Standard Product Features Options & Accessories - Jean's Restaurant ...
Project
Quantity
Item #
Model Specified:
"W-Width" Pass-Thru Hot Food Holding Cabinets
CSI Section 11400 One, Two & Three Section Models, 32" Deep
R
SERIES Stainless Exterior & Interior
INTELA-TRAUL® Equipped!
A
SERIES Stainless Exterior, Anodized Aluminum Interior
1-Section Full Length Door Model 2-Section Full Length Door Model 3-Section Full Length Door Model 1-Section Half Length Door Model 2-Section Half Length Door Model 3-Section Half Length Door Model
RHF132WP-FHS★ RHF232WP-FHS★ RHF332WP-FHS RHF132WP-HHS★ RHF232WP-HHS★ RHF332WP-HHS
1-Section Full Length Door Model 2-Section Full Length Door Model 3-Section Full Length Door Model 1-Section Half Length Door Model 2-Section Half Length Door Model 3-Section Half Length Door Model
AHF132WP-FHS★ AHF232WP-FHS★ AHF332WP-FHS AHF132WP-HHS★ AHF232WP-HHS★ AHF332WP-HHS
In addition to the already outstanding cabinet construction you have come to expect from Traulsen, these dependable pass-thru hot food holding cabinets are built using our high performance ducted fan air distribution system. Unlike designs which simply radiate heat, this minimizes temperature stratification inside the cabinet, while providing for quicker daily start-up, lower energy usage, and reduced lifetime service costs. Each is supplied standard with easy to operate microprocessor controls, stainless steel exteriors, and are communications capable.
Model RHF132WP-FHS (shown with optional casters)
Standard Product Features
• R-Series: Stainless Steel Exterior & Interior • A-Series: Stainless Steel Exterior/Anodized Aluminum Interior • INTELA-TRAUL® Microprocessor Control System • Ducted Fan Air Distribution System • Standard Operating Temperature Range 135 to 180°F • One-Time Start-Up Temperature Adjustment Feature • ON/OFF Switch Located On Control Face • Full or Half Length Stainless Steel Doors With Locks • Self-Closing Doors With Stay Open Feature At 120 Degrees • Guaranteed For Life Cam-Lift Hinges • Guaranteed For Life Horizontal Work Flow Door Handles • Standard Door Hinging F & R: 132W = Right, 232W = Left/ Right, 332W = Left/Right/Right (other hingings available) • Automatically Activated Incandescent Lights • Stainless Steel Breaker Caps • Three Adjustable Wire Shelves Per Section, Supported On Pilasters (installed at the factory) • Special Heat Resistant Magnetic Snap-In Door Gaskets • Gasket Protecting Metal Door Liners • Stainless Steel One-Piece Louver Assembly - Front & Rear • 9' Cord & Plug Attached (one section models only) • Set of Four (4) 6" High Adjustable Stainless Steel Legs • Three Year Parts And Labor Warranty
Options & Accessories
Re-Hinging Feature For Door(s) No. 1 Type Tray Slides To Accommodate either (1) 18" x 26" or (2) 14" x 18" Pans No. 2 Type Tray Slides To Accommodate (1) 18" x 26" Pans• No. 3 Type Tray Slides To Accommodate (2) 12" x 20" Pans • No. 4 Type Tray Slides To Accommodate (1) 18" x 26" Pans (chrome rod type, equips 1/2 section) • Universal Type Tray Slides To Accommodate Either (1) 18" x 26" or (2) 14" x 18", or (2) 12" x 20" Pans • Additional Wire Shelves • Locking Hasps (padlocks supplied by others) • 115/60/1 Voltage (single section models only) • Export 220/50/1 Voltage • Stainless Steel Shelves In Lieu of Standard Wire • Kool Klad Exterior Laminate Decor • Set of Four (4) 6" High Casters In Lieu of Legs • Set of Four (4) 4-5/8" High Casters In Lieu of Legs • 4-1/2" High Stainless Steel Base In Lieu of Legs • 6" High Stainless Steel Kickplate (for use with standard legs) • Prison/Correctional Facilities Options • Clear Glass Door(s) In Place Of One Or More Solid Door(s) • • •
Noted models are ENERGY STAR® listed. Please refer to www.energystar.gov to view the most up-to-date product listing and performance data. ★
Listed by Underwriters Laboratories Inc., to U.S. and Canadian safety standards and Listed by NSF International.
