ST4448N Salad Top - Restaurant Supply
Item _____________________________________
ST4448N Salad Top
Front-Breathing Self-Contained Salad Top Refrigerated Bases Models •
ST4448N-8
Two section with doors, eight pan capacity
•
STD4448N-8
Two section with drawers, eight pan capacity
Quantity _________________________________ CSI Section 11400 Approved ________________________________ Date _____________________________________
Standard Features
ST4448N-8
Specifications
Exterior top is one-piece 22-gauge stainless steel with integral 2.12” (5.4cm) square nosing on the front. The backsplash is full width and 4” (10cm) tall. Top of drawer unit has openings to accept eight 1/6-size 4” (10cm) deep plastic pans. Top of door unit has openings to accept eight 1/6-size 4” or 6” (10cm or 15cm) deep plastic pans. Adapter bars and 1/6 pans are supplied by Delfield. Lid is constructed of 20-gauge stainless steel. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 2.5” (6.4cm) at 86°F ambient room temperature, meeting NSF 7 requirements. One 48” x 10” x .5” (121.9cm x 25.4cm x 1.3cm) polyethylene cutting board treated with antimicrobial agent is mounted on the top at the front edge. Dual level pan brackets allow the pans to be lowered an additional inch in the unit without tools to provide additional pan temperature holding performance. Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel. Interior sides are thermoformed ABS plastic with integral shelf supports. Base is fully insulated with high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane. Refrigeration system uses HFC-404A refrigerant. Compressor
980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
• Patented air screen ensures product stays cold without drying it out • All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up • Durable, rugged stainless steel sides, top and front • Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty • Dual level pan brackets allow the pans to be lowered an additional inch in the unit without tools to provide additional pan temperature holding performance • Delfield supplies 1/6 size pans and positive placement adapter bars for top opening • Salad top refrigerators are standard with 10” wide, dishwasher safe polyethylene cutting board treated with antimicrobial agent • “D” prefix models feature Delfield’s new drawer system. Drawers are backed by a 10-year warranty on the track assembly • Environmentally friendly R404A refrigerant • High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global
• • • • • • •
Warming Potential) polyurethane keeps energy costs low Black recessed quick grip handle Standard on 5” casters for easy cleaning and installation 6’ cord and plug supplied One epoxy coated wire shelf standard, installed per door section ACT solid state electronic control "ST" models have a 4" stainless steel backsplash Three year parts and labor warranty and an additional two year compressor parts warranty
Options & Accessories • • • • • • • • •
Flat lift off cover 18” wide single tier overshelf Stainless steel finish on back Plastic laminate on front Additional wire shelves 3” casters, 3.75” ride height Door lock Exterior thermometer 220V/50 Hertz electrical system*
* Inclusion of this option will alter electrical specifications of the unit
is 1/5 H.P., with condenser coil and hot gas condensate evaporator mounted on rear of the cabinet. Evaporator coil is located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C). ACT control: ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions. Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 6’ (1.8m) long electrical cord and NEMA 5-15P plug. Casters: Equipment is mounted on 5” (13cm) diameter plate casters with front two locking. Equipment clearance above the floor is 2.5” (6cm). Doors have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet of door models has one adjustable epoxy-coated wire shelf. Drawers have a 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Each top drawer holds one full size 12” x 20 (30.5cm x 50.8cm) pan and three 1/9 size pans 4”- 6” (10.2cm - 15.2cm) deep. Each bottom drawer holds one 12” x 20 (30.5cm x 50.8cm) pan and three 1/9 size pans 4” (10.1cm) deep. Pans are supplied by others.
