Plaster Stop Plaster Stop Plaster Stop
2.4 2.4 3 3 3
10 13 10 13 19
Plaster Stop Plaster Stop Plaster Stop
3 3 3
13 16 20
Length (m)
Size (mm)
Movement Bead
3
12
Movement Bead
3
16
Bead Length (m)
Size (mm)
3 3
13 13
Architrave Feature Bead - Engaging Architrave Feature Bead - Abutting
PLASTER & RENDER BEAD
Code Pre Galvanised Mild Steel SPABG2.4 SPABG3 SPPABG2.4 SPPAB3 Stainless Steel SPABS3
2
Speed Pro Bead SPABG, SPABS, SPMMG & SPSBG Thin Coat Plaster Stop - SPPSTC Thin Coat Bead is used to reinforce and protect one-coat finish of plaster on corners and reveals at its weakest points on internal walls and plasterboard. Available in galvanised only. Skim Bead (Thin Coat) - SPSBG Skim Bead for use on plasterboard or aerated blocks. Designed for standard single coat plasterwork for internal thin-coat plaster application, used to reinforce and protect plaster on corners and reveals at its weakest points. Available in galvanised only
SPSBG
Drywall Feature Bead - SPDWF Drywall Feature Bead is used to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features on thin coat plaster application only. Available with or without a return flange - (engaging or abutting). Available in galvanised only. SPMMG Plasterboard Edge Bead - SPEB Plasterboard Edge Bead is used to reinforce plasterboard edges by enclosing them in a protective steel enclosure. It is reversible therefore can be used with thin coat plaster or drylining paper tape. It is reversible therefore can be used with thin coat plaster or drylining paper tape. Available in galvanised only. * Product tables are on the following page.
DRYWALL & THIN COAT BEAD
Mini Mesh - SPMMG Galvanised Mini Mesh Beads for internal thin-coat plaster application. Mini Mesh Bead is used to reinforce and protect one-coat finish of plaster on corners at its weakest point on internal walls and plasterboard. The Mini Mesh bead has a greater area of expanded metal therefore gives a better mechanical key. Available in galvanised only.
SPPSTC
SPDWF
SPEB
3
Speed Pro Bead SPERS, SPPSG, SPPSTC & SPPSS Specification Galvanised steel EN 10346 DX51D Z275. Installation Use appropriate fixings. Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa. Product
Code Pre Galvanised Mild Steel SPSBG2.4 SPSBG3
Product
Code Pre Galvanised Mild Steel SPMMG2.4 SPMMG3
Product
Code Pre Galvanised Mild Steel SPDWFBE3 SPDWFBA3
Product
Code Pre Galvanised Mild Steel SPEB3X10 SPEB3X13 SPEB3X15
Product
Thin Coat Plaster Stop Thin Coat Plaster Stop
Length (m)
Size (mm)
2.4 3
3 3 Length (m)
Skim Bead Skim Bead
2.4 3 Length (m)
Mini Mesh Mini Mesh
2.4 3 Length (m)
Drywall Feature Bead - ENGAGING Drywall Feature Bead - ABUTTING
Plasterboard Edge Bead Plasterboard Edge Bead Plasterboard Edge Bead
3 3 Length (m)
Size (mm)
3 3 3
10 13 15
DRYWALL & THIN COAT BEAD
Code Pre Galvanised Mild Steel SPPSTCG2.4 SPPSTCG3
4
Speed Pro Bead SPPBAR, SPPB, SPPBPS & SPPBERS
uPVC Bead - SPPB
SPPBAR
SPPB
SPPBPS
Features Simple installation (with plaster dabs or stainless steel fixings). No sharp edges, and safe to handle. Easy to cut (by use of tin snips or fine tooth saw). Non corrosive. uPVC Bead is supplied as standard in white, although many colours are available upon request by supplying us with the relevant ‘RAL’ reference code.