Approval:________________________________________
TRAULSEN 4401 BLUE MOUND RD. PHONE 1 (800) 825-8220 Website: www.traulsen.com
FT. WORTH, TX 76106 FAX-MKTG. 1 (817) 624-4302
Project
Quantity
Item #
Model Specified:
CSI Section 11400
Specifications
Construction, Hardware and Insulation Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included. Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners. Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Both the cabinet and doors are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.
DIMENSIONAL DATA R/AHF132WP Net capacity cu. ft. 26.1 (739 cu l) Length - overall in. 297⁄8 (75.9 cm) Depth - overall in. 3715⁄16 (96.4 cm) Depth - over body in. 32 (81.3 cm) Depth - doors open 90° in. 833⁄8 (211.8 cm) Clear door width in.1 211⁄8 (53.6 cm) Clear half-door height in. 271⁄2 (69.9 cm) Clear full-door height in. 575⁄8 (146.3 cm) Height - overall on 6" legs 831⁄4 (211.5 cm) 345 (156 kg) RHF Net Wt. lbs.2 295 (134 kg) AHF Net Wt. lbs.2 No. Standard Shelves 3 18.8 (1.75 sq m) Shelf area sq. ft.3 ELECTRICAL DATA Voltage 208/115/60/1 Feed wires with Ground 4 Wattage @ 208V 1500 Full load amperes @ 208V 7.8 SHIPPING DATA Length - crated in. 35 (89 cm) Depth - crated in. 43 (109 cm) Height - crated in. 831⁄2 (212 cm) Volume - crated cu. ft. 71 (2011 cu l)
R/AHF232WP 55.8 (1581 cu l) 58 (147.3 cm) 3715⁄16 (96.4 cm) 32 (81.3 cm) 833⁄8 (211.8 cm) 211⁄8 (53.6 cm) 271⁄2 (69.9 cm) 575⁄8 (146.3 cm) 831⁄4 (211.5 cm) 585 (265 kg) 505 (229 kg) 6 37.6 (3.49 sq m)
R/AHF332WP 83.2 (2357 cu l) 861⁄8 (218.8 cm) 3715⁄16 (96.4 cm) 32 (81.3 cm) 833⁄8 (211.8 cm) 211⁄8 (53.6 cm) 271⁄2 (69.9 cm) 575⁄8 (146.3 cm) 831⁄4 (211.5 cm) 1040 (488 kg) 785 (356 kg) 9 56.4 (5.23 sq m)
208/115/60/1 208/115/60/1 4 4 3000 3000 15.5 15.5 63 (160 cm) 43 (109 cm) 831⁄2 (212 cm) 131 (3711 cu l)
Heating System A low watt density, serpentine style, heater is employed for the generation of electric heat. Low velocity air is forced across its large surface area to efficiently move heat radiating away from these through a down-air distribution duct, where it is then evenly distributed throughout the cabinet, assuring the proper holding environment for hot food product, without drying. A vent, located at the top of the cabinet, is included for positive humidity control.
Controller The easy to use, water resistant INTELA-TRAUL® microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, ON/OFF Button, Fahrenheit or Celsius Temperature Scale Display Capability, One-Time Start-Up Temperature Adjustment Feature, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open and Power Supply Interruption. Interior Standard interior arrangements include three (3) wire shelves per section, mounted on pilasters. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Optional tray slides may be purchased in combination with, or in lieu of these. Both standard and optional interior arrangements are completely installed at the factory. Warranties A three year parts and labor warranty is provided standard.
Elevation R/AHF132WP
Elevation R/AHF232WP
Elevation R/AHF332WP
91 (231 cm) 43 (109 cm) 831⁄2 (212 cm) 189 (5354 cu l)
NOTES NOTE: Figures in parentheses reflect metric equivalents. 1= Please note that the available cabinet width narrows for 5-3/8" from the top of the door frame to 20-1/8" in order to allow for the heater fans. 2= For shipping weights and dimensions please refer to form TR35875. 3= Area of standard shelf compliment only, does not include storage area of additional shelves or available on cabinet bottom.
Plan - R/AHF132WP
Plan - R/AHF232WP
Equipped With One NEMA L14-20P Plug (one section models only)
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties. Continued product development may necessitate specification changes without notice. Part No. TR35793 (revised 1/13)
TRAULSEN 4401 BLUE MOUND RD. PHONE 1 (800) 825-8220 Website: www.traulsen.com
Plan - R/AHF332WP
FT. WORTH, TX 76106 FAX-MKTG. 1 (817) 624-4302
Section - All Models
Quantity
Item #
Model Specified:
"W-Width" Pass-Thru Hot Food Holding Cabinets
CSI Section 11400 One, Two & Three Section Models, 32" Deep
R
SERIES Stainless Exterior & Interior
INTELA-TRAUL® Equipped!
