Spinner Pattern - The Quilting Gypsy
July Spinner
www.phillipsfiberart.com
Yardage Chart Fabric A - F (six fabrics) G Backing Batting Binding
Suggested Yardage 4" each 1/4 yd 17" 5/8 yd 21" square 20" square 3/8 yd
Exact amount
Cutting Chart Fabric A - F (six fabrics) G • Sew six strip sets, each with a 2 3/4" G plus a spoke fabric (A,B,C,D,E,F). • Mark the angled line on the 12 degree wedge tool. (See following page for the
Strips 1 each 6
Strip size each 4" x width 2 3/4" x width
2 3/4" G 4" A
diagram.)
• An accurate wedge cut is important. To keep the wedge from slipping, place a tube of wide packaging tape onto the back of the wedge toolsticky side out. • Cut five wedges from each strip set. • • • • • •
Cut 5 wedges
Repeat for the other strip sets, cutting 5 wedges each.
Pin the wedges together matching tips and wide ends. Be careful not to stretch the bias edges. Sew two wedges together, matching both the tip and wide ends. Sew the 30 wedges together to form a circle. Stabilize the center opening by ironing a scrap of freezer paper to the back side. Using the circle on the next page, create a freezer paper applique. Applique the circle over the center opening.
© Cheryl Phillips 2012
This pattern is NOT for resale
July Spinner
www.phillipsfiberart.com
Trace the angled line onto the 12 degree wedge tool using a removable marker.
12 Degree Wedge © Cheryl Phillips 2012
This pattern is NOT for resale
www.phillipsfiberart.com
Yardage Chart Fabric A - F (six fabrics) G Backing Batting Binding
Suggested Yardage 4" each 1/4 yd 17" 5/8 yd 21" square 20" square 3/8 yd
Exact amount
Cutting Chart Fabric A - F (six fabrics) G • Sew six strip sets, each with a 2 3/4" G plus a spoke fabric (A,B,C,D,E,F). • Mark the angled line on the 12 degree wedge tool. (See following page for the
Strips 1 each 6
Strip size each 4" x width 2 3/4" x width
2 3/4" G 4" A
diagram.)
• An accurate wedge cut is important. To keep the wedge from slipping, place a tube of wide packaging tape onto the back of the wedge toolsticky side out. • Cut five wedges from each strip set. • • • • • •
Cut 5 wedges
Repeat for the other strip sets, cutting 5 wedges each.
Pin the wedges together matching tips and wide ends. Be careful not to stretch the bias edges. Sew two wedges together, matching both the tip and wide ends. Sew the 30 wedges together to form a circle. Stabilize the center opening by ironing a scrap of freezer paper to the back side. Using the circle on the next page, create a freezer paper applique. Applique the circle over the center opening.
© Cheryl Phillips 2012
This pattern is NOT for resale
July Spinner
www.phillipsfiberart.com
Trace the angled line onto the 12 degree wedge tool using a removable marker.
12 Degree Wedge © Cheryl Phillips 2012
This pattern is NOT for resale
