sterosct-76s conveyor series
Product Specification Sheet Item #: ___________________________________________
A/A File #: ___________________________________________
STERO SCT-76S CONVEYOR SERIES SCT-76S-CSA: Chemically sanitizes with a low temperature final rinse, eliminating the need for a booster heater. Easy to operate and clean, accessibility to components for maintenance and a basic design that produces clean dishes…that is the STERO Scrapper-Washer. Specialized optional equipment may be added to your machine and will give additional flexibility to your dishroom. STANDARD FEATURES
Food soil removed is transferred to the outboard scrap catchment automatically by the rinse water feed-back system. This keeps the scrapper tank water clean and removes food soil from the scrapping tank. The full rack width washing pattern with our 300 GPM pump powers this dishwashing workhorse. Rinsing and sanitizing is controlled by STERO’s exclusive rack activated final rinse which guarantees accurate, trouble free cleaning.
STANDARD EQUIPMENT FEATURES
Power Scrapper: The STERO engineered scrapping pattern utilizes fixed upper and lower stainless manifolds of special design, fitted with large stricture free jets which effectively strip the food soil from all types of ware, inside and out, as it passes through the spray pattern. The food soil drops onto flat perforated stainless steel screens that cover the tank. The screens are held in an inclined position, which, coupled with the pump action and the final rinse waters feed back, automatically moves the food soil to a scrap catchment, which is mounted outside the tank. A specially designed pump with a 1 HP motor distributes 185 gallons of water over the ware every minute. The pump is integral with the motor, has a stainless steel impeller, packless seal, and ceramic sealing seat and an extended stainless steel motor shaft, which assures perfect alignment and quiet operation. The screens, manifolds and curtains are easily removed through the door without the BENEFIT
Full perimeter frame
Long machine life
Auto fill
Proper water fill level at start up and during ongoing operation
Auto start
First rack starts machine operation push button activation not required
Center fed manifolds
Even distribution of wash water for uniform and consistent results
Outboard scrap catchment
Complete removal of food soil from machine reduction of chemical usage
OPTIONAL EQUIPMENT FEATURES
BENEFIT
Mounted circuit breakers
Individual circuit protection for motors and tank heat
Auto dwell
Longer washing action for difficult to clean items
Table limit switch
Easy operation of machine with a single worker
Cold water aquastat
Regulated scrap tank water temperature to avoid food soil adhesion
RACK
The scrapper tank does the work of a manual pre-rinsing operation—but does it faster and better with 185 GPM of re-circulated water, stripping food soil from above and below the ware. Efficient scrapping prior to washing adds up to detergent savings.
Construction: Tank and hood are formed from 304/18 – 8 No. 4 mill finish stainless steel, fully welded with a minimum of bolt together construction. Frame is heavy-duty stainless steel flat stock construction conforming to NSF Standard No. 3. The machine is supported by enclosed stainless steel feet. All internal piping, fittings, risers and manifolds are stainless steel.
SCT-76S, SCT-76S-CSA CONVEYOR SERIES: MULTIPLE TANK RACK CONVEYOR SCRAPPER-WASHER, HIGH TEMP 20” RACK
SCT-76S Rack Conveyor Series: Combines a powerful scrapper with our 44" wash section, creating an enormous washing pattern of 76". This time, labor and detergent saving warewasher is perfect for today’s sculleries.
CONVEYOR
SCT-76S, SCT-76S-CSA
Design: Two tank 20" Rack Conveyor, 76" in length with a power scrapper, power wash and a sanitizing final rinse. A scrap catchment mounted outside of the tank and adjacent to the soiled ware entrance contains a large scrap basket that is easily removed even while the machine is in operation. Flexible strip curtains at each end separate the scrapping, washing and final rinse. Two large inspection doors allow easy access to interior of machine. All components are easily accessible for cleaning and maintenance.
