SW/SD/VS33 - Submersible Sump/Effluent Pump - Pump Express
HYDROMATIC
®
SW/SD/VS33 Submersible Sump/Effluent Pump • Basement Sumps • Septic Tank Effluent • Industrial Circulators • Transfer Tanks
S D3
3 Sho w n
SW/SD/VS33 - Submersible Sump/Effluent Pump
SW/SD/VS33 SUMP/EFFLUENT CLASSIC PUMP SERIES
SW33
SD33
VS33 Page 2
The Hydromatic classic submersible pump series is specifically designed to meet the demands of residential sump and septic tank effluent applications. The 1-1/2 inch NPT discharge pump is a 1/3 horsepower, energy-efficient motor, in both automatic and manual configurations; and can handle capacities up to 47 gallons per minute and heads to 26 feet. This Hydromatic submersible pump features a heavy-duty cast iron construction that provides the durability for a long service life, as well as assisting in dissipating heat from the motor, for cooler operation. The pump’s anti-clog, vortex-design impeller is made from a tough non-corrosive, thermoplastic material, which is capable of providing long, trouble-free service even in demanding applications. The oil-filled motor provides superior cooling characteristics, allowing the motor to run cool and quiet in extended service. This oil-filled design also provides permanent lubrication of the shaft bearings, minimizing maintenance and extending the service life of the pump. In addition, to protect against overheating, the motor windings contain an automatic reset thermal overload. Automatic models feature an easily adjustable, wide-angle float, diaphragm pressure switch, or a vertical mechanical float switch, all three switch configurations incorporating a unique “piggyback” plug arrangement. This piggyback design allows for simple conversion to manual operation by simply removing the switch plug and inserting the motor plug directly into the electrical outlet. This feature provides an easy way of periodically cycling the pump to ensure it is operating properly.
SW/SD/VS33 - Submersible Sump/Effluent Pump
BENEFITS A. Water-resistant power cord with molded plug is available in 10 or 20 foot lengths. B. Heavy-duty, cast iron construction provides long life and assists in heat dissipation for cooler motor operation. C. Oil-filled motor provides superior cooling and permanent lubrication of bearings, minimizing maintenance and extending service life. D. Lower ball and upper bronze-sleeve bearings support motor shaft, minimizing the effects of impeller thrust loads. This design results in minimum friction and perfect alignment of rotor, for longer service from pump. A
E. Energy-efficient 1/3 HP motor runs cool and quiet for long life. Motor windings contain automaticreset, thermal overload protection. F. Mechanical shaft seal is carbon and ceramic faced for long, leakproof life.
B
D
C
G. The anti-clog, vortex-design impeller creates whirlpool pumping action to effectively remove solids-laden wastewater from sump. The impeller is made from a tough, thermoplastic material to prevent corrosion, withstand abrasion and provide long, trouble-free life. H. Discharge is 1-1/2 inch NPT. I. Multiple strainer inlets prevent foreign objects from clogging pump — providing optimum operation and reduced maintenance.
E
J. Bottom-suction design alleviates buildup of debris providing optimum pump performance and reduced maintenance.
D F
H G
I J
Page 3
SW/SD/VS33 - Submersible Sump/Effluent Pump
Details Pump Characteristics
Performance Data
Automatic Models
SW/SD/VS33A1
Horsepower
1/3
Full Load Amps
10.0
Motor Type
30
Shaded Pole (4 pole)
R. P. M.
1550
Phase Ø
1
Voltage
115
Hertz
60
Operation
8
1/3
20
HP
4 10
Intermittent
Temperature
120° F Ambient
NEMA Design
A
Insulation
40
12
Head, feet
Submersible
Head, meters
Pump/Motor Unit
0 0 Capacity, US GPM 0 liters/second 0.0
1-1/2" NPT
Solids Handling
1/2"
Unit Weight
30 lbs.
Power Cord
18/3, SJTW, 10' std. (20' optional)
20
30
1.0
cu meters/hr 0
Class A
Discharge Size
10
2
40
50
2.0 4
6
60
3.0 8
10
12
Dimensional Data 3-1/2"
3-1/2"
5-7/8" 4-1/2" 1-1/2" NPT
SW33 3-1/2"
Materials of Construction Handle
Steel
Lubricating Oil
Dielectric Oil
Motor Housing
Cast Iron
Shaft
Steel
Mechanical Shaft Seal
11-1/8" 7-7/8" PUMP ON
10-1/8"
VS33
DISCHARGE HEIGHT 3"
Seal Faces: Carbon/Ceramic
3-3/8" PUMP OFF
Seal Body: Anodized Steel Spring: Stainless Steel Bellows: Buna-N
Impeller
Thermoplastic
Upper Bearing
Brass Iron Sleeve
Lower Bearing
Single Row Ball Bearing
Strainer/Base
Plastic
Fasteners
Stainless Steel
7-7/8" PUMP 11-1/8" ON
10-1/8"
SD33
DISCHARGE HEIGHT 3"
3-3/8" PUMP OFF
All dimensions in inches. Metric for international use. Component dimensions may vary ± 1/8 inch. Dimensional data not for construction purpose unless certified. Dimensions and weights are approximate. On/Off level adjustable. We reserve the right to make revisions to our product and their specifications without notice. – Your Authorized Local Distributor –
USA 1840 Baney Road Ashland, Ohio 44805 Tel: 419-289-3042 Fax: 419-281-4087 © 2002 Hydromatic
®
Ashland, Ohio. All Rights Reserved.
