SSS Poles Quick Ship - Hubbell Outdoor Lighting
Square Straight Steel Poles
(pole shaft prepared with #2 hole pattern on all four sides for Cimarron, Raven and MSV luminaires and includes three covers for any unused sides)
QS
10-Day Quick Ship Ordering Guide 10
Order Limit Per Fixture Selection: 25
CROSS SECTION
1 2
3
OPTIONS
LUMINAIRE MOUNTING TYPE1
SSS-S-16-40-A SSS-S-20-40-A SSS-S-25-40-A SSS-S-30-40-B
1 2 2L 3T 4 TA TB TC TR1
GFI 20 Amp GFCI
receptacle and cover
Single arm mount Two fixtures at 180° Two fixtures at 90° Three fixtures at 90° Four fixtures at 90° Tenon (2 3/8” OD)
VM2 2nd mode vibration
3.5” pattern
POLE TOP
3.875 .875 3.5
Removable Tenon (2.375 x 4.25)
DRILL PATTERNS: Compatible for Spaulding luminaires Specify option location using logicfound in spec sheet; The location OT No drilling (includes pole cap) of all options must start a minimum of six inches above the hand hole and be located one foot apart from one another; Consult factory for any exceptions Removable tenon used in conjunction with side arm mounting, specify desired arm configuration first followed by “TR” notation Example: SSS-S-25-40-A-1-S2-TR-DB
LAB Less anchor bolts
S2 Spaulding #2 2 bolt
Tenon (2 7/8” OD) Tenon (3.5” OD)
damper
DRILL PATTERN
Ø .875 HOLE
FINISH
Ø .563 3 HOLES
#2 DRILL PATTERN
BL DB GR PS WH
Black Dark Bronze Gray Platinum Silver White
ORDERING INFORMATION Catalog Number SSS-S-16-40-A-XX-XX SSS-S-20-40-A-XX-XX SSS-S-25-40-A-XX-XX SSS-S-30-40-B-XX-XX 1 Note
Height Feet
Meters
Nominal Shaft Dimensions
16 20 25 30
4.9 6.1 7.6 9.1
4” square 4” square 4” square 4” square
Wall Thickness
Bolt Circle (suggested)
Bolt Circle (range)
Bolt Square (range)
Base Plate Square
Anchor bolt size
Bolt Projection
Pole weight
0.125” 0.125” 0.125” .188”
9” 9” 9” 11”
8” - 10” 8” - 10” 8” - 10” 10” - 12”
5.66” - 7.07” 5.66” - 7.07” 5.66” - 7.07” 7.07” - 8.48”
9” 9” 9” 10.50”
3/4” x 30” x 3” 3/4” x 30” x 3” 3/4” x 30” x 3” 3/4” x 30” x 3”
3.5 3.5 3.5 3.5
116 142 175 304
Allowable EPA with 1.3 gust factor. To determine max. pole loading weight, multiply allowable EPA by 30 lbs. Published allowable EPA values based upon calculations of Spaulding Lighting. Allowable EPA values for projects requiring AASHTO methodology are available upon request. Factory supplied template must be used when setting anchor bolts. Hubbell Lighting will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template and anchor bolts.
(pole shaft prepared with #2 hole pattern on all four sides for Cimarron, Raven and MSV luminaires and includes three covers for any unused sides)
QS
10-Day Quick Ship Ordering Guide 10
Order Limit Per Fixture Selection: 25
CROSS SECTION
1 2
3
OPTIONS
LUMINAIRE MOUNTING TYPE1
SSS-S-16-40-A SSS-S-20-40-A SSS-S-25-40-A SSS-S-30-40-B
1 2 2L 3T 4 TA TB TC TR1
GFI 20 Amp GFCI
receptacle and cover
Single arm mount Two fixtures at 180° Two fixtures at 90° Three fixtures at 90° Four fixtures at 90° Tenon (2 3/8” OD)
VM2 2nd mode vibration
3.5” pattern
POLE TOP
3.875 .875 3.5
Removable Tenon (2.375 x 4.25)
DRILL PATTERNS: Compatible for Spaulding luminaires Specify option location using logicfound in spec sheet; The location OT No drilling (includes pole cap) of all options must start a minimum of six inches above the hand hole and be located one foot apart from one another; Consult factory for any exceptions Removable tenon used in conjunction with side arm mounting, specify desired arm configuration first followed by “TR” notation Example: SSS-S-25-40-A-1-S2-TR-DB
LAB Less anchor bolts
S2 Spaulding #2 2 bolt
Tenon (2 7/8” OD) Tenon (3.5” OD)
damper
DRILL PATTERN
Ø .875 HOLE
FINISH
Ø .563 3 HOLES
#2 DRILL PATTERN
BL DB GR PS WH
Black Dark Bronze Gray Platinum Silver White
ORDERING INFORMATION Catalog Number SSS-S-16-40-A-XX-XX SSS-S-20-40-A-XX-XX SSS-S-25-40-A-XX-XX SSS-S-30-40-B-XX-XX 1 Note
Height Feet
Meters
Nominal Shaft Dimensions
16 20 25 30
4.9 6.1 7.6 9.1
4” square 4” square 4” square 4” square
Wall Thickness
Bolt Circle (suggested)
Bolt Circle (range)
Bolt Square (range)
Base Plate Square
Anchor bolt size
Bolt Projection
Pole weight
0.125” 0.125” 0.125” .188”
9” 9” 9” 11”
8” - 10” 8” - 10” 8” - 10” 10” - 12”
5.66” - 7.07” 5.66” - 7.07” 5.66” - 7.07” 7.07” - 8.48”
9” 9” 9” 10.50”
3/4” x 30” x 3” 3/4” x 30” x 3” 3/4” x 30” x 3” 3/4” x 30” x 3”
3.5 3.5 3.5 3.5
116 142 175 304
Allowable EPA with 1.3 gust factor. To determine max. pole loading weight, multiply allowable EPA by 30 lbs. Published allowable EPA values based upon calculations of Spaulding Lighting. Allowable EPA values for projects requiring AASHTO methodology are available upon request. Factory supplied template must be used when setting anchor bolts. Hubbell Lighting will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template and anchor bolts.