A
SERIES Stainless Exterior, Anodized Aluminum Interior
1-Section Full Length Door Model 2-Section Full Length Door Model 3-Section Full Length Door Model 1-Section Half Length Door Model 2-Section Half Length Door Model 3-Section Half Length Door Model
RHF132WP-FHS★ RHF232WP-FHS★ RHF332WP-FHS RHF132WP-HHS★ RHF232WP-HHS★ RHF332WP-HHS
1-Section Full Length Door Model 2-Section Full Length Door Model 3-Section Full Length Door Model 1-Section Half Length Door Model 2-Section Half Length Door Model 3-Section Half Length Door Model
AHF132WP-FHS★ AHF232WP-FHS★ AHF332WP-FHS AHF132WP-HHS★ AHF232WP-HHS★ AHF332WP-HHS
In addition to the already outstanding cabinet construction you have come to expect from Traulsen, these dependable pass-thru hot food holding cabinets are built using our high performance ducted fan air distribution system. Unlike designs which simply radiate heat, this minimizes temperature stratification inside the cabinet, while providing for quicker daily start-up, lower energy usage, and reduced lifetime service costs. Each is supplied standard with easy to operate microprocessor controls, stainless steel exteriors, and are communications capable.
Model RHF132WP-FHS (shown with optional casters)
Standard Product Features
• R-Series: Stainless Steel Exterior & Interior • A-Series: Stainless Steel Exterior/Anodized Aluminum Interior • INTELA-TRAUL® Microprocessor Control System • Ducted Fan Air Distribution System • Standard Operating Temperature Range 135 to 180°F • One-Time Start-Up Temperature Adjustment Feature • ON/OFF Switch Located On Control Face • Full or Half Length Stainless Steel Doors With Locks • Self-Closing Doors With Stay Open Feature At 120 Degrees • Guaranteed For Life Cam-Lift Hinges • Guaranteed For Life Horizontal Work Flow Door Handles • Standard Door Hinging F & R: 132W = Right, 232W = Left/ Right, 332W = Left/Right/Right (other hingings available) • Automatically Activated Incandescent Lights • Stainless Steel Breaker Caps • Three Adjustable Wire Shelves Per Section, Supported On Pilasters (installed at the factory) • Special Heat Resistant Magnetic Snap-In Door Gaskets • Gasket Protecting Metal Door Liners • Stainless Steel One-Piece Louver Assembly - Front & Rear • 9' Cord & Plug Attached (one section models only) • Set of Four (4) 6" High Adjustable Stainless Steel Legs • Three Year Parts And Labor Warranty
Options & Accessories
Re-Hinging Feature For Door(s) No. 1 Type Tray Slides To Accommodate either (1) 18" x 26" or (2) 14" x 18" Pans No. 2 Type Tray Slides To Accommodate (1) 18" x 26" Pans• No. 3 Type Tray Slides To Accommodate (2) 12" x 20" Pans • No. 4 Type Tray Slides To Accommodate (1) 18" x 26" Pans (chrome rod type, equips 1/2 section) • Universal Type Tray Slides To Accommodate Either (1) 18" x 26" or (2) 14" x 18", or (2) 12" x 20" Pans • Additional Wire Shelves • Locking Hasps (padlocks supplied by others) • 115/60/1 Voltage (single section models only) • Export 220/50/1 Voltage • Stainless Steel Shelves In Lieu of Standard Wire • Kool Klad Exterior Laminate Decor • Set of Four (4) 6" High Casters In Lieu of Legs • Set of Four (4) 4-5/8" High Casters In Lieu of Legs • 4-1/2" High Stainless Steel Base In Lieu of Legs • 6" High Stainless Steel Kickplate (for use with standard legs) • Prison/Correctional Facilities Options • Clear Glass Door(s) In Place Of One Or More Solid Door(s) • • •
Noted models are ENERGY STAR® listed. Please refer to www.energystar.gov to view the most up-to-date product listing and performance data. ★
Listed by Underwriters Laboratories Inc., to U.S. and Canadian safety standards and Listed by NSF International.
