TD Canada Trust Amadon
Novacom Construction Ltd. REVIEWED REVIEWED AS NOTED REVISE AND RE-SUBMIT Reviewed for general conformance with design requirements only. Sole responsibility for correct design, details and dimensions shall remain with the party submitting the drawing.
Kyle Paisley
June 6,016
PER: ______________________ DATE: ____________________
TD Canada Trust Amadon North Vancouver, BC All accessories to be ordered per specifications on the M-500
Prepared for:
Submittal Date: June 2, 2016
L-1
MURRO™ UNIVERSAL DESIGN WALL-HUNG SINK WITH EVERCLEAN
BARRIER FREE
VITREOUS CHINA
MURRO™ UNIVERSAL DESIGN WALL-HUNG SINK WITH EVERCLEAN • Vitreous chinawith EverClean • Available with rear and sealed overflow • Recessed self-draining deck • For concealed arm or wall support • Concealed arm support (by others) • Shown with optional shroud/knee contact guard 0059 020EC available
❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏
❏
0954 004EC (Illustrated) Faucet holes on 102mm (4”) Centres 0954 123EC Extra RH Hole Faucet holes on 102mm (4”) Centres 0954 121EC Extra LH Hole Faucet holes on 102mm (4”) Centres 0954 904EC Less Overflow Faucet holes on 102mm (4”) Centres 0958 008EC Faucet holes on 203mm (8”) Centres 0958 908EC Less Overflow Faucet holes on 203mm (8”) Centres 0955 001EC Centre hole only 0955 123EC CHO with extra RH Hole 0955 121EC CHO with extra LH Hole 0955 901EC CHO Less Overflow Nominal Dimensions: 520mm (20-1/2") deep, 540mm (21-1/4") wide Bowl sizes: 394mm (15-1/2") wide, 343mm (13-1/2") front to back, 127mm (5") deep 0059 020EC Shroud/Knee Contact Guard (Must be specified separately)
FINISHED WALL
* See faucet section for additional models available
102mm (4) 102mm (4) 197mm (7-3/4) 152mm (6)
83mm (3-1/4)
(4) 25mm (1") DIA. ACCESS HOLES FOR CONC. ARMS
(2) 16mm (5/8") DIA. ACCESS HOLES FOR CONC. ARMS
(2) 16mm (5/8") DIA. ACCESS HOLES FOR CONC. ARMS
165mm 406mm (6-1/2) (16) REF. 267mm (10-1/2)
C/L OF 1-1/4 O.D. WASTE
C/L OF 16mm X 29mm (5/8 X 1-1/8) ANCHOR SLOTS
425mm (16-3/4)
■ 127mm
44mm (1-3/4)
■ 216mm (8-1/2)
25mm (1) (1-5/8) ■146mm (5-3/4) 216mm (8-1/2)
▼133mm (5-1/4)
13mm(1/2) DIA. ANCHOR SCREW HOLES 89mm (3-1/2) 1-1/4 O.D. TAILPIECE
FINISHED WALL
■ 41mm
(5)
102mm (4)
520mm (20-1/2)
102mm (4)
C/L OF 54mm(2-1/8 DIA.) HOLES FOR CONCEALED ARMS
Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixtures • cUPC/CSA B45.1-2008 • 1995 National Building Code, section 3.7 and CAN/CSA-B651-M90 and OBC 3.7. To Be Specified ❏ Colour: ❏ Optional Shroud/Knee Contact guard: 0059 020EC ❏ Faucet* and Faucet Finish: ❏ Supplies & Trap 1-1/4": ❏ Concealed Arm Support Carrier (by others)
C/L OF (2) 13mm(1/2) DIA. KNEE CONTACT GUARD ANCHOR HOLES
*
C/L OF SUPPLIES AS REQUIRED
203mm (8) 260mm (10-1/4)
743mm (29-1/4) 710mm 254mm (28) (10) REF. IN 864mm ONTARIO (34) IN ONTARIO SIDE PROFILE 838mm (ADA) (33)
FINISHED FLOOR
NOTES:
