STERO SD1
Project:___________________________________________ Item No.___________________________________________ Quantity___________________
STERO SD1
DOOR-TYPE DISHWASHER STANDARD FEATURES ● 1.7 gallons per rack ● 37 racks per hour ● Stainless steel construction
● Field adjustable from straight to corner operation ● Door cycle switch controls machine operation ● Filling machine initially, auto fill after first cycle,
fill time field adjustable
● Solenoid operated positive s eating drain valve –
open and closed, no water waste
● Chemical pumps included ● Interchangeable upper and lower wash arms ● 1 H.P. pump motor ● Self-flushing stainless steel pump strainer, large
scrap accumulator
SD1 MACHINE RATINGS
Chemical Sanitizing
Racks per Hour (Maximum)
37
Wash Motor H.P.
1
Rinse Cycle – Gallons per Rack
1.7 Gallon/Rack
Incoming Water Temperature ( Recommended Minimum)
140°F
Required Minimum Final Rinse Temperature
120°F
ELECTRICAL CONNECTION MOTORS AND ELECTRIC TANK HEAT ELECTRIC SPECS. 120/60/1
ST50402 (11/14)
MACHINE WEIGHT
MINIMUM MAXIMUM RATED SUPPLY CIRCUIT OVERCURRENT AMPS CONDUCTOR PROTECTIVE AMPACITY DEVICE 14.0
20
20
MODEL
NET WEIGHT
SHIPPING WEIGHT
SD1
210 lbs.
235 lbs.
OVERALL DIMENSIONS: 69"H x 29"W x 32-1/2"D
Page 1 of 2
STERO SD1
DOOR-TYPE DISHWASHER PLUMBING NOTES: WATER HAMMER ARRESTOR (MEETING ASSE-1010 STANDARD OR EQUIVALENT) TO BE SUPPLIED (BY OTHERS) IN COMMON WATER SUPPLY LINE AT SERVICE CONNECTION. RECOMMENDED WATER HARDNESS TO BE 3 GRAINS OR LESS FOR BEST RESULTS.
Electrical and grounding connections must comply with the applicable portions of the National Electrical Code and/or other local electrical codes. Plumbing connections must comply with applicable sanitary, safety and plumbing codes. Drain and fill line configurations vary, some methods are shown on this drawing.
MISCELLANEOUS NOTES: ALL DIMENSIONS TAKEN FROM FLOOR LINE MAY INCREASE 3/4" OR DECREASE 1/2" DEPENDING ON LEG ADJUSTMENT. NET WEIGHT OF MACHINE: 210 LBS. DOMESTIC SHIPPING WEIGHT: 235 LBS. SIZE OF RACKS - 19-3/4" X 19-3/4" 3/4 H.P. MOTOR
E1
WALL
4 1/2" MIN CLEARANCE FROM CHAMBER FOR STRAIGHT THRU OR CORNER INSTALLATION
P1
CONNECTION INFORMATION
P2
CL
12 5/8" WALL
(*AFF - ABOVE FINISHED FLOOR)
13 5/8"
LEGEND E1 P1 P2
3/8"
ELECTRICAL CONNECTION: 1/2" CONDUIT HOLE, 66-7/16" AFF. COMMON WATER CONNECTION: 120°F WATER MIN. (RECOMMENDED 140°F); 3/4" FPT, 62-9/16" AFF. DRAIN: 2" NPT, 12-1/2" AFF
10 1/8" 4 1/2" MIN CLEARANCE TO TANK WALL FOR CORNER INSTALLATION
E1
CL
28 3/4" OVERALL WIDTH
CL
24 7/8"
2 1/2"
22"
CL
20 1/2" 11"
P1
75 7/16" 2 1/8"
20 3/4"
2 1/8"
70 3/4" MAX HANDLE HEIGHT
69" OVERALL HEIGHT
16 7/8" DOOR OPENING
68 5/8"
66 7/16"
62 9/16"
57 9/16" 34" 40 1/4" MIN HANDLE HEIGHT
P2
12 1/2" FLOOR
CL
CL
7 1/2" 26 3/16"
5/16-18 SST TRUSS HD SCREW 5/16-18 SST LOCKWASHER 5/16-18 SST HEX HD NUT
CHEMICAL SUPPLY CONTAINER
P2
2" MAX.
