STA-RITE® HS+ Series
STA-RITE HS+ Series ®
Signature 2000 stainless steel 4" submersible pumps ®
Precision-engineered, high-quality, rugged Signature 2000® Stainless Steel Series Pumps deliver efficient, depend able performance even in rough, aggressive water. The Signature 2000 HS+ series puts the plus in HS+ with the advanced Pentek® XE Series™ motor. Superior Pentek motor technology supercharges an HS+ pump with extra stages, raising the performance bar without exceeding recommended service factor amps.
Applications Water systems…for residential, industrial, commercial, multiple housing and farm use.
Features Proven Staging System: Our proven SignaSeal™ staging system incorporates a harder-than-sand ceramic wear surface that when incorporated with our floating impeller design, greatly reduces problems with abrasives, sand lock-up and running dry. Discharge: Corrosion-resistant 300 grade stainless steel for durability in aggressive water. Large octagon wrench area for ease of installation. Discharge Bearing: Exclusive self-lubricating Nylatron bearing resists wear from sand. Intake: Corrosion-resistant 300 grade stainless steel for durability in aggressive water. Shaft: Positive drive from 7/16" hexagonal heavy-duty 300 grade stainless steel.
SPECIFICATIONS Shell: Stainless steel Diameter: 3-7/8" Discharge: Stainless steel Discharge Bearing: Nylatron® Intermediate Bearing: (On larger units) polycarbonate, nitrile rubber and stainless steel Impellers: Acetal Diffusers: Polycarbonate Suction Caps: Polycarbonate with stainless steel insert Thrust Pads: Proprietary spec. Shaft and Coupling: Stainless steel Intake: Stainless steel Intake Screen: Stainless steel Cable Guard: Stainless steel Check Valve: Acetal†
Coupling: Stainless steel press fit to pump shaft. Couples to all standard NEMA motors. Shell: Heavy-walled corrosion-resistant 300 grade stainless steel. Threaded for easy servicing. Hardware: All screws, washers and nuts are corrosion-resistant 300 grade stainless steel. Check Valve†: Durable internal spring-loaded check valve. Cable Guard: Corrosion-resistant stainless steel guard protects motor leads. Tapered ends prevent pump from catching on well. Intake Screen: Corrosion-proof. Pentek® XE Series™ Motor: 2 and 3 wire NEMA standard all stainless construction water-filled motors.
Agency Listings: CSA
HS+ Series SubPAK Ships complete with HS+ Series pump, XE Series motor and SMC-CR Control Box. Factory assembled and tested.
†Except where noted. Nylatron® is a registered trademark of Polymer Corp. All other brand or product names are trademarks or registered trademarks of Pentair Ltd.
1
s8127ws
STA-RITE HS+ Series ®
Signature 2000 stainless steel 4" submersible pumps ®
OUTLINE DIMENSIONS
ORDERING INFORMATION ASSEMBLED PUMP CATALOG NUMBER
LENGTH INCHES
WT. LBS.
S5P4HS+05231 S5P4HS+07231 S5P4HS+10231
29 35-1/4 38-3/4
26 32 32
STGS. PH VOLTS
5 GPM/3 WIRE
1/2 3/4 1
15 21 24
1 1 1
7 GPM/3 WIRE
230 230 230
1/2 3/4 1
12 15 19
1 1 1
230 230 230
S7P4HS+05231 S7P4HS+07231 S7P4HS+10231
27 30-3/4 35-1/2
26 30 30
1/2 3/4 1
9 12 15
1 1 1
230 230 230
S10P4HS05231PLUS S10P4HS07231PLUS S10P4HS10231PLUS
24-3/4 27-3/4 30-3/4
26-1/2 29-1/2 29-1/2
1/2 3/4 1
7 9 11
1 1 1
230 230 230
S15P4HS+05231 S15P4HS+07231 S15P4HS+10231
24-1/2 28 31-1/2
27 30 30
3/4 1
7 9
1 1
230 230
S20P4HS+07231 S20P4HS+10231
26 29-1/2
29 29
15 GPM/3 WIRE
20 GPM/3 WIRE
10
1-1/4" NPT
7 GPM
1-1/4" NPT
10 GPM
1-1/4" NPT
15 GPM
1-1/4" NPT
20 GPM
1-1/4" NPT
Dimensions (in inches) are for estimating purposes only.
Pump Performance: 7 GPM CAPACITY LITERS PER MINUTE
CAPACITY LITERS PER MINUTE 5
5 GPM
For dimensions, refer to Ordering Information table.