● Top of front rim mounted 864mm (34") maximum from finished floor. MEETS THE AMERICAN DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR PEOPLE WITH DISABILITIES
For Universal Design Options, top of rim may be mounted at 813mm (32”) from finished floor to meet ADA and ANSI A117.1 requirements. A 864mm (34”) mounting height is required for California Title 24 and other more stringent knee space requirements. A 838mm (33”) mounting height is required for Ontario. Check local codes. Revised 08/12
540mm (21-1/4)
KEY ANGLE STOPS, LESS WALL ESCUTCHEONS. SUPPLIES REQUIRED. * LOOSE SHROUD/KNEE CONTACT GUARD 0059 020EC NOT INCLUDED AND MUST BE ORDERED SEPARATELY. ■ SUITABLE FOR REINFORCEMENT ONLY, ACTUAL DIMENSIONS MUST BE TAKEN FROM FIXTURE. DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE SUGGESTED. FAUCETS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
IMPORTANT:
© 2012 American Standard ULC
COM-009
AquaSense® TAG
Z6915-XL-GEN Lavatory Faucet with Hydroelectric Generator
Flow Control Options
Accessories
-J 1.5 gpm/ 5.7 Lpm Vandal-Resistant Laminar Flow -K 1.0 gpm/ 3.8 Lpm Vandal-Resistant Laminar Flow -L 1.0 gpm/ 3.8 Lpm Vandal-Resistant Aerator
-DSA
Engineering Specification ADA compliant, chrome plated sensor faucet for retrofit and new construction. Flow Rate 1.5 gpm Vandal Resistant Aerator (0.25 gal per 10 sec. cycle) Occupant Detection Infrared convergence-type proximity sensor Thirty Second Time out feature Spout module Chrome Plated Cast Brass Also Includes Integral 4": cover plate In-line filter Inlet for a 1/2"[13] ball riser
-MT -MV -SH -SSH -TMV -TMV-1 -_____
Drug Screening Applications (Hardwired Applications) Mixing Tee Temperature Mixing Valve Supply Hoses for Mixing Valve Single Stainless Supply Hose (-XL) Thermostatic Mixing Valve for Multiple Faucets Thermostatic Mixing Valve for Single Faucets Other
Zurn Lead Compliant products (-XL) are manufactured to comply with state laws and local codes that mandate lead content levels less than one quarter of one percent (0.25%) total lead content by weighted average.
Architectural/Engineering Approval ZURN INDUSTRIES, LLC. ♦ COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE ♦ SANFORD NC 27330 Phone: 1-800-997-3876 ♦ Fax: 919-775-3541 www.zurn.com In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive ♦ Mississauga, Ontario L4V1L2 Phone: 905-405-8272 Fax: 905-405-1292
AquaSense® is a registered trademark of Zurn Industries, LLC.
The information contained in this document is subject to change without notice. Please contact Zurn for most up to date information.
Rev. B Dwg. No. 309888
Date: 6/24/2014 Product No. Z6915-XL-GEN
_______________
SEMI-CAST P-TRAPS WITH WALL BEND Z8700-PC TO Z8708-PC TAG _______ Engineering Specification: Zurn Z8700-PC to Z8708-PC. – Chrome-plated cast brass (copper alloy) body P-trap with cleanout, tubular brass wall bend as specified, die-cast nuts, and shallow escutcheon with compression inlet.
Note: All dimensions are for reference only. Do not use for pre-plumbing.
