STANDARD WATER MAIN and SANITARY SEWER SPECIFICATIONS
STANDARD WATER MAIN and SANITARY SEWER SPECIFICATIONS for the CITY OF MONROE, GEORGIA
NOVEMBER 2001 Revised November 2007
Standard Water and Sewer Specifications
Page 14
B.9.2.
Copies must be clear, clean, and legible
B.9.3.
Drawings shall include a site plan of the water or sanitary sewer lines and appurtenances as they were installed with any shop drawings needed for clarification or as requested by the Utility.
B.9.4.
As-builts must be stamped by a Professional Engineer registered in the State of Georgia.
B.9.5.
In addition to a printed set, a copy of the as-built drawings showing all existing and new water and sewer lines, streets, drainage, easements and topographic information shall be submitted to the Utility in AutoCAD 2006 format on a clearly labeled CD-ROM disk. The files must be georeferenced to the earth’s surface using State Plane 1983 Coordinate System (feet).
City of Monroe, Georgia Rev. November 2007
April 2001
NOVEMBER 2001 Revised November 2007
Standard Water and Sewer Specifications
Page 14
B.9.2.
Copies must be clear, clean, and legible
B.9.3.
Drawings shall include a site plan of the water or sanitary sewer lines and appurtenances as they were installed with any shop drawings needed for clarification or as requested by the Utility.
B.9.4.
As-builts must be stamped by a Professional Engineer registered in the State of Georgia.
B.9.5.
In addition to a printed set, a copy of the as-built drawings showing all existing and new water and sewer lines, streets, drainage, easements and topographic information shall be submitted to the Utility in AutoCAD 2006 format on a clearly labeled CD-ROM disk. The files must be georeferenced to the earth’s surface using State Plane 1983 Coordinate System (feet).
City of Monroe, Georgia Rev. November 2007
April 2001