Pump Performance: 5 GPM 0
Discharge
Assembled Pump
10 GPM/3 WIRE
3-7/8
Pump End
HP
15
20
25
0
30
10
20
30
40
700
800
200 700
600 200
1H
1H
P
500
HP
150 1/2
400
HP
100 300
TOTAL HEAD IN FEET
3/4
TOTAL HEAD IN METERS
TOTAL HEAD IN FEET
500
150 3/4
HP
400 1/2
300
100
HP
TOTAL HEAD IN METERS
P
600
200 200
50
50 100
100
0
1
2
3
4
5
6
7
8
0
0
2
4
6
8
10
12
0
CAPACITY GALLONS PER MINUTE
CAPACITY GALLONS PER MINUTE
2
s8127ws
STA-RITE HS+ Series ®
Signature 2000 stainless steel 4" submersible pumps ®
Pump Performance: 10 GPM
Pump Performance: 15 GPM
CAPACITY LITERS PER MINUTE 0
10
20
30
40
CAPACITY LITERS PER MINUTE
50
0
60
600
5
10
15
20
25
30 120
400 175
1H
300
HP
400 3/4
300
1/2
HP
100
HP
75 200
TOTAL HEAD IN FEET
125
TOTAL HEAD IN METERS
1
TOTAL HEAD IN FEET
P
100
150
50
100
3
6
9
12
15
18
HP
80
250 1/2
HP
60
200
150 40 100 20
25
0
3/4
50
0
0
CAPACITY GALLONS PER MINUTE
5
10
15
20
25
0
CAPACITY GALLONS PER MINUTE
Pump Performance: 20 GPM CAPACITY LITERS PER MINUTE 0
100
200
300
400
500
600
350 100 300
1H
TOTAL HEAD IN FEET
250
75 3/4
HP
200
50 150
TOTAL HEAD IN METERS
P
100 25 50
0
5
10
15
20
25
30
35
0
CAPACITY GALLONS PER MINUTE
3
s8127ws
TOTAL HEAD IN METERS
350 500
293 WRIGHT STREET, DELAVAN, WI 53115 WWW.STA-RITE.COM PH: 888-782-7483 ORDERS FAX: 800-426-9446 Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.
s8127ws (05/23/13)
Signature 2000 stainless steel 4" submersible pumps ®
Precision-engineered, high-quality, rugged Signature 2000® Stainless Steel Series Pumps deliver efficient, depend able performance even in rough, aggressive water. The Signature 2000 HS+ series puts the plus in HS+ with the advanced Pentek® XE Series™ motor. Superior Pentek motor technology supercharges an HS+ pump with extra stages, raising the performance bar without exceeding recommended service factor amps.
Applications Water systems…for residential, industrial, commercial, multiple housing and farm use.
Features Proven Staging System: Our proven SignaSeal™ staging system incorporates a harder-than-sand ceramic wear surface that when incorporated with our floating impeller design, greatly reduces problems with abrasives, sand lock-up and running dry. Discharge: Corrosion-resistant 300 grade stainless steel for durability in aggressive water. Large octagon wrench area for ease of installation. Discharge Bearing: Exclusive self-lubricating Nylatron bearing resists wear from sand. Intake: Corrosion-resistant 300 grade stainless steel for durability in aggressive water. Shaft: Positive drive from 7/16" hexagonal heavy-duty 300 grade stainless steel.
SPECIFICATIONS Shell: Stainless steel Diameter: 3-7/8" Discharge: Stainless steel Discharge Bearing: Nylatron® Intermediate Bearing: (On larger units) polycarbonate, nitrile rubber and stainless steel Impellers: Acetal Diffusers: Polycarbonate Suction Caps: Polycarbonate with stainless steel insert Thrust Pads: Proprietary spec. Shaft and Coupling: Stainless steel Intake: Stainless steel Intake Screen: Stainless steel Cable Guard: Stainless steel Check Valve: Acetal†
Coupling: Stainless steel press fit to pump shaft. Couples to all standard NEMA motors. Shell: Heavy-walled corrosion-resistant 300 grade stainless steel. Threaded for easy servicing. Hardware: All screws, washers and nuts are corrosion-resistant 300 grade stainless steel. Check Valve†: Durable internal spring-loaded check valve. Cable Guard: Corrosion-resistant stainless steel guard protects motor leads. Tapered ends prevent pump from catching on well. Intake Screen: Corrosion-proof. Pentek® XE Series™ Motor: 2 and 3 wire NEMA standard all stainless construction water-filled motors.