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619
www.delfield.com
ST4448N Salad Top: Front-Breathing Self-Contained Salad Top Refrigerated Bases
Project ___________________________________
13.63 1.39
28.37
12.96
12.36
22.66" [57.56]
48.13
NOSE OF UNIT TO EDGE OF DOOR
48.13 28.63
2.54
21.63
22.66" [57.56]
1.39
NOSE OF UNIT TO EDGE OF DOOR
] [50.65 ON 19.94"TH DIMENSI .13] WID SION DOOR 43.75" [111 DIMEN OR RI INTE
Front-Breathing Self-Contained Salad Top Refrigerated Bases
13.63
2.75
1.94 [4.93]
6.14 [15.61]
13.63
12.96
] " [50.65 ION 19.94TH DIMENS WID 1.13] DOOR 43.75" [11MENSION R DI INTERIO
16.96
ISOMETRIC VIEW
Pan Cutout Configuration ISOMETRIC VIEW
27.13
31.50" [80.01]
48.13" [122.30]
21.63
16.37 [41.57]
NOSE OF UNIT 29.55" [75.1] NOSE OF UNIT 19.60" [49.77] 19.60" [49.77] TO EDGE OF DRAWER TO EDGE OF DRAWER
9.72 [24.69]
1.19 [3.02] 9.72“ [25cm]
31.50" [80.01]
48.13" [122.30]
1.94 [4.93]
1.00” [2.5cm]
4.00" [10.20]
16.37 [41.57]
6.14 [15.61]
29.55" [75.1]
26.86" [68.22]
36.00" [91.40]
20.75" [52.70]
21.94" [55.73] 20.75" [52.70]
26.86" ALT. [68.22] SHELF
33.59" [85.31] 33.59" [85.31]
21.94" [55.73]
17.35" [44.08]
23.79" [60.43]
ALT. SHELF
12.98" [33.00]
] " [50.65 ION 19.94TH DIMENS WID 1.13] DOOR 43.75" [11MENSION R DI INTERIO
SHELF
17.35" [44.08]
7.53" [19.10] 12.98" [33.00] 6.11" [15.52]
SHELF
7.53" [19.10] 6.11" [15.52]
FRONT
2.50" [6.30]
2.50" [6.30]
ISOMETRIC VIEW ISOMETRIC VIEW RIGHT INTERIOR VIEW VIEW RIGHT INTERIOR
ST4448N-8 Right Side View
ST4448N-8 Elevation View
FRONT VIEW FRONT VIEW
ST4448N-8 ISO View
ISOMETRIC VIEW
31.50" 31.50" [80.01][80.01]
[122.30] 48.13"48.13" [122.30]
29.55" 29.55" [75.1] [75.1]
1.94 [4.93] 1.94 [4.93]
16.37 16.37 [41.57][41.57]
9.72 [24.69] 9.72 [24.69]
48.13" [122.30]
1.19 [3.02] 1.19 [3.02]
31.50" [80.01] 29.55" [75.1]
9.72“ 9.72“
4.00" [10.20] 4.00" [10.20]
1.19 [3.02]
[25cm][25cm] 16.37 [41.57]
1.941.00” [4.93]1.00”
6.14 [15.61] 6.14 [15.61]
9.72 [24.69]
6.06” 6.06” [15cm][15cm]
[2.5cm] [2.5cm]
6.14 [15.61]
9.72“ 19.60" [25cm][49.77]
1.00” [2.5cm]
4.00" [10.20]
6.06” [15cm]
4.00" ORDEEP 6.00"PANS DEEPON PANS 4.00" OR 6.00" TOPON TOP 4.00"PANS DEEPONLY PANSON ONLY ON BOTTOM 4.00" DEEP BOTTOM
ST4448N Salad Top
NOSE OF UNIT TO EDGE OF DOOR
6.06” [15cm]
23.79" [60.43]
36.00" [91.40]
22.66" [57.56]
9.72“ [25cm]
1.00” [2.5cm]
4.00" [10.20]
12.96
6.06” [15cm]
1.19 [3.02] 9.72 [24.69]
26.86" [68.22]
36.00"36.00" [91.40][91.40]
20.75" [52.70]
21.94" [55.73]
23.79" [60.43]
36.00" [91.40]
33.59"33.59" [85.31][85.31]
NOSE OF UNIT TO EDGE OF DRAWER
ALT. SHELF
33.59" [85.31]
17.35" [44.08] 12.98" [33.00]
SHELF
7.53" [19.10] 6.11" [15.52]
2.50" [6.30] 2.50" [6.30]
2.50" [6.30]
FRONT RIGHT VIEW RIGHT VIEWVIEW STD4448N-8 Right Side View
STD4448N-8 Elevation View FRONT VIEW FRONT VIEW
RIGHT INTERIOR VIEW ISOMETRIC VIEW STD4448N-8 ISO View
31.50" [80.01]
48.13" [122.30]
29.55" [75.1] 1.94 [4.93]
16.37 [41.57]
6.14 [15.61]
1.19 [3.02]
