QPL POWER INDUCTORS -RF SURFACE MOUNT INDUCTORS - SURFACE MOUNT MLP1812
Power Inductors - Level T Certified
M27/368 Ferrite Core
PART NUMBER
MIL DASH NUMBER
MLP1812-101KT MLP1812-121KT MLP1812-151KT MLP1812-181KT MLP1812-221KT MLP1812-271KT MLP1812-331KT MLP1812-391KT MLP1812-471KT MLP1812-561KT MLP1812-681KT MLP1812-821KT MLP1812-102KT MLP1812-122KT MLP1812-152KT MLP1812-182KT MLP1812-222KT MLP1812-272KT MLP1812-332KT MLP1812-392KT MLP1812-472KT MLP1812-562KT MLP1812-682KT MLP1812-822KT MLP1812-103KT MLP1812-123KT MLP1812-153KT MLP1812-183KT MLP1812-223KT MLP1812-273KT MLP1812-333KT
01T 02T 03T 04T 05T 06T 07T 08T 09T 10T 11T 12T 13T 14T 15T 16T 17T 18T 19T 20T 21T 22T 23T 24T 25T 26T 27T 28T 29T 30T 31T
L µH ±10% @1 kHz *
1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330
DCR OHMS MAX
.113 .199 .222 .240 .268 .288 .323 .347 .401 .437 .472 .548 .608 .670 .780 .875 1.200 1.404 1.578 1.848 2.064 2.268 3.408 3.648 4.320 6.000 6.432 8.400 9.680 12.720 15.240
CURRENT RATING AMPS
1.050 1.000 .950 .900 .850 .800 .750 .700 .650 .650 .600 .600 .550 .550 .450 .400 .370 .330 .300 .280 .260 .240 .220 .200 .180 .160 .140 .120 .120 .100 .090
INCREMENTAL CURRENT AMPS **
2.400 2.158 1.980 1.028 1.697 1.513 1.397 1.250 1.131 1.060 .990 .871 .772 .752 .693 .614 .515 .465 .425 .376 .366 .336 .297 .267 .238 .208 .183 .158 .143 .129 .118
MARKING: M27/368-XX (MIL DASH #) XXXXY (DATE CODE & LOT CODE) 24226
.118/.134 (3.0/3.4)
.165/.189 (4.2/4.8)
.114/.138 (2.9/3.5) OVER TERMINAL 0.066 REF. (1.68) 0.045/0.075 (1.14/1.91) TYP.
0.016/0.031 (0.40/0.80) TERMINAL LENGTH TYP.
RECOMMENDED FOOT PRINT
in. (mm)
.177 (4.5) .059 (1.5) .110 (2.8)
NOTES: • Operating temperature -55°C to +130°C • Grade 5, encapsulated
• Weight maximum 1.5 grams
• DWV 200 Vrms @ sea level 80 Vrms @ 70,000 feet
• Rated current is based on a 40°C temperature rise at an ambient temperature of 90°C (Ferrite) * Measured at 1 V ac open circuit with no dc current at 1 KHz ** The dc current at which the inductance will decrease by a maximum of 5 percent from the inductance at zero dc current
TAPE AND REEL SPECS: Pcs./Reel maximum: Pitch between parts: Tape width: Reel diameter inches:
2200 8 mm 12 mm 13
One Magnetics Pkwy, Gowanda, NY 14070 • (t) 716-532-2234 • (f) 716-532-2702 •
[email protected] 01-06-12
www.gowanda.com