T E C H T A L K
DOT12_section_b:Dottie Catalog 5.qxd
11/7/08
8:59 AM
Page 13
Rod Hanging System Accessories PC 4605 *UNIB
**SCP Series
UPC
Nut Drivers UNIB* 17595 SCP14**
81217
SCP38**
81218
SCP50**
81248
SS3009
11209
Pole Tool PT612
81220
SUGGESTED GUIDELINES
* Steel & Wood Universal Side & Bottom Installation Tool 1/4" Concrete Installation Tool 3/8" Concrete Installation Tool 1/2" Concrete Installation Tool Installation Tool Kit for Concrete Anchors
USAGE COLOR STD MSTR WT/STD UNIT
500 – 1500 RPM drill speed
Red
1
5
0.25#
Ea
Blue
1
5
0.25#
Ea
Blue
1
5
0.25#
Ea
Blue
1
5
0.25#
Ea
1
10
2.92#
Ea
1
1
7.30#
Ea
6' - 12' Pole Tool (includes three Jaw Chuck)
Save in Installation Costs STEEL BASE MATERIAL
SPEED OF INSTALLATION
Steel Dottie Rod Hanger Beam Clamp
Save $2.80
Save
WOOD BASE MATERIAL
Fast Slow 53%
CONCRETE BASE MATERIAL
Fast Medium
Low High
Very Easy Average
Low High
Easy Medium
TYPICAL COST INSTALLED (3/8” SIZE) LABOR/MIN TIME LABOR MATERIAL TOTAL
$0.77 $0.77
1 4
$0.77 $3.08
$1.73 $2.22
$2.50 $5.30
TYPICAL COST INSTALLED (3/8” SIZE) LABOR/MIN TIME LABOR MATERIAL TOTAL
$0.77 $0.77
1 5
$0.77 $3.85
$1.42 $.073
$2.19 $6.54
Save 67% SPEED OF INSTALLED INSTALLATION COST INSTALLATION
Concrete Dottie Rod Hanger Medium Steel Dropin Slow
Save $4.22
INSTALLATION
SPEED OF INSTALLED INSTALLATION COST INSTALLATION
Wood Dottie Rod Hanger Hanger Bolt Rod/Coupler
Save $4.35
INSTALLED COST
Low High
Easy Hard
TYPICAL COST INSTALLED (3/8” SIZE) LABOR/MIN TIME LABOR MATERIAL TOTAL
$0.77 $0.77
5 11
$3.85 $8.47
$1.42 $1.02
$5.27 $9.49
Save 44%
*Labor rates based on ENR 20-City average of hourly pay scales for Electricians, Plumbers and Steamfitters, report dated June 2002.
T E C H
ANCHORS & KITS > ROD HANGING SYSTEM > ACCESSORIES
CAT NO
SOCKET DESCRIPTION
T A L K
Installation Procedure Always wear eye protection. fastener with a smooth steady Hanging System fastener into motion until the coupling is the socket driver, and install If pre-drilling is required, select firmly seated against the perpendicular to the base the recommended drill bit type material surface. Drive the and diameter. Drill to the surface of the base material. appropriate embedment Thread the appropriate STEEL CONCRETE WOOD depth, adding at least one diameter steel threaded diameter (1/4” to 1/2”) to rod or threaded bolt into the drilling depth to the coupling. The threadprevent the tip of the ed rod or bolt should fully fastener from running into a engage the thread length dead end at the rear of the of the coupling on a anchor hole. Select the vertical mount fastener. appropriate socket driver for the anchor size and type Please visit the Dottie to be installed and mount website at lhdottie.com into chuck of installation for approvals. tool. Insert the Dottie Rod
B11 See new products at lhdottie.com
11/7/08
8:59 AM
Page 13
Rod Hanging System Accessories PC 4605 *UNIB
**SCP Series
UPC
Nut Drivers UNIB* 17595 SCP14**
81217
SCP38**
81218
SCP50**
81248
SS3009
11209
Pole Tool PT612
81220
SUGGESTED GUIDELINES
* Steel & Wood Universal Side & Bottom Installation Tool 1/4" Concrete Installation Tool 3/8" Concrete Installation Tool 1/2" Concrete Installation Tool Installation Tool Kit for Concrete Anchors
USAGE COLOR STD MSTR WT/STD UNIT
500 – 1500 RPM drill speed
Red
1
5
0.25#
Ea
Blue
1
5
0.25#
Ea
Blue
1
5
0.25#
Ea
Blue
1
5
0.25#
Ea
1
10
2.92#
Ea
1
1
7.30#
Ea
6' - 12' Pole Tool (includes three Jaw Chuck)
Save in Installation Costs STEEL BASE MATERIAL
SPEED OF INSTALLATION
Steel Dottie Rod Hanger Beam Clamp
Save $2.80
Save
WOOD BASE MATERIAL
Fast Slow 53%
CONCRETE BASE MATERIAL
Fast Medium
Low High
Very Easy Average
Low High
Easy Medium
TYPICAL COST INSTALLED (3/8” SIZE) LABOR/MIN TIME LABOR MATERIAL TOTAL
$0.77 $0.77
1 4
$0.77 $3.08
$1.73 $2.22
$2.50 $5.30
TYPICAL COST INSTALLED (3/8” SIZE) LABOR/MIN TIME LABOR MATERIAL TOTAL
$0.77 $0.77
1 5
$0.77 $3.85
$1.42 $.073
$2.19 $6.54
Save 67% SPEED OF INSTALLED INSTALLATION COST INSTALLATION
Concrete Dottie Rod Hanger Medium Steel Dropin Slow
Save $4.22
INSTALLATION
SPEED OF INSTALLED INSTALLATION COST INSTALLATION
Wood Dottie Rod Hanger Hanger Bolt Rod/Coupler
Save $4.35
INSTALLED COST
Low High
Easy Hard
TYPICAL COST INSTALLED (3/8” SIZE) LABOR/MIN TIME LABOR MATERIAL TOTAL
$0.77 $0.77
5 11
$3.85 $8.47
$1.42 $1.02
$5.27 $9.49
Save 44%
*Labor rates based on ENR 20-City average of hourly pay scales for Electricians, Plumbers and Steamfitters, report dated June 2002.
T E C H
ANCHORS & KITS > ROD HANGING SYSTEM > ACCESSORIES
CAT NO
SOCKET DESCRIPTION
T A L K
Installation Procedure Always wear eye protection. fastener with a smooth steady Hanging System fastener into motion until the coupling is the socket driver, and install If pre-drilling is required, select firmly seated against the perpendicular to the base the recommended drill bit type material surface. Drive the and diameter. Drill to the surface of the base material. appropriate embedment Thread the appropriate STEEL CONCRETE WOOD depth, adding at least one diameter steel threaded diameter (1/4” to 1/2”) to rod or threaded bolt into the drilling depth to the coupling. The threadprevent the tip of the ed rod or bolt should fully fastener from running into a engage the thread length dead end at the rear of the of the coupling on a anchor hole. Select the vertical mount fastener. appropriate socket driver for the anchor size and type Please visit the Dottie to be installed and mount website at lhdottie.com into chuck of installation for approvals. tool. Insert the Dottie Rod
B11 See new products at lhdottie.com