Product Specification Sheet
STERO SCT-76S CONVEYOR SERIES STANDARD FEATURES Continued use of tools. The larger sized scrap section on the SCT-76S allows for better separation of scrap and wash functions for lower chemical consumption and better results. Power Wash: STERO’s unique stainless steel manifolds are center-fed, fitted with stricture free jets with directional vanes and can be easily removed without tools. Center-fed manifolds distribute an even flow of wash water over the entire perimeter of the rack, ensuring consistent results. The SCT-76S distributes 300 GPM of detergent water pumped over the ware by a 2 HP motor and pump assembly.
switches, and electric tank heating element contactors (when specified) are mounted in a stainless steel control box for one point connection. Standard Electrical Specifications: 208/240-60-1, 208/240-60-3, 460/480-60-3. Door Safety Switch: Prevents the machine from operating if the door is open. The machine will automatically shut off if the door is opened while the warewasher is running. Bell-Type Stainless Steel Skimmer: With hinged cover. Acts as overflow and facilitates removal of fats and oils from the wash tank.
Drain Valves: STERO designed poppet type drain valve; stainless steel Both motors have extended stainless steel shafts with packless ceramic seals and stainless steel impellers that align perfectly with the seats and casting assures leak proof and trouble free life. Externally controlled with spring-loaded shafts to prevent damage...the finest in the pump housing. industry. The pumps have easily removable inspection plates—front and Required Tank Heating end—and are self draining. Stainless steel perforated strainer pans cover the tank. NSF requires that the water in all power wash and power rinse tanks be maintained at specified temperatures. STERO offers four types of Automatic Fill: Fills the machine at the push of a button and keeps it heating equipment to maintain these temperatures. Please specify the full during operation. In the event of low water in the tank, the system one that suits your job conditions. will automatically re-fill to the proper level. Automatic Start: Rack activated switch starts conveyor and pumps eliminating the need for a manual start. Automatic Shut Down: Shuts down machine operation during idle periods. Stainless Steel Front Enclosure Panel: Protects motors and controls from moisture. Kit 55: STERO mounts a ¾" pressure reducing valve, shock-arrestor and flow pressure gauge in the final rinse line prior to the rinse solenoid valve. The shock-arrestor prevents line hammer and will double the life of the valve. The PRV will allow adjustment of the final rinse pressure and the gauge will give visual proof when it is correct. Common Drain: STERO connects overflow and drain valves so that one drain rough-in will service the entire machine. Motors: 2 HP, 1750 rpm, 300 GPM, heavy duty with sealed bearings and overload protection.
Power Wash Tank Only Electric: Two 5 kW stainless steel elements (10 kW total) are mounted in the bottom of the tank. The units are thermostatically controlled and have STERO’s low water protection system. The elements, thermostat, LWP and contactor are all inter-wired to the control panel. Gas: STERO has developed another first for the industry. A gas fired tank-heating system that will heat the water to the correct temperature and maintain it during operation. Burners, constructed of woven ceramic fiber, are thermostatically controlled and feature a manual off-on valve. STERO’s positive low water protection system safeguards the unit in the event of a low water condition. Steam Injectors: Two stainless steel injectors with silencers are mounted in the tank. A thermostat controls a special solenoid valve, and maintains the correct temperature. Steam Coils: STERO designed and built stainless steel steam coils are mounted in the tank. Steam coils allow condensed steam to be returned to the steam generator, a decided advantage when there is a question of steam purity. A thermostat controls a special steam solenoid valve and maintains the correct temperature. A steam trap is mounted on the steam return line.
