Speed Switch

Speed Switch

Speed Switch How to replace a damaged or jammed speed switch.

Written By: Dalton Johnson

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Speed Switch

INTRODUCTION The purpose of this guide to provide simple and straight-forward instruction on replacing a damaged or jammed speed switch.

TOOLS: Phillips #2 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Speed Switch

Step 1 — Switch





Use a phillips head screwdriver to unscrew the following 8 screws: 

One 24mm Phillips screw



Six 16mm Phillips screws



One 9mm Phillips screw

Turn the drill to the other side and unscrew the marked screw using the same phillips head screwdriver. Place it with the other removed screws.

 Keep all screws organized on a magnetic mat after removal.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Speed Switch

Step 2



Carefully remove the plastic drill casing by pulling it apart.

 When separating the drill casing, the black plastic speed switch covering will be removed from the drill automatically.

Step 3



Gently remove the orange plastic speed switch from the drill. It is located right above the motor.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-08-25 08:44:55 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4