9.72 [24.69]
4.00" [10.20]
9.72“ [25cm]
1.00” [2.5cm]
6.06” [15cm]
4.00" OR 6.00" DEEP PANS ON TOP 4.00" DEEP PANS ONLY ON BOTTOM
INSTALLATION NOTE: Refrigeration system is designed so that air will flow under the unit, through the compressor area and out the front of the unit. Any restriction to this air flow path will void the warranties. 36.00" [91.40]
33.59" [85.31]
2.50" [6.30]
Specifications
FRONT VIEW
RIGHT VIEW
1/6 Size Pan Cap.
# of Shelves
Shelf Area
Volume
h.p.
V/Hz/Ph
Amps
nema plug
Ship Weight
ST4448N-8
8
2
5.48ft2
16.00ft3
1/5
115/60/1
7.2
5-15P
316lbs/143kg
STD4448N-8
8
NA
NA
16.00ft
1/5
115/60/1
7.2
5-15P
398lbs/181kg
Model
3
Delfield reserves the right to make changes to the design or specifications without prior notice. 980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com
Printed in the U.S.A. DSST4448N-S 03/13
ST4448N Salad Top
Front-Breathing Self-Contained Salad Top Refrigerated Bases Models •
ST4448N-8
Two section with doors, eight pan capacity
•
STD4448N-8
Two section with drawers, eight pan capacity
Quantity _________________________________ CSI Section 11400 Approved ________________________________ Date _____________________________________
Standard Features
ST4448N-8
Specifications
Exterior top is one-piece 22-gauge stainless steel with integral 2.12” (5.4cm) square nosing on the front. The backsplash is full width and 4” (10cm) tall. Top of drawer unit has openings to accept eight 1/6-size 4” (10cm) deep plastic pans. Top of door unit has openings to accept eight 1/6-size 4” or 6” (10cm or 15cm) deep plastic pans. Adapter bars and 1/6 pans are supplied by Delfield. Lid is constructed of 20-gauge stainless steel. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 2.5” (6.4cm) at 86°F ambient room temperature, meeting NSF 7 requirements. One 48” x 10” x .5” (121.9cm x 25.4cm x 1.3cm) polyethylene cutting board treated with antimicrobial agent is mounted on the top at the front edge. Dual level pan brackets allow the pans to be lowered an additional inch in the unit without tools to provide additional pan temperature holding performance. Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel. Interior sides are thermoformed ABS plastic with integral shelf supports. Base is fully insulated with high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane. Refrigeration system uses HFC-404A refrigerant. Compressor
980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
• Patented air screen ensures product stays cold without drying it out • All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up • Durable, rugged stainless steel sides, top and front • Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty • Dual level pan brackets allow the pans to be lowered an additional inch in the unit without tools to provide additional pan temperature holding performance • Delfield supplies 1/6 size pans and positive placement adapter bars for top opening • Salad top refrigerators are standard with 10” wide, dishwasher safe polyethylene cutting board treated with antimicrobial agent • “D” prefix models feature Delfield’s new drawer system. Drawers are backed by a 10-year warranty on the track assembly • Environmentally friendly R404A refrigerant • High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global