Final Rinse: Stainless rinse arms mounted above and below are fitted with directional fanjets, which create a full coverage spray pattern for maximum rinsing and sanitation. The rack activates STERO’s final rinse switch and hot water solenoid valve with stainless seat. A AVAILABLE OPTIONS vacuum breaker mounted downstream from the solenoid and 6" above the upper rinse complete STERO’s rinse system. The SCT-76S-CSA Vent Cowls: 10" wide × 25" deep with extended Splash Guards front sanitizes with chlorine which is dispensed by STERO’s peristaltic pump. and rear. 3 7/8" × 24 7/8" I.D. vent opening centered on the 10" length. The CSA eliminates the need for a 180° final rinse booster. Mounted Circuit Breakers: Protection for motors and heating circuit. Final rinse water is collected in a sump and diverted to the powerAutomatic Dwell Conveyor: Automatic dwell, as an optional addition, scrapping tank and bypasses the wash tank. allows operator to stop rack over the wash manifold for longer washing Thermometers: One each for scrapper, wash and final rinse. action. Conveyor: A center-drive stainless steel pawl bar with stainless steel Cold Water Aquastat: Tempers scrap tank water to avoid adhesion of pawls conveys the racks through the spray pattern and out onto the food proteins to ware. clean dish table. The conveyor is powered by an integral ¼ HP motor Sideloader: RAC-27 allows loading of the racks at a right angle to the and speed reducing drive which has a built-in release to prevent damage to racks or machine in the event of a rack jam. The racks ride conveyor, permitting dedicated clean and soiled sides of the room, increased length RAC-32 will accept sheet pans. on 12 gauge stainless steel tracks. Standard Electrical Features: All motors on STERO conveyor machines are factory wired in waterproof conduit and fittings to a common connection point. The motors are protected by thermal-overloads with manual reset buttons. The magnetic motor starters, start-stop
Table Limit Switch: Mounted on a clean dish table. The switch shuts off the conveyor when engaged by a rack. This allows single person operation of machine until racks fill unload table.
Product Specification Sheet
STERO SCT-76S CONVEYOR SERIES
STERO, a division of Illinois Tool Works Inc. Phone: 800-762-7600
3200 Lakeville Highway
Fax: 707-762-5036
Petaluma, CA 94954
WWW.STERO.COM
Printed in the USA
Product Specification Sheet
STERO SCT-76S CONVEYOR SERIES
STERO, a division of Illinois Tool Works Inc. Phone: 800-762-7600
3200 Lakeville Highway
Fax: 707-762-5036
Petaluma, CA 94954
WWW.STERO.COM
Printed in the USA
A/A File #: ___________________________________________
STERO SCT-76S CONVEYOR SERIES SCT-76S-CSA: Chemically sanitizes with a low temperature final rinse, eliminating the need for a booster heater. Easy to operate and clean, accessibility to components for maintenance and a basic design that produces clean dishes…that is the STERO Scrapper-Washer. Specialized optional equipment may be added to your machine and will give additional flexibility to your dishroom. STANDARD FEATURES
Food soil removed is transferred to the outboard scrap catchment automatically by the rinse water feed-back system. This keeps the scrapper tank water clean and removes food soil from the scrapping tank. The full rack width washing pattern with our 300 GPM pump powers this dishwashing workhorse. Rinsing and sanitizing is controlled by STERO’s exclusive rack activated final rinse which guarantees accurate, trouble free cleaning.
STANDARD EQUIPMENT FEATURES
Power Scrapper: The STERO engineered scrapping pattern utilizes fixed upper and lower stainless manifolds of special design, fitted with large stricture free jets which effectively strip the food soil from all types of ware, inside and out, as it passes through the spray pattern. The food soil drops onto flat perforated stainless steel screens that cover the tank. The screens are held in an inclined position, which, coupled with the pump action and the final rinse waters feed back, automatically moves the food soil to a scrap catchment, which is mounted outside the tank. A specially designed pump with a 1 HP motor distributes 185 gallons of water over the ware every minute. The pump is integral with the motor, has a stainless steel impeller, packless seal, and ceramic sealing seat and an extended stainless steel motor shaft, which assures perfect alignment and quiet operation. The screens, manifolds and curtains are easily removed through the door without the BENEFIT
Full perimeter frame
Long machine life
Auto fill
Proper water fill level at start up and during ongoing operation
Auto start
First rack starts machine operation push button activation not required
Center fed manifolds
Even distribution of wash water for uniform and consistent results
Outboard scrap catchment
Complete removal of food soil from machine reduction of chemical usage
OPTIONAL EQUIPMENT FEATURES
BENEFIT
Mounted circuit breakers
Individual circuit protection for motors and tank heat
Auto dwell
Longer washing action for difficult to clean items
Table limit switch
Easy operation of machine with a single worker
Cold water aquastat
Regulated scrap tank water temperature to avoid food soil adhesion
RACK
The scrapper tank does the work of a manual pre-rinsing operation—but does it faster and better with 185 GPM of re-circulated water, stripping food soil from above and below the ware. Efficient scrapping prior to washing adds up to detergent savings.
