SPP⢠Coaxial Cables SPP⢠Coaxial Cables - Talley!
SPP-LLPL-2_Layout 1 5/16/2014 9:55 AM Page 1
SPP™ Coaxial Cables ISO 9001 Certified
In-Building, Low Loss, Low PIM, Plenum Rated Cable Assemblies • Excellent PIM(typically -160 dBc) for optimum system performance • UL910 plenum rated satisfying building code requirements • Super flexible for ease of installation • Corrugated copper outer conductor providing greater than 100dB shielding • Wideband low VSWR typically 1.15:1 from 50 to 6000MHz covering all in-building technologies • Durable FEP outer jacket is suitable for outdoor use
SPP2-50, SPP-375, SPP-500 50 Ohm low loss low PIM coaxial cable assemblies • Standard assemblies in 1, 2 and 3 meter lengths with popular connector combinations • 100% tested for static and dynamic PIM, VSWR and Insertion Loss • Custom length assemblies are available • 10 year Times Microwave warranty
SPP250NMNM1.0M Typical VSWR
Dynamic PIM Test Results
SPP-LLPL-2_Layout 1 5/16/2014 9:55 AM Page 2
SPP™ Coaxial Cables Physical Specifications Jacket Inner Conductor
SPP-250
Cable Stock Codes: Jacket: Extruded FEP; OD: in(mm) Outer Conductor: Corrugated Copper Tube; OD: in(mm) Dielectric: LD PTFE OD: in(mm) Center Conductor: Solid BCCAI; OD: in(mm) Bend Radius: in(mm) Bending Moment: ft-lbs (N-m) Tensile Strength: lb (kg) Flat Plate Crush Strength: lb/in (kg/mm) Weight: lbs/1000 ft (kg/km)
15314 0.280 0.250 0.190 0.068 1.25 0.8 150 100 66
(7.1) (6.3) (4.8) (1.7) (32) (1.0) (68.2) (1.8) (78)
SPP-375 15318 0.402 (10.2) 0.380 (9.6) 0.285 (7.1) 0.100 (2.7) 1.38 (35) 1.7 (2.0) 175 (79.5) 100 (1.8) 115 (127)
SPP-500 0.500 0.472 0.370 0.136 1.50 2.0 210 110 200
15319 (13.4) (12.1) (9.4) (3.5) (38) (2.4) (95.5) (2.0) (167)
Environmental Specifications Outer Conductor
Dielectric
Cable Construction Inner Conductor: Solid bare copper
Dielectric: Tape wrapped low density PTFE Outer Conductor: Seam welded corrugated copper tube Jacket: Extruded FEP
Installation Temperature Range °C/°F Storage Temperature Range °C/°F Operating Temperature Range °C/°F
-55/+200 -55/+200 -55/+200
(-67/+392º) -55/+200 (-67/+392º) -55/+200 (-67/+392º) (-67/+392º) -55/+200 (-67/+392º) -55/+200 (-67/+392º) (-67/+392º) -55/+200 (-67/+392º) -55/+200 (-67/+392º)
Electrical Specifications Velocity of Propagation: % Impedance: Ohms Capacitance: pF/ft (pF/m) Inductance: µH/ft (uH/m) Shielding Effectiveness: dB Passive Intermodulation (PIM): dBc Center Conductor DC Resistance: Ohms/1000 ft/(km) Shield DC Resistance: Ohms/1000 ft (km) Attenuation & Average Power @ MHz 450 900 2000 5800
Connectors (solder body) N Male Straight N Male Right Angle N Female
76% 76% 76% 50 Ohms 50 Ohms 50 Ohms 27.0 (8.2) 27.5 (8.4) 29.0 (8.8) 0.067 (0.22) 0.067 (0.22) 0.069 (0.23) >100 >100 >100
SPP™ Coaxial Cables ISO 9001 Certified
In-Building, Low Loss, Low PIM, Plenum Rated Cable Assemblies • Excellent PIM(typically -160 dBc) for optimum system performance • UL910 plenum rated satisfying building code requirements • Super flexible for ease of installation • Corrugated copper outer conductor providing greater than 100dB shielding • Wideband low VSWR typically 1.15:1 from 50 to 6000MHz covering all in-building technologies • Durable FEP outer jacket is suitable for outdoor use
SPP2-50, SPP-375, SPP-500 50 Ohm low loss low PIM coaxial cable assemblies • Standard assemblies in 1, 2 and 3 meter lengths with popular connector combinations • 100% tested for static and dynamic PIM, VSWR and Insertion Loss • Custom length assemblies are available • 10 year Times Microwave warranty
SPP250NMNM1.0M Typical VSWR
Dynamic PIM Test Results
SPP-LLPL-2_Layout 1 5/16/2014 9:55 AM Page 2
SPP™ Coaxial Cables Physical Specifications Jacket Inner Conductor
SPP-250
Cable Stock Codes: Jacket: Extruded FEP; OD: in(mm) Outer Conductor: Corrugated Copper Tube; OD: in(mm) Dielectric: LD PTFE OD: in(mm) Center Conductor: Solid BCCAI; OD: in(mm) Bend Radius: in(mm) Bending Moment: ft-lbs (N-m) Tensile Strength: lb (kg) Flat Plate Crush Strength: lb/in (kg/mm) Weight: lbs/1000 ft (kg/km)
15314 0.280 0.250 0.190 0.068 1.25 0.8 150 100 66
(7.1) (6.3) (4.8) (1.7) (32) (1.0) (68.2) (1.8) (78)
SPP-375 15318 0.402 (10.2) 0.380 (9.6) 0.285 (7.1) 0.100 (2.7) 1.38 (35) 1.7 (2.0) 175 (79.5) 100 (1.8) 115 (127)
SPP-500 0.500 0.472 0.370 0.136 1.50 2.0 210 110 200
15319 (13.4) (12.1) (9.4) (3.5) (38) (2.4) (95.5) (2.0) (167)
Environmental Specifications Outer Conductor
Dielectric
Cable Construction Inner Conductor: Solid bare copper
Dielectric: Tape wrapped low density PTFE Outer Conductor: Seam welded corrugated copper tube Jacket: Extruded FEP
Installation Temperature Range °C/°F Storage Temperature Range °C/°F Operating Temperature Range °C/°F
-55/+200 -55/+200 -55/+200
(-67/+392º) -55/+200 (-67/+392º) -55/+200 (-67/+392º) (-67/+392º) -55/+200 (-67/+392º) -55/+200 (-67/+392º) (-67/+392º) -55/+200 (-67/+392º) -55/+200 (-67/+392º)
Electrical Specifications Velocity of Propagation: % Impedance: Ohms Capacitance: pF/ft (pF/m) Inductance: µH/ft (uH/m) Shielding Effectiveness: dB Passive Intermodulation (PIM): dBc Center Conductor DC Resistance: Ohms/1000 ft/(km) Shield DC Resistance: Ohms/1000 ft (km) Attenuation & Average Power @ MHz 450 900 2000 5800
Connectors (solder body) N Male Straight N Male Right Angle N Female
76% 76% 76% 50 Ohms 50 Ohms 50 Ohms 27.0 (8.2) 27.5 (8.4) 29.0 (8.8) 0.067 (0.22) 0.067 (0.22) 0.069 (0.23) >100 >100 >100
