Submittal - Torrco
Submittal
C 650
Snow Melting Control 650
01/11 Snow Melting
Job ___________________________
Replaces: New
Contact_ _______________________
Designer_ ______________________
The Snow Melting Control 650 is designed to operate mechanical equipment to melt snow off of an outdoor slab. It can be used for any single zone electric or hydronic snow melting application that requires manual start/stop operation. This control uses Pulse Width Modulation (PWM) and slab Outdoor Reset to maintain slab temperature. It is capable of controlling a pump, valve, or electrical contact while reading outdoor air temperature.
Cover Off
Side View
Front View H1113 3 Made in Canada
Power 24 V (ac) ±10% 2 VA 32 V (dc) ±20% 0.04 A Relays 240 V (ac) 10 A 1/3 hp pilot duty 240 VA
6/8” (18 mm)
H1113 3 Made in Canada
Power 24 V (ac) ±10% 2 VA 32 V (dc) ±20% 0.04 A Relays 240 V (ac) 10 A 1/3 hp pilot duty 240 VA
°F
°F
HEAT
Item
On Time
CWCO Idling Melting
Start
Stop
Outdoor Slab Sensor Target Slab
Melt at power up
4–3/4” (120 mm)
Melt at power up
Outdoor Slab Sensor Target Slab
HEAT
Pulse Width Modulation
1 2 3 4 Heat
On –––
No power
Signal wiring must be rated at least 300 V.
CWCO Idling Melting
Start
Stop
Snow Melting Control 650 Pulse Width Modulation
Snow Melting Control 650 On ––– Power Off C– R+
Item
On Time
1 2 3 4
Power Off C– R+
5 6 7 8 9
Com Slab Out System Sen Sen Sen
Heat
No power
Signal wiring must be rated at least 300 V.
5 6 7 8 9 System
Com Slab Out Sen Sen Sen
6/8” (18 mm) 2–7/8” (74 mm)
1–3/8” (37 mm)
7/8” (22 mm)
Specifications------------------------------------------------------ Features--------------------------Snow Melting Control 650 Pulse Width Modulation Literature Control Packaged weight Dimensions Enclosure Approvals Ambient conditions Power supply Relays Sensors –Included On time Melting Idling CWCO Temperature display Warranty
D650, A650, D001, D070, D072 Microprocessor control. This is not a safety (limit) control 1.3 lb. (600 g) 4-3/4” H x 2-7/8” W x 7/8” D (120 x 74 x 22 mm) White PVC plastic, NEMA type 1 CSA C US, meets class B: ICES & FCC Part 15 Indoor use only, -20 to 120°F (-30 to 50°C), RH ≤90% Noncondensing 24 V (ac) ±10%, 50/60 Hz, 3 VA, 24 V (dc) ±10%, 0.03 A 240 V (ac) 10 A, 1/3 hp NTC thermistor, 10 kΩ @ 77°F (25°C ±0.2°C) ß=3892 Outdoor Sensor 070 and Slab Sensor 072 0:30 to 19:50 hours to ‘Infinite’ 34 to 45°F (1 to 7°C) Off, 23 to 34°F (Off, -5 to 1°C) Off, -22 to 23°F (Off, -30 to –5°C) Fahrenheit / Celsius Limited 3 Year (See D650 for full warranty)
• • • • • •
Slab Outdoor Reset Temporary Idle Manual Override Warm Weather Shut Down Cold Weather Cut Out CSA C US certified (approved to applicable UL standards)
Special requirements N/A
www.tekmarcontrols.com
of 2
© 2011
C 650 - 01/11
Sample Application Drawing Below is a sample application drawing for this product. This application may include other tekmar products that are required for installation. More sample applications can be found at www.tekmarcontrols.com. Sample Mechanical diagram
650
S2
070
P1
S1
Snow Melting B1
Sample Electrical diagram Meets Class B: Canadian ICES FCC Part 15 Made in Canada tektra 906-09
Legend B1 = Modulating Boiler (Enable only) P1 = System Pump S1 = Slab Sensor S2 = Outdoor Sensor
Power: 24 V (ac) ± 10% 50/60 Hz 3 VA 24 V (dc) ± 10% 0.03A Relays: 240 V (ac) 10 A 1/3hp
H1113E
Melt at power up
Item
On Off
CWCO Idling Melting
On Time
Start
Stop Date Code
Outdoor Slab Sensor Target Slab
Snow Melting Control 650 Pulse Width Modulation
1 2 3 4 Power C- R+ Heat
Signal wiring must be rated at least 300V
No power
7 8 9 Com Slab Out System Sen Sen Sen 5
6
S1
S2 P1
B1
C R
120 V (ac)
L N
tekmar Control Systems Ltd., Canada, tekmar Control Systems, Inc., U.S.A. Head Office: 5100 Silver Star Road, Vernon, B.C. Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650 Web Site: www.tekmarcontrols.com Product design, software and literature are Copyright © 2011 by: tekmar Control Systems Ltd. and tekmar Control Systems, Inc.
2 of 2
All specifications are subject to change without notice. Printed in Canada. C 650 - 01/11.