Construction: Tank and hood are formed from 304/18 – 8 No. 4 mill finish stainless steel, fully welded with a minimum of bolt together construction. Frame is heavy-duty stainless steel flat stock construction conforming to NSF Standard No. 3. The machine is supported by enclosed stainless steel feet. All internal piping, fittings, risers and manifolds are stainless steel.
SCT-76S, SCT-76S-CSA CONVEYOR SERIES: MULTIPLE TANK RACK CONVEYOR SCRAPPER-WASHER, HIGH TEMP 20” RACK
SCT-76S Rack Conveyor Series: Combines a powerful scrapper with our 44" wash section, creating an enormous washing pattern of 76". This time, labor and detergent saving warewasher is perfect for today’s sculleries.
CONVEYOR
SCT-76S, SCT-76S-CSA
Design: Two tank 20" Rack Conveyor, 76" in length with a power scrapper, power wash and a sanitizing final rinse. A scrap catchment mounted outside of the tank and adjacent to the soiled ware entrance contains a large scrap basket that is easily removed even while the machine is in operation. Flexible strip curtains at each end separate the scrapping, washing and final rinse. Two large inspection doors allow easy access to interior of machine. All components are easily accessible for cleaning and maintenance.
Product Specification Sheet
STERO SCT-76S CONVEYOR SERIES STANDARD FEATURES Continued use of tools. The larger sized scrap section on the SCT-76S allows for better separation of scrap and wash functions for lower chemical consumption and better results. Power Wash: STERO’s unique stainless steel manifolds are center-fed, fitted with stricture free jets with directional vanes and can be easily removed without tools. Center-fed manifolds distribute an even flow of wash water over the entire perimeter of the rack, ensuring consistent results. The SCT-76S distributes 300 GPM of detergent water pumped over the ware by a 2 HP motor and pump assembly.
switches, and electric tank heating element contactors (when specified) are mounted in a stainless steel control box for one point connection. Standard Electrical Specifications: 208/240-60-1, 208/240-60-3, 460/480-60-3. Door Safety Switch: Prevents the machine from operating if the door is open. The machine will automatically shut off if the door is opened while the warewasher is running. Bell-Type Stainless Steel Skimmer: With hinged cover. Acts as overflow and facilitates removal of fats and oils from the wash tank.
Drain Valves: STERO designed poppet type drain valve; stainless steel Both motors have extended stainless steel shafts with packless ceramic seals and stainless steel impellers that align perfectly with the seats and casting assures leak proof and trouble free life. Externally controlled with spring-loaded shafts to prevent damage...the finest in the pump housing. industry. The pumps have easily removable inspection plates—front and Required Tank Heating end—and are self draining. Stainless steel perforated strainer pans cover the tank. NSF requires that the water in all power wash and power rinse tanks be maintained at specified temperatures. STERO offers four types of Automatic Fill: Fills the machine at the push of a button and keeps it heating equipment to maintain these temperatures. Please specify the full during operation. In the event of low water in the tank, the system one that suits your job conditions. will automatically re-fill to the proper level. Automatic Start: Rack activated switch starts conveyor and pumps eliminating the need for a manual start. Automatic Shut Down: Shuts down machine operation during idle periods. Stainless Steel Front Enclosure Panel: Protects motors and controls from moisture. Kit 55: STERO mounts a ¾" pressure reducing valve, shock-arrestor and flow pressure gauge in the final rinse line prior to the rinse solenoid valve. The shock-arrestor prevents line hammer and will double the life of the valve. The PRV will allow adjustment of the final rinse pressure and the gauge will give visual proof when it is correct. Common Drain: STERO connects overflow and drain valves so that one drain rough-in will service the entire machine. Motors: 2 HP, 1750 rpm, 300 GPM, heavy duty with sealed bearings and overload protection.