• • • • • • •
Warming Potential) polyurethane keeps energy costs low Black recessed quick grip handle Standard on 5” casters for easy cleaning and installation 6’ cord and plug supplied One epoxy coated wire shelf standard, installed per door section ACT solid state electronic control "ST" models have a 4" stainless steel backsplash Three year parts and labor warranty and an additional two year compressor parts warranty
Options & Accessories • • • • • • • • •
Flat lift off cover 18” wide single tier overshelf Stainless steel finish on back Plastic laminate on front Additional wire shelves 3” casters, 3.75” ride height Door lock Exterior thermometer 220V/50 Hertz electrical system*
* Inclusion of this option will alter electrical specifications of the unit
is 1/5 H.P., with condenser coil and hot gas condensate evaporator mounted on rear of the cabinet. Evaporator coil is located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C). ACT control: ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions. Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 6’ (1.8m) long electrical cord and NEMA 5-15P plug. Casters: Equipment is mounted on 5” (13cm) diameter plate casters with front two locking. Equipment clearance above the floor is 2.5” (6cm). Doors have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet of door models has one adjustable epoxy-coated wire shelf. Drawers have a 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Each top drawer holds one full size 12” x 20 (30.5cm x 50.8cm) pan and three 1/9 size pans 4”- 6” (10.2cm - 15.2cm) deep. Each bottom drawer holds one 12” x 20 (30.5cm x 50.8cm) pan and three 1/9 size pans 4” (10.1cm) deep. Pans are supplied by others.
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619
www.delfield.com
ST4448N Salad Top: Front-Breathing Self-Contained Salad Top Refrigerated Bases
Project ___________________________________
13.63 1.39
28.37
12.96
12.36
22.66" [57.56]
48.13
NOSE OF UNIT TO EDGE OF DOOR
48.13 28.63
2.54
21.63
22.66" [57.56]
1.39
NOSE OF UNIT TO EDGE OF DOOR
] [50.65 ON 19.94"TH DIMENSI .13] WID SION DOOR 43.75" [111 DIMEN OR RI INTE
Front-Breathing Self-Contained Salad Top Refrigerated Bases
13.63
2.75
1.94 [4.93]
6.14 [15.61]
13.63
12.96
] " [50.65 ION 19.94TH DIMENS WID 1.13] DOOR 43.75" [11MENSION R DI INTERIO
16.96
ISOMETRIC VIEW
Pan Cutout Configuration ISOMETRIC VIEW
27.13
31.50" [80.01]
48.13" [122.30]
21.63
16.37 [41.57]
NOSE OF UNIT 29.55" [75.1] NOSE OF UNIT 19.60" [49.77] 19.60" [49.77] TO EDGE OF DRAWER TO EDGE OF DRAWER
9.72 [24.69]