www.hydromatic.com ISO 9001 Registered Quality System
CANADA 269 Trillium Drive Kitchener, Ontario, Canada N2G 4W5 Tel: 519-896-2163 Fax: 519-896-6337 Item #: W-02-6390 5/02 5M
®
SW/SD/VS33 Submersible Sump/Effluent Pump • Basement Sumps • Septic Tank Effluent • Industrial Circulators • Transfer Tanks
S D3
3 Sho w n
SW/SD/VS33 - Submersible Sump/Effluent Pump
SW/SD/VS33 SUMP/EFFLUENT CLASSIC PUMP SERIES
SW33
SD33
VS33 Page 2
The Hydromatic classic submersible pump series is specifically designed to meet the demands of residential sump and septic tank effluent applications. The 1-1/2 inch NPT discharge pump is a 1/3 horsepower, energy-efficient motor, in both automatic and manual configurations; and can handle capacities up to 47 gallons per minute and heads to 26 feet. This Hydromatic submersible pump features a heavy-duty cast iron construction that provides the durability for a long service life, as well as assisting in dissipating heat from the motor, for cooler operation. The pump’s anti-clog, vortex-design impeller is made from a tough non-corrosive, thermoplastic material, which is capable of providing long, trouble-free service even in demanding applications. The oil-filled motor provides superior cooling characteristics, allowing the motor to run cool and quiet in extended service. This oil-filled design also provides permanent lubrication of the shaft bearings, minimizing maintenance and extending the service life of the pump. In addition, to protect against overheating, the motor windings contain an automatic reset thermal overload. Automatic models feature an easily adjustable, wide-angle float, diaphragm pressure switch, or a vertical mechanical float switch, all three switch configurations incorporating a unique “piggyback” plug arrangement. This piggyback design allows for simple conversion to manual operation by simply removing the switch plug and inserting the motor plug directly into the electrical outlet. This feature provides an easy way of periodically cycling the pump to ensure it is operating properly.
SW/SD/VS33 - Submersible Sump/Effluent Pump
BENEFITS A. Water-resistant power cord with molded plug is available in 10 or 20 foot lengths. B. Heavy-duty, cast iron construction provides long life and assists in heat dissipation for cooler motor operation. C. Oil-filled motor provides superior cooling and permanent lubrication of bearings, minimizing maintenance and extending service life. D. Lower ball and upper bronze-sleeve bearings support motor shaft, minimizing the effects of impeller thrust loads. This design results in minimum friction and perfect alignment of rotor, for longer service from pump. A
E. Energy-efficient 1/3 HP motor runs cool and quiet for long life. Motor windings contain automaticreset, thermal overload protection. F. Mechanical shaft seal is carbon and ceramic faced for long, leakproof life.
B
D
C
G. The anti-clog, vortex-design impeller creates whirlpool pumping action to effectively remove solids-laden wastewater from sump. The impeller is made from a tough, thermoplastic material to prevent corrosion, withstand abrasion and provide long, trouble-free life. H. Discharge is 1-1/2 inch NPT. I. Multiple strainer inlets prevent foreign objects from clogging pump — providing optimum operation and reduced maintenance.
E
J. Bottom-suction design alleviates buildup of debris providing optimum pump performance and reduced maintenance.
D F
H G
I J
Page 3
SW/SD/VS33 - Submersible Sump/Effluent Pump
Details Pump Characteristics
Performance Data
Automatic Models
SW/SD/VS33A1
Horsepower
1/3
Full Load Amps
10.0
Motor Type
30
Shaded Pole (4 pole)
R. P. M.
1550
Phase Ø
1
Voltage
115
Hertz
60
Operation
8
1/3
20
HP
4 10
Intermittent
Temperature
120° F Ambient
NEMA Design
A
Insulation
40
12
Head, feet
Submersible
Head, meters
Pump/Motor Unit
0 0 Capacity, US GPM 0 liters/second 0.0
1-1/2" NPT
Solids Handling
1/2"
Unit Weight
30 lbs.
Power Cord
18/3, SJTW, 10' std. (20' optional)
20
30
1.0
cu meters/hr 0
Class A
Discharge Size
10
2
40
50
2.0 4
6
60
3.0 8
10
12
Dimensional Data 3-1/2"
3-1/2"
5-7/8" 4-1/2" 1-1/2" NPT
SW33 3-1/2"
Materials of Construction Handle
Steel
Lubricating Oil
Dielectric Oil
Motor Housing
Cast Iron
Shaft
Steel
Mechanical Shaft Seal
11-1/8" 7-7/8" PUMP ON
10-1/8"
VS33
DISCHARGE HEIGHT 3"
Seal Faces: Carbon/Ceramic
3-3/8" PUMP OFF
Seal Body: Anodized Steel Spring: Stainless Steel Bellows: Buna-N
Impeller
Thermoplastic
Upper Bearing
Brass Iron Sleeve
Lower Bearing
Single Row Ball Bearing
Strainer/Base
Plastic
Fasteners
Stainless Steel
7-7/8" PUMP 11-1/8" ON
10-1/8"
SD33
DISCHARGE HEIGHT 3"
3-3/8" PUMP OFF
All dimensions in inches. Metric for international use. Component dimensions may vary ± 1/8 inch. Dimensional data not for construction purpose unless certified. Dimensions and weights are approximate. On/Off level adjustable. We reserve the right to make revisions to our product and their specifications without notice. – Your Authorized Local Distributor –
USA 1840 Baney Road Ashland, Ohio 44805 Tel: 419-289-3042 Fax: 419-281-4087 © 2002 Hydromatic
®
Ashland, Ohio. All Rights Reserved.
www.hydromatic.com ISO 9001 Registered Quality System
CANADA 269 Trillium Drive Kitchener, Ontario, Canada N2G 4W5 Tel: 519-896-2163 Fax: 519-896-6337 Item #: W-02-6390 5/02 5M