PRODUCT NUMBER Z8700-PC Z8700-8-PC Z8700-15-PC Z8701-PC Z8701-9-PC Z8701-15-PC Z8702-PC* Z8702-9-PC* Z8702-15-PC* Z8703B-PC** Z8704B-PC** Z8706-PC Z8707-PC Z8708-PC*
A INLET in[mm] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/2[38] 1 1/2[38] 1 1/2[38] 1 1/2[38] 2[51] 1 1/4[32] 1 1/4[32] 1 1/2[38]
B OUTLET in[mm] GAUGE 1 1/4[32] 17 1 1/4[32] 17 1 1/4[32] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 2[51] 17 2[51] 17 1 1/4[32] 20 1 1/2[38] 20 1 1/2[38] 20
DIMENSIONS MASTER WEIGHT C in[mm] D in[mm] E in[mm] CARTON CARTON [lbs] 10[254] 2 1/2[64] 7 1/2[191] 12 24 11[279] 2 1/2[64] 8 1/2[216] 12 24 15[381] 2 1/2[64] 12 1/2[318] 18 40 10 1/2[267] 3[76] 7 1/2[191] 12 24 12[305] 3[76] 9[229] 12 24 15[381] 3[76] 12[305] 18 42 10 1/2[267] 3[76] 7 1/2[191] 12 24 12[305] 3[76] 9[229] 12 24 15[381] 3[76] 12[305] 18 42 12 1/2[318] 3 1/2[89] 9[229] 6 18 12 1/2[318] 3 1/2[89] 9[229] 6 18 10[254] 2 1/2[64] 7 1/2[191] 12 24 10 1/2[267] 3[76] 7 1/2[191] 12 24 10 1/2[267] 3[76] 7 1/2[191] 12 24
OPTIONAL ACCESSORIES Suffix Description ✔ ____ -B Brass Nuts ____ -BX Box Escutcheon ____ -CE Cast Brass Escutcheon with Setscrew ✔ ____ -D Deep Escutcheon (Note = not available for Z8703B-PC and Z8704B-PC) ____ -J Metal to Metal Ground Joint Connection ____ -WC Waste Connections - Compression ____ -15 15[381] C Dim. 1 1/4[32] and 1 1/2[38] Only ____ -18 18[457] C Dim. 1 1/4[32] and 1 1/2[38] Only * COMES WITH OPTIONAL 1-1/2" x 1-1/4" REDUCTION POLY-WASHER FOR INLET ** SHIPPED WITH BRASS NUTS UNLESS OTHERWISE SPECIFIED ZURN INDUSTRIES, LLC ♦ COMMERCIAL BRASS OPERATION ♦ 2640 SOUTH WORK STREET ♦ FALCONER NY 14733 Phone: 1-800-997-3876 ♦ Fax: 1-919-775-3541 ♦ www.zurn.com In Canada: ZURN INDUSTRIES LIMITED ♦ 3544 Nashua Drive ♦ Mississauga, Ontario L4V1L2 ♦ Phone: 905/405-8272 Fax: 905/405-1292 AquaSpec® is a registered trademark of Zurn Industries, LLC ©2011 Zurn Industries, LLC
Rev. K Date: 5/10/11 C.N. No. 127641 Dwg. No. 60111 Product No. Z8700-PC to Z8708-PC
____________________
STANDARD STOP WITH FLEXIBLE LAVATORY SUPPLY Z8800-XL-LR-PC TO Z8809-XL-LRLK-PC TAG _______
Engineering Specification: Zurn Z8800-XL-LR-PC to Z8809-XL-LRLK-PC Two Zurn chrome plated, solid brass angle stops with round wheel handles or loose key as specified, two 12"[305mm] flexible chrome plated copper lavatory risers complete with two chrome plated steel flanges. Z8808-XL-LR-PC to Z8809-XL-LRLK-PC include 5"[127mm] chrome plated copper extension tubes and deep bell steel flanges. Zurn Lead Compliant* “XL” products are a line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn “XL” products are manufactured with *not more than 0.25% lead content when used with respect to wetted surfaces of pipes and pipe fittings, plumbing fitting and fixtures: California Health & Safety Code § 116875; Vermont 9 VCA § 2470h.
PRODUCT NUMBER
Z8800 thru Z8803
Z8804 thru Z8805
EXT.
Z8800-XL-LR-PC
3/8 [10] IPS x 3/8 [10] OD
-
25
Z8800-XL-LRLK-PC
3/8 [10] IPS x 3/8 [10] OD
-
25
Z8802-XL-LR-PC
1/2 [13] IPS x 3/8 [10]OD
-
25
Z8802-XL-LRLK-PC
1/2 [13] IPS