1.19 [3.02] 9.72“ [25cm]
31.50" [80.01]
48.13" [122.30]
1.94 [4.93]
1.00” [2.5cm]
4.00" [10.20]
16.37 [41.57]
6.14 [15.61]
29.55" [75.1]
26.86" [68.22]
36.00" [91.40]
20.75" [52.70]
21.94" [55.73] 20.75" [52.70]
26.86" ALT. [68.22] SHELF
33.59" [85.31] 33.59" [85.31]
21.94" [55.73]
17.35" [44.08]
23.79" [60.43]
ALT. SHELF
12.98" [33.00]
] " [50.65 ION 19.94TH DIMENS WID 1.13] DOOR 43.75" [11MENSION R DI INTERIO
SHELF
17.35" [44.08]
7.53" [19.10] 12.98" [33.00] 6.11" [15.52]
SHELF
7.53" [19.10] 6.11" [15.52]
FRONT
2.50" [6.30]
2.50" [6.30]
ISOMETRIC VIEW ISOMETRIC VIEW RIGHT INTERIOR VIEW VIEW RIGHT INTERIOR
ST4448N-8 Right Side View
ST4448N-8 Elevation View
FRONT VIEW FRONT VIEW
ST4448N-8 ISO View
ISOMETRIC VIEW
31.50" 31.50" [80.01][80.01]
[122.30] 48.13"48.13" [122.30]
29.55" 29.55" [75.1] [75.1]
1.94 [4.93] 1.94 [4.93]
16.37 16.37 [41.57][41.57]
9.72 [24.69] 9.72 [24.69]
48.13" [122.30]
1.19 [3.02] 1.19 [3.02]
31.50" [80.01] 29.55" [75.1]
9.72“ 9.72“
4.00" [10.20] 4.00" [10.20]
1.19 [3.02]
[25cm][25cm] 16.37 [41.57]
1.941.00” [4.93]1.00”
6.14 [15.61] 6.14 [15.61]
9.72 [24.69]
6.06” 6.06” [15cm][15cm]
[2.5cm] [2.5cm]
6.14 [15.61]
9.72“ 19.60" [25cm][49.77]
1.00” [2.5cm]
4.00" [10.20]
6.06” [15cm]
4.00" ORDEEP 6.00"PANS DEEPON PANS 4.00" OR 6.00" TOPON TOP 4.00"PANS DEEPONLY PANSON ONLY ON BOTTOM 4.00" DEEP BOTTOM
ST4448N Salad Top
NOSE OF UNIT TO EDGE OF DOOR
6.06” [15cm]
23.79" [60.43]
36.00" [91.40]
22.66" [57.56]
9.72“ [25cm]
1.00” [2.5cm]
4.00" [10.20]
12.96
6.06” [15cm]
1.19 [3.02] 9.72 [24.69]
26.86" [68.22]
36.00"36.00" [91.40][91.40]
20.75" [52.70]
21.94" [55.73]
23.79" [60.43]
36.00" [91.40]
33.59"33.59" [85.31][85.31]
NOSE OF UNIT TO EDGE OF DRAWER
ALT. SHELF
33.59" [85.31]
17.35" [44.08] 12.98" [33.00]
SHELF
7.53" [19.10] 6.11" [15.52]
2.50" [6.30] 2.50" [6.30]
2.50" [6.30]
FRONT RIGHT VIEW RIGHT VIEWVIEW STD4448N-8 Right Side View
STD4448N-8 Elevation View FRONT VIEW FRONT VIEW
RIGHT INTERIOR VIEW ISOMETRIC VIEW STD4448N-8 ISO View
31.50" [80.01]
48.13" [122.30]
29.55" [75.1] 1.94 [4.93]
16.37 [41.57]
6.14 [15.61]
1.19 [3.02]
9.72 [24.69]
4.00" [10.20]
9.72“ [25cm]
1.00” [2.5cm]
6.06” [15cm]
4.00" OR 6.00" DEEP PANS ON TOP 4.00" DEEP PANS ONLY ON BOTTOM
INSTALLATION NOTE: Refrigeration system is designed so that air will flow under the unit, through the compressor area and out the front of the unit. Any restriction to this air flow path will void the warranties. 36.00" [91.40]
33.59" [85.31]
2.50" [6.30]
Specifications
FRONT VIEW
RIGHT VIEW
1/6 Size Pan Cap.
# of Shelves
Shelf Area
Volume
h.p.
V/Hz/Ph
Amps
nema plug
Ship Weight
ST4448N-8
8
2
5.48ft2
16.00ft3
1/5
115/60/1
7.2
5-15P
316lbs/143kg
STD4448N-8
8
NA
NA
16.00ft
1/5
115/60/1
7.2
5-15P
398lbs/181kg
Model
3
Delfield reserves the right to make changes to the design or specifications without prior notice. 980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com
Printed in the U.S.A. DSST4448N-S 03/13