Agency Listings: CSA
HS+ Series SubPAK Ships complete with HS+ Series pump, XE Series motor and SMC-CR Control Box. Factory assembled and tested.
†Except where noted. Nylatron® is a registered trademark of Polymer Corp. All other brand or product names are trademarks or registered trademarks of Pentair Ltd.
1
s8127ws
STA-RITE HS+ Series ®
Signature 2000 stainless steel 4" submersible pumps ®
OUTLINE DIMENSIONS
ORDERING INFORMATION ASSEMBLED PUMP CATALOG NUMBER
LENGTH INCHES
WT. LBS.
S5P4HS+05231 S5P4HS+07231 S5P4HS+10231
29 35-1/4 38-3/4
26 32 32
STGS. PH VOLTS
5 GPM/3 WIRE
1/2 3/4 1
15 21 24
1 1 1
7 GPM/3 WIRE
230 230 230
1/2 3/4 1
12 15 19
1 1 1
230 230 230
S7P4HS+05231 S7P4HS+07231 S7P4HS+10231
27 30-3/4 35-1/2
26 30 30
1/2 3/4 1
9 12 15
1 1 1
230 230 230
S10P4HS05231PLUS S10P4HS07231PLUS S10P4HS10231PLUS
24-3/4 27-3/4 30-3/4
26-1/2 29-1/2 29-1/2
1/2 3/4 1
7 9 11
1 1 1
230 230 230
S15P4HS+05231 S15P4HS+07231 S15P4HS+10231
24-1/2 28 31-1/2
27 30 30
3/4 1
7 9
1 1
230 230
S20P4HS+07231 S20P4HS+10231
26 29-1/2
29 29
15 GPM/3 WIRE
20 GPM/3 WIRE
10
1-1/4" NPT
7 GPM
1-1/4" NPT
10 GPM
1-1/4" NPT
15 GPM
1-1/4" NPT
20 GPM
1-1/4" NPT
Dimensions (in inches) are for estimating purposes only.
Pump Performance: 7 GPM CAPACITY LITERS PER MINUTE
CAPACITY LITERS PER MINUTE 5
5 GPM
For dimensions, refer to Ordering Information table.
Pump Performance: 5 GPM 0
Discharge
Assembled Pump
10 GPM/3 WIRE
3-7/8
Pump End
HP
15
20
25
0
30
10
20
30
40
700
800
200 700
600 200
1H
1H
P
500
HP
150 1/2
400
HP
100 300
TOTAL HEAD IN FEET
3/4
TOTAL HEAD IN METERS
TOTAL HEAD IN FEET
500
150 3/4
HP
400 1/2
300
100
HP
TOTAL HEAD IN METERS
P
600
200 200
50
50 100
100
0
1
2
3
4
5
6
7
8
0
0
2
4
6
8
10
12
0
CAPACITY GALLONS PER MINUTE
CAPACITY GALLONS PER MINUTE
2
s8127ws
STA-RITE HS+ Series ®
Signature 2000 stainless steel 4" submersible pumps ®
Pump Performance: 10 GPM
Pump Performance: 15 GPM
CAPACITY LITERS PER MINUTE 0
10
20
30
40
CAPACITY LITERS PER MINUTE
50
0
60
600
5
10
15
20
25
30 120
400 175
1H
300
HP
400 3/4
300
1/2
HP
100
HP
75 200
TOTAL HEAD IN FEET
125
TOTAL HEAD IN METERS
1
TOTAL HEAD IN FEET
P
100
150
50
100
3
6
9
12
15
18
HP
80
250 1/2
HP
60
200
150 40 100 20
25
0
3/4
50
0
0
CAPACITY GALLONS PER MINUTE
5
10
15
20
25
0
CAPACITY GALLONS PER MINUTE
Pump Performance: 20 GPM CAPACITY LITERS PER MINUTE 0
100
200
300
400
500
600
350 100 300
1H
TOTAL HEAD IN FEET
250
75 3/4
HP
200
50 150
TOTAL HEAD IN METERS
P
100 25 50
0
5
10
15
20
25
30
35
0
CAPACITY GALLONS PER MINUTE
3
s8127ws
TOTAL HEAD IN METERS
350 500
293 WRIGHT STREET, DELAVAN, WI 53115 WWW.STA-RITE.COM PH: 888-782-7483 ORDERS FAX: 800-426-9446 Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.
s8127ws (05/23/13)