Code
Product
Bead Length (mm)
Plaster Depth (mm)
uPVC PLASTIC BEAD
Application An alternative range of impact resistant dry lining and wet plaster beads for internal or external use. uPVC Plaster Beads are designed for use externally where galvanised beads cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary.
uPVC SPPB13/19
Angle Bead
2500
13 to 19
SPPB2/3
Angle Bead
2500
2 to 3
SPPB6/10
Angle Bead
2500
6 to 10
SPPB8/12
Angle Bead
2500
8 to 12
SPPBAR
Arch Bead
2500
2 to 3
SPPBERS6/12
External Render Stop
2500
6 to 12
SPPBERS12/22
External Render Stop
2500
12 to 22
SPPBPS6/8
Plaster Stop
2500
6 to 8
SPPBPS10/12
Plaster Stop
2500
10 to 12
SPPBPS15/17
Plaster Stop
2500
15 to 17
SPPBPS20/22
Plaster Stop
2500
20 to 22
5
Plaster Stop - SPPSG & SPPSS Plaster Stop bead is for use on traditional wet 2 or 3 coat plaster application, it provides a precise, clean edge to render where it butts up to other materials such as a door or window frame, reinforcing the edges of the plaster. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying out times may be extended, stainless steel or uPVC should be used. Available in galvanised or stainless steel.
SPERS
SPPSG & SPPSS
PLASTER & RENDER BEAD
External Render Stop (Bell Bead) - SPERS External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used in sheltered areas only, stainless steel for all other areas including coastal. Plaster depth 16 to 20mm, wing dimension 45mm. Available in galvanised or stainless steel.
SPABG & SPABS
Movement Bead - SPMB Movement Bead is used to overcome movement tolerances in plaster and render finishes thus minimising cracking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. Available in galvanised or stainless steel. SPMB Architrave Feature Bead - SPAFFB Architrave Feature Bead is for use on traditional wet 2 / 3 coat plaster application. It is used to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall finishes. Available with or without a return flange - (engaging or abutting). Available in galvanised only. SPARFB - Engaging * Product tables are on the following page.
1
Speed Pro Bead SPABG, SPABS, SPERS, SPPSG, SPPSS, SPMB & SPARFB Specification Galvanised steel EN 10346 DX51D Z275. Grade 1.4301 austenitic stainless steel to EN 10088-2. Installation Use appropriate fixings. Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa. Product
Code Pre Galvanised Mild Steel SPERSG2.4 SPERSG3 Stainless Steel SPERSS3
Product
Code Pre Galvanised Mild Steel SPPSG2.4X10 SPPSG2.4X13 SPPSG3X10 SPPSG3X13 SPPSG3X19 Stainless Steel SPPSS3X13 SPPSS3X16 SPPSS3X20
Product
Code Pre Galvanised Mild Steel SPMB3X12 Stainless Steel SPMBS3X16
Product
Code Galvanised Steel SPARFB3X13E SPARFB3X13A
Product
Standard Angle Bead Standard Angle Bead Wide Wing Angle Bead Wide Wing Angle Bead Standard Angle Bead
Length (m)
Size (mm)
2.4 3 2.4 3
43 x 43 43 x 43 48 x 48 48 x 48
3
50 x 50 Length (m)
External Render Stop External Render Stop
2.4 3
External Render Stop
3 Length (m)
Size (mm)
Plaster Stop Plaster Stop Plaster Stop Plaster Stop Plaster Stop
2.4 2.4 3 3 3
10 13 10 13 19
Plaster Stop Plaster Stop Plaster Stop
3 3 3
13 16 20
Length (m)
Size (mm)
Movement Bead
3
12
Movement Bead
3
16
Bead Length (m)
Size (mm)
3 3
13 13
Architrave Feature Bead - Engaging Architrave Feature Bead - Abutting
PLASTER & RENDER BEAD
Code Pre Galvanised Mild Steel SPABG2.4 SPABG3 SPPABG2.4 SPPAB3 Stainless Steel SPABS3
2
Speed Pro Bead SPABG, SPABS, SPMMG & SPSBG Thin Coat Plaster Stop - SPPSTC Thin Coat Bead is used to reinforce and protect one-coat finish of plaster on corners and reveals at its weakest points on internal walls and plasterboard. Available in galvanised only. Skim Bead (Thin Coat) - SPSBG Skim Bead for use on plasterboard or aerated blocks. Designed for standard single coat plasterwork for internal thin-coat plaster application, used to reinforce and protect plaster on corners and reveals at its weakest points. Available in galvanised only
SPSBG
Drywall Feature Bead - SPDWF Drywall Feature Bead is used to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features on thin coat plaster application only. Available with or without a return flange - (engaging or abutting). Available in galvanised only. SPMMG Plasterboard Edge Bead - SPEB Plasterboard Edge Bead is used to reinforce plasterboard edges by enclosing them in a protective steel enclosure. It is reversible therefore can be used with thin coat plaster or drylining paper tape. It is reversible therefore can be used with thin coat plaster or drylining paper tape. Available in galvanised only. * Product tables are on the following page.