SUGGESTED TABLE FABRICATION
30"
30° 1-1/4" ROLL
9" MAX
MODEL: SD-1 D-950292 REV. A
TANK
10-1/2"
5/8"
21" ±1/8 USE SILICONE SEALER BETWEEN TABLE AND LIP OF TANK TO PREVENT LEAKAGE
1-1/4" 21-3/4" ±1/8
In line with its policy to continually improve its products, Stero reserves the right to change materials and specifications without notice. Page 2 of 2
STERO, a division of Illinois Tool Works, Inc. 1758 Corporate Circle Petaluma, CA 94954 Phone: 800-762-7600 Fax: 707-762-5036 Website: Stero.com
ST50402 (11/14)
STERO SD1
DOOR-TYPE DISHWASHER STANDARD FEATURES ● 1.7 gallons per rack ● 37 racks per hour ● Stainless steel construction
● Field adjustable from straight to corner operation ● Door cycle switch controls machine operation ● Filling machine initially, auto fill after first cycle,
fill time field adjustable
● Solenoid operated positive s eating drain valve –
open and closed, no water waste
● Chemical pumps included ● Interchangeable upper and lower wash arms ● 1 H.P. pump motor ● Self-flushing stainless steel pump strainer, large
scrap accumulator
SD1 MACHINE RATINGS
Chemical Sanitizing
Racks per Hour (Maximum)
37
Wash Motor H.P.
1
Rinse Cycle – Gallons per Rack
1.7 Gallon/Rack
Incoming Water Temperature ( Recommended Minimum)
140°F
Required Minimum Final Rinse Temperature
120°F
ELECTRICAL CONNECTION MOTORS AND ELECTRIC TANK HEAT ELECTRIC SPECS. 120/60/1
ST50402 (11/14)
MACHINE WEIGHT
MINIMUM MAXIMUM RATED SUPPLY CIRCUIT OVERCURRENT AMPS CONDUCTOR PROTECTIVE AMPACITY DEVICE 14.0
20
20
MODEL
NET WEIGHT
SHIPPING WEIGHT
SD1
210 lbs.
235 lbs.
OVERALL DIMENSIONS: 69"H x 29"W x 32-1/2"D
Page 1 of 2
STERO SD1
DOOR-TYPE DISHWASHER PLUMBING NOTES: WATER HAMMER ARRESTOR (MEETING ASSE-1010 STANDARD OR EQUIVALENT) TO BE SUPPLIED (BY OTHERS) IN COMMON WATER SUPPLY LINE AT SERVICE CONNECTION. RECOMMENDED WATER HARDNESS TO BE 3 GRAINS OR LESS FOR BEST RESULTS.
Electrical and grounding connections must comply with the applicable portions of the National Electrical Code and/or other local electrical codes. Plumbing connections must comply with applicable sanitary, safety and plumbing codes. Drain and fill line configurations vary, some methods are shown on this drawing.
MISCELLANEOUS NOTES: ALL DIMENSIONS TAKEN FROM FLOOR LINE MAY INCREASE 3/4" OR DECREASE 1/2" DEPENDING ON LEG ADJUSTMENT. NET WEIGHT OF MACHINE: 210 LBS. DOMESTIC SHIPPING WEIGHT: 235 LBS. SIZE OF RACKS - 19-3/4" X 19-3/4" 3/4 H.P. MOTOR
E1
WALL
4 1/2" MIN CLEARANCE FROM CHAMBER FOR STRAIGHT THRU OR CORNER INSTALLATION
P1
CONNECTION INFORMATION
P2
CL
12 5/8" WALL
(*AFF - ABOVE FINISHED FLOOR)
13 5/8"
LEGEND E1 P1 P2
3/8"
ELECTRICAL CONNECTION: 1/2" CONDUIT HOLE, 66-7/16" AFF. COMMON WATER CONNECTION: 120°F WATER MIN. (RECOMMENDED 140°F); 3/4" FPT, 62-9/16" AFF. DRAIN: 2" NPT, 12-1/2" AFF
10 1/8" 4 1/2" MIN CLEARANCE TO TANK WALL FOR CORNER INSTALLATION
E1
CL
28 3/4" OVERALL WIDTH
CL
24 7/8"
2 1/2"
22"
CL
20 1/2" 11"
P1
75 7/16" 2 1/8"
20 3/4"
2 1/8"
70 3/4" MAX HANDLE HEIGHT
69" OVERALL HEIGHT
16 7/8" DOOR OPENING
68 5/8"
66 7/16"
62 9/16"
57 9/16" 34" 40 1/4" MIN HANDLE HEIGHT
P2
12 1/2" FLOOR
CL
CL
7 1/2" 26 3/16"
5/16-18 SST TRUSS HD SCREW 5/16-18 SST LOCKWASHER 5/16-18 SST HEX HD NUT
CHEMICAL SUPPLY CONTAINER
P2
2" MAX.
SUGGESTED TABLE FABRICATION
30"
30° 1-1/4" ROLL
9" MAX
MODEL: SD-1 D-950292 REV. A
TANK
10-1/2"
5/8"
21" ±1/8 USE SILICONE SEALER BETWEEN TABLE AND LIP OF TANK TO PREVENT LEAKAGE
1-1/4" 21-3/4" ±1/8
In line with its policy to continually improve its products, Stero reserves the right to change materials and specifications without notice. Page 2 of 2
STERO, a division of Illinois Tool Works, Inc. 1758 Corporate Circle Petaluma, CA 94954 Phone: 800-762-7600 Fax: 707-762-5036 Website: Stero.com
ST50402 (11/14)