Power Wash Tank Only Electric: Two 5 kW stainless steel elements (10 kW total) are mounted in the bottom of the tank. The units are thermostatically controlled and have STERO’s low water protection system. The elements, thermostat, LWP and contactor are all inter-wired to the control panel. Gas: STERO has developed another first for the industry. A gas fired tank-heating system that will heat the water to the correct temperature and maintain it during operation. Burners, constructed of woven ceramic fiber, are thermostatically controlled and feature a manual off-on valve. STERO’s positive low water protection system safeguards the unit in the event of a low water condition. Steam Injectors: Two stainless steel injectors with silencers are mounted in the tank. A thermostat controls a special solenoid valve, and maintains the correct temperature. Steam Coils: STERO designed and built stainless steel steam coils are mounted in the tank. Steam coils allow condensed steam to be returned to the steam generator, a decided advantage when there is a question of steam purity. A thermostat controls a special steam solenoid valve and maintains the correct temperature. A steam trap is mounted on the steam return line.
Final Rinse: Stainless rinse arms mounted above and below are fitted with directional fanjets, which create a full coverage spray pattern for maximum rinsing and sanitation. The rack activates STERO’s final rinse switch and hot water solenoid valve with stainless seat. A AVAILABLE OPTIONS vacuum breaker mounted downstream from the solenoid and 6" above the upper rinse complete STERO’s rinse system. The SCT-76S-CSA Vent Cowls: 10" wide × 25" deep with extended Splash Guards front sanitizes with chlorine which is dispensed by STERO’s peristaltic pump. and rear. 3 7/8" × 24 7/8" I.D. vent opening centered on the 10" length. The CSA eliminates the need for a 180° final rinse booster. Mounted Circuit Breakers: Protection for motors and heating circuit. Final rinse water is collected in a sump and diverted to the powerAutomatic Dwell Conveyor: Automatic dwell, as an optional addition, scrapping tank and bypasses the wash tank. allows operator to stop rack over the wash manifold for longer washing Thermometers: One each for scrapper, wash and final rinse. action. Conveyor: A center-drive stainless steel pawl bar with stainless steel Cold Water Aquastat: Tempers scrap tank water to avoid adhesion of pawls conveys the racks through the spray pattern and out onto the food proteins to ware. clean dish table. The conveyor is powered by an integral ¼ HP motor Sideloader: RAC-27 allows loading of the racks at a right angle to the and speed reducing drive which has a built-in release to prevent damage to racks or machine in the event of a rack jam. The racks ride conveyor, permitting dedicated clean and soiled sides of the room, increased length RAC-32 will accept sheet pans. on 12 gauge stainless steel tracks. Standard Electrical Features: All motors on STERO conveyor machines are factory wired in waterproof conduit and fittings to a common connection point. The motors are protected by thermal-overloads with manual reset buttons. The magnetic motor starters, start-stop
Table Limit Switch: Mounted on a clean dish table. The switch shuts off the conveyor when engaged by a rack. This allows single person operation of machine until racks fill unload table.
Product Specification Sheet
STERO SCT-76S CONVEYOR SERIES
STERO, a division of Illinois Tool Works Inc. Phone: 800-762-7600
3200 Lakeville Highway
Fax: 707-762-5036
Petaluma, CA 94954
WWW.STERO.COM
Printed in the USA
Product Specification Sheet
STERO SCT-76S CONVEYOR SERIES
STERO, a division of Illinois Tool Works Inc. Phone: 800-762-7600
3200 Lakeville Highway
Fax: 707-762-5036
Petaluma, CA 94954
WWW.STERO.COM
Printed in the USA