DRYWALL & THIN COAT BEAD
Mini Mesh - SPMMG Galvanised Mini Mesh Beads for internal thin-coat plaster application. Mini Mesh Bead is used to reinforce and protect one-coat finish of plaster on corners at its weakest point on internal walls and plasterboard. The Mini Mesh bead has a greater area of expanded metal therefore gives a better mechanical key. Available in galvanised only.
SPPSTC
SPDWF
SPEB
3
Speed Pro Bead SPERS, SPPSG, SPPSTC & SPPSS Specification Galvanised steel EN 10346 DX51D Z275. Installation Use appropriate fixings. Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa. Product
Code Pre Galvanised Mild Steel SPSBG2.4 SPSBG3
Product
Code Pre Galvanised Mild Steel SPMMG2.4 SPMMG3
Product
Code Pre Galvanised Mild Steel SPDWFBE3 SPDWFBA3
Product
Code Pre Galvanised Mild Steel SPEB3X10 SPEB3X13 SPEB3X15
Product
Thin Coat Plaster Stop Thin Coat Plaster Stop
Length (m)
Size (mm)
2.4 3
3 3 Length (m)
Skim Bead Skim Bead
2.4 3 Length (m)
Mini Mesh Mini Mesh
2.4 3 Length (m)
Drywall Feature Bead - ENGAGING Drywall Feature Bead - ABUTTING
Plasterboard Edge Bead Plasterboard Edge Bead Plasterboard Edge Bead
3 3 Length (m)
Size (mm)
3 3 3
10 13 15
DRYWALL & THIN COAT BEAD
Code Pre Galvanised Mild Steel SPPSTCG2.4 SPPSTCG3
4
Speed Pro Bead SPPBAR, SPPB, SPPBPS & SPPBERS
uPVC Bead - SPPB
SPPBAR
SPPB
SPPBPS
Features Simple installation (with plaster dabs or stainless steel fixings). No sharp edges, and safe to handle. Easy to cut (by use of tin snips or fine tooth saw). Non corrosive. uPVC Bead is supplied as standard in white, although many colours are available upon request by supplying us with the relevant ‘RAL’ reference code.
Code
Product
Bead Length (mm)
Plaster Depth (mm)
uPVC PLASTIC BEAD
Application An alternative range of impact resistant dry lining and wet plaster beads for internal or external use. uPVC Plaster Beads are designed for use externally where galvanised beads cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary.
uPVC SPPB13/19
Angle Bead
2500
13 to 19
SPPB2/3
Angle Bead
2500
2 to 3
SPPB6/10
Angle Bead
2500
6 to 10
SPPB8/12
Angle Bead
2500
8 to 12
SPPBAR
Arch Bead
2500
2 to 3
SPPBERS6/12
External Render Stop
2500
6 to 12
SPPBERS12/22
External Render Stop
2500
12 to 22
SPPBPS6/8
Plaster Stop
2500
6 to 8
SPPBPS10/12
Plaster Stop
2500
10 to 12
SPPBPS15/17
Plaster Stop
2500
15 to 17
SPPBPS20/22
Plaster Stop
2500
20 to 22
5
