Spreader Attachment
Spreader Attachment
Bobcat Spreader Attachment ®
Specifications Spreader
SP5
SP12
Operating Weight (empty)
191 lb.
325 lb.
Height
32.5 in.
44.7 in.
Width
38.5 in.
48.5 in.
The Bobcat spreader attachment spreads sand and salt to maintain parking lots, sidewalks, driveways and alleys. Its corrosion-free, all-poly hopper stands up to sand and salt combinations.
Length
30.75 in.
78.5 in.
Model SP5
Hopper Capacity
5.75 cu. ft.
13.5 cu. ft.
Spreading Pattern
4 to 40 ft.
5 to 40 ft.
• Can be used to spread most dry, free-flowing granular material—such as seed and fertilizer for lawn care
Speed Control
Variable speed dial control
Motor
12-volt DC direct drive
Spinner Wheel Diameter
10 in.
• Load the hopper from the back of a dump truck to reduce manual load time • Mounts on a loader or pickup truck for carrier versatility • Variable-speed 12-volt DC motor varies spreading pattern from 4 to 40 feet
12 in.
• Regulate the spinner wheel rpm from the operator’s seat with a cab-mounted rotary dial
Model SP5 Features and Optional Equipment
• Fitted tarp keeps spreading materials dry • Optional equipment • Loader or truck mounting kit • Adjustable deflector • Gate assembly kit • Vibrator kit Model SP12
Gate Assembly Kit
The Gate Assembly Kit has a manual control located on the side of the spreader hopper. Recommended when applying fine granular materials such as seed and fertilizer. The gate assembly controls and meters material flow for a more precise rate.
• Clears snow and spreads salt/sand in one pass with the use of a snow removal attachment such as a snowblower, snow blade or angle broom. Remove snow and spread salt/sand with less equipment, fewer operators and fewer passes
SP5 Spreader Spinner Control
The control box that includes the on/off switch for the variable speed motor and spinner rpm rotary dial switch is mounted in the cab and controlled from the operator's seat.
• Dash-mounted controller includes a master on/off switch, an on/off switch for the vibrator and two variable-speed dials for independent adjustment of the auger and spinner speed
Model SP12 Features
• Variable-speed spinner spreads material 5 to 40 feet • Filters large chunks of sand or salt with large mesh screen at the top of the hopper • A three-stage baffle covers the auger and allows for adjustment of material flow required due to material granularity • Fitted tarp keeps spreading materials dry
Vibrator Kit
Standard on SP12 and an option for SP5. Reduces bridging of material for constant flow.
SP12 Spreader Control
Complete control from inside the cab! Independently manage the vibrator, auger speed, and spinner speed.
NOTE - Where applicable, dimensions are in accordance with Society of Automotive Engineers (SAE) and ISO standards. Specifications and design are subject to change without notice. Pictures of Bobcat units may show other than standard equipment. All dimensions are given for loader equipped with standard tires. All dimensions are shown in inches. Respective metric dimensions are enclosed by parentheses. Bobcat Company complies with the requirements of ISO 9001 as registered with BSI.
The Bobcat Attachments Advantage: Bobcat attachments are engineered and manufactured to fit Bobcat loaders for optimum job performance, dependability and durability.
Spreader with front-mounted attachment can clear snow and spread salt/sand in one pass.
Bobcat Company
P.O. Box 6000 • West Fargo, ND 58078 www.bobcat.com B-1744 (3/08)
Printed in U.S.A.
Kn-10M-308-#12474-F
Bobcat Spreader Attachment fits these carrier models: Skid-Steer Loaders: S130 S150 S160 S175 S185 S205 S220 S250 S300 Compact Track Loaders: T140 T180 T190 T250 T300 T320 All-Wheel Steer Loaders: A300 Utility Work Machine: 5600
Bobcat Spreader Attachment ®
Specifications Spreader
SP5
SP12
Operating Weight (empty)
191 lb.
325 lb.
Height
32.5 in.
44.7 in.
Width
38.5 in.
48.5 in.
The Bobcat spreader attachment spreads sand and salt to maintain parking lots, sidewalks, driveways and alleys. Its corrosion-free, all-poly hopper stands up to sand and salt combinations.
Length
30.75 in.
78.5 in.
Model SP5
Hopper Capacity
5.75 cu. ft.
13.5 cu. ft.
Spreading Pattern
4 to 40 ft.
5 to 40 ft.
• Can be used to spread most dry, free-flowing granular material—such as seed and fertilizer for lawn care
Speed Control
Variable speed dial control
Motor
12-volt DC direct drive
Spinner Wheel Diameter
10 in.
• Load the hopper from the back of a dump truck to reduce manual load time • Mounts on a loader or pickup truck for carrier versatility • Variable-speed 12-volt DC motor varies spreading pattern from 4 to 40 feet
12 in.
• Regulate the spinner wheel rpm from the operator’s seat with a cab-mounted rotary dial
Model SP5 Features and Optional Equipment
• Fitted tarp keeps spreading materials dry • Optional equipment • Loader or truck mounting kit • Adjustable deflector • Gate assembly kit • Vibrator kit Model SP12
Gate Assembly Kit
The Gate Assembly Kit has a manual control located on the side of the spreader hopper. Recommended when applying fine granular materials such as seed and fertilizer. The gate assembly controls and meters material flow for a more precise rate.
• Clears snow and spreads salt/sand in one pass with the use of a snow removal attachment such as a snowblower, snow blade or angle broom. Remove snow and spread salt/sand with less equipment, fewer operators and fewer passes
SP5 Spreader Spinner Control
The control box that includes the on/off switch for the variable speed motor and spinner rpm rotary dial switch is mounted in the cab and controlled from the operator's seat.
• Dash-mounted controller includes a master on/off switch, an on/off switch for the vibrator and two variable-speed dials for independent adjustment of the auger and spinner speed
Model SP12 Features
• Variable-speed spinner spreads material 5 to 40 feet • Filters large chunks of sand or salt with large mesh screen at the top of the hopper • A three-stage baffle covers the auger and allows for adjustment of material flow required due to material granularity • Fitted tarp keeps spreading materials dry
Vibrator Kit
Standard on SP12 and an option for SP5. Reduces bridging of material for constant flow.
SP12 Spreader Control
Complete control from inside the cab! Independently manage the vibrator, auger speed, and spinner speed.
NOTE - Where applicable, dimensions are in accordance with Society of Automotive Engineers (SAE) and ISO standards. Specifications and design are subject to change without notice. Pictures of Bobcat units may show other than standard equipment. All dimensions are given for loader equipped with standard tires. All dimensions are shown in inches. Respective metric dimensions are enclosed by parentheses. Bobcat Company complies with the requirements of ISO 9001 as registered with BSI.
The Bobcat Attachments Advantage: Bobcat attachments are engineered and manufactured to fit Bobcat loaders for optimum job performance, dependability and durability.
Spreader with front-mounted attachment can clear snow and spread salt/sand in one pass.
Bobcat Company
P.O. Box 6000 • West Fargo, ND 58078 www.bobcat.com B-1744 (3/08)
Printed in U.S.A.
Kn-10M-308-#12474-F
Bobcat Spreader Attachment fits these carrier models: Skid-Steer Loaders: S130 S150 S160 S175 S185 S205 S220 S250 S300 Compact Track Loaders: T140 T180 T190 T250 T300 T320 All-Wheel Steer Loaders: A300 Utility Work Machine: 5600
