Sprout channel cubby outer trim Replacement

Sprout channel cubby outer trim Replacement

Sprout channel cubby outer trim Replacement How to take apart the outer trim of the device for replacement.

Written By: jasen biggins

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Sprout channel cubby outer trim Replacement

INTRODUCTION This is a fairly simple guide the only thing that is needed is the plastic spudger. The trim usual gets damaged from drops and will need to be replaced accordingly.

TOOLS: iFixit Opening Tools (1) Metal Spudger (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Sprout channel cubby outer trim Replacement

Step 1 — Front Half



Begin by prying apart your device and pushing in tabs. It is easiest to start on the corners.



There are 16 tabs in total.

Step 2 — outer trim



There are 19 tabs that need to be pushed out of the inner trim. The mettle spudger works great here.

 Do not push to hard on the tabs or they will break © iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Sprout channel cubby outer trim Replacement

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-21 12:26:04 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4