C 650
Snow Melting Control 650
01/11 Snow Melting
Job ___________________________
Replaces: New
Contact_ _______________________
Designer_ ______________________
The Snow Melting Control 650 is designed to operate mechanical equipment to melt snow off of an outdoor slab. It can be used for any single zone electric or hydronic snow melting application that requires manual start/stop operation. This control uses Pulse Width Modulation (PWM) and slab Outdoor Reset to maintain slab temperature. It is capable of controlling a pump, valve, or electrical contact while reading outdoor air temperature.
Cover Off
Side View
Front View H1113 3 Made in Canada
Power 24 V (ac) ±10% 2 VA 32 V (dc) ±20% 0.04 A Relays 240 V (ac) 10 A 1/3 hp pilot duty 240 VA
6/8” (18 mm)
H1113 3 Made in Canada
Power 24 V (ac) ±10% 2 VA 32 V (dc) ±20% 0.04 A Relays 240 V (ac) 10 A 1/3 hp pilot duty 240 VA
°F
°F
HEAT
Item
On Time
CWCO Idling Melting
Start
Stop
Outdoor Slab Sensor Target Slab
Melt at power up
4–3/4” (120 mm)
Melt at power up
Outdoor Slab Sensor Target Slab
HEAT
Pulse Width Modulation
1 2 3 4 Heat
On –––
No power
Signal wiring must be rated at least 300 V.
CWCO Idling Melting
Start
Stop
Snow Melting Control 650 Pulse Width Modulation
Snow Melting Control 650 On ––– Power Off C– R+
Item
On Time
1 2 3 4
Power Off C– R+
5 6 7 8 9
Com Slab Out System Sen Sen Sen
Heat
No power
Signal wiring must be rated at least 300 V.
5 6 7 8 9 System
Com Slab Out Sen Sen Sen
6/8” (18 mm) 2–7/8” (74 mm)
1–3/8” (37 mm)
7/8” (22 mm)
Specifications------------------------------------------------------ Features--------------------------Snow Melting Control 650 Pulse Width Modulation Literature Control Packaged weight Dimensions Enclosure Approvals Ambient conditions Power supply Relays Sensors –Included On time Melting Idling CWCO Temperature display Warranty
D650, A650, D001, D070, D072 Microprocessor control. This is not a safety (limit) control 1.3 lb. (600 g) 4-3/4” H x 2-7/8” W x 7/8” D (120 x 74 x 22 mm) White PVC plastic, NEMA type 1 CSA C US, meets class B: ICES & FCC Part 15 Indoor use only, -20 to 120°F (-30 to 50°C), RH ≤90% Noncondensing 24 V (ac) ±10%, 50/60 Hz, 3 VA, 24 V (dc) ±10%, 0.03 A 240 V (ac) 10 A, 1/3 hp NTC thermistor, 10 kΩ @ 77°F (25°C ±0.2°C) ß=3892 Outdoor Sensor 070 and Slab Sensor 072 0:30 to 19:50 hours to ‘Infinite’ 34 to 45°F (1 to 7°C) Off, 23 to 34°F (Off, -5 to 1°C) Off, -22 to 23°F (Off, -30 to –5°C) Fahrenheit / Celsius Limited 3 Year (See D650 for full warranty)
• • • • • •
Slab Outdoor Reset Temporary Idle Manual Override Warm Weather Shut Down Cold Weather Cut Out CSA C US certified (approved to applicable UL standards)
Special requirements N/A
www.tekmarcontrols.com
of 2
© 2011
C 650 - 01/11
Sample Application Drawing Below is a sample application drawing for this product. This application may include other tekmar products that are required for installation. More sample applications can be found at www.tekmarcontrols.com. Sample Mechanical diagram
650
S2
070
P1
S1
Snow Melting B1
Sample Electrical diagram Meets Class B: Canadian ICES FCC Part 15 Made in Canada tektra 906-09
Legend B1 = Modulating Boiler (Enable only) P1 = System Pump S1 = Slab Sensor S2 = Outdoor Sensor
Power: 24 V (ac) ± 10% 50/60 Hz 3 VA 24 V (dc) ± 10% 0.03A Relays: 240 V (ac) 10 A 1/3hp
H1113E
Melt at power up
Item
On Off
CWCO Idling Melting
On Time
Start
Stop Date Code
Outdoor Slab Sensor Target Slab
Snow Melting Control 650 Pulse Width Modulation
1 2 3 4 Power C- R+ Heat
Signal wiring must be rated at least 300V
No power
7 8 9 Com Slab Out System Sen Sen Sen 5
6
S1
S2 P1
B1
C R
120 V (ac)
L N
tekmar Control Systems Ltd., Canada, tekmar Control Systems, Inc., U.S.A. Head Office: 5100 Silver Star Road, Vernon, B.C. Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650 Web Site: www.tekmarcontrols.com Product design, software and literature are Copyright © 2011 by: tekmar Control Systems Ltd. and tekmar Control Systems, Inc.
2 of 2
All specifications are subject to change without notice. Printed in Canada. C 650 - 01/11.