Approval:________________________________________
TRAULSEN 4401 BLUE MOUND RD. PHONE 1 (800) 825-8220 Website: www.traulsen.com
FT. WORTH, TX 76106 FAX-MKTG. 1 (817) 624-4302
Project
Quantity
Item #
Model Specified:
CSI Section 11400
Specifications
Construction, Hardware and Insulation Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included. Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners. Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Both the cabinet and doors are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.
DIMENSIONAL DATA R/AHF132WP Net capacity cu. ft. 26.1 (739 cu l) Length - overall in. 297⁄8 (75.9 cm) Depth - overall in. 3715⁄16 (96.4 cm) Depth - over body in. 32 (81.3 cm) Depth - doors open 90° in. 833⁄8 (211.8 cm) Clear door width in.1 211⁄8 (53.6 cm) Clear half-door height in. 271⁄2 (69.9 cm) Clear full-door height in. 575⁄8 (146.3 cm) Height - overall on 6" legs 831⁄4 (211.5 cm) 345 (156 kg) RHF Net Wt. lbs.2 295 (134 kg) AHF Net Wt. lbs.2 No. Standard Shelves 3 18.8 (1.75 sq m) Shelf area sq. ft.3 ELECTRICAL DATA Voltage 208/115/60/1 Feed wires with Ground 4 Wattage @ 208V 1500 Full load amperes @ 208V 7.8 SHIPPING DATA Length - crated in. 35 (89 cm) Depth - crated in. 43 (109 cm) Height - crated in. 831⁄2 (212 cm) Volume - crated cu. ft. 71 (2011 cu l)
R/AHF232WP 55.8 (1581 cu l) 58 (147.3 cm) 3715⁄16 (96.4 cm) 32 (81.3 cm) 833⁄8 (211.8 cm) 211⁄8 (53.6 cm) 271⁄2 (69.9 cm) 575⁄8 (146.3 cm) 831⁄4 (211.5 cm) 585 (265 kg) 505 (229 kg) 6 37.6 (3.49 sq m)
R/AHF332WP 83.2 (2357 cu l) 861⁄8 (218.8 cm) 3715⁄16 (96.4 cm) 32 (81.3 cm) 833⁄8 (211.8 cm) 211⁄8 (53.6 cm) 271⁄2 (69.9 cm) 575⁄8 (146.3 cm) 831⁄4 (211.5 cm) 1040 (488 kg) 785 (356 kg) 9 56.4 (5.23 sq m)
208/115/60/1 208/115/60/1 4 4 3000 3000 15.5 15.5 63 (160 cm) 43 (109 cm) 831⁄2 (212 cm) 131 (3711 cu l)
Heating System A low watt density, serpentine style, heater is employed for the generation of electric heat. Low velocity air is forced across its large surface area to efficiently move heat radiating away from these through a down-air distribution duct, where it is then evenly distributed throughout the cabinet, assuring the proper holding environment for hot food product, without drying. A vent, located at the top of the cabinet, is included for positive humidity control.
Controller The easy to use, water resistant INTELA-TRAUL® microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, ON/OFF Button, Fahrenheit or Celsius Temperature Scale Display Capability, One-Time Start-Up Temperature Adjustment Feature, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open and Power Supply Interruption. Interior Standard interior arrangements include three (3) wire shelves per section, mounted on pilasters. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Optional tray slides may be purchased in combination with, or in lieu of these. Both standard and optional interior arrangements are completely installed at the factory. Warranties A three year parts and labor warranty is provided standard.
Elevation R/AHF132WP
Elevation R/AHF232WP
Elevation R/AHF332WP
91 (231 cm) 43 (109 cm) 831⁄2 (212 cm) 189 (5354 cu l)
NOTES NOTE: Figures in parentheses reflect metric equivalents. 1= Please note that the available cabinet width narrows for 5-3/8" from the top of the door frame to 20-1/8" in order to allow for the heater fans. 2= For shipping weights and dimensions please refer to form TR35875. 3= Area of standard shelf compliment only, does not include storage area of additional shelves or available on cabinet bottom.
Plan - R/AHF132WP
Plan - R/AHF232WP
Equipped With One NEMA L14-20P Plug (one section models only)
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties. Continued product development may necessitate specification changes without notice. Part No. TR35793 (revised 1/13)
TRAULSEN 4401 BLUE MOUND RD. PHONE 1 (800) 825-8220 Website: www.traulsen.com
Plan - R/AHF332WP
FT. WORTH, TX 76106 FAX-MKTG. 1 (817) 624-4302
Section - All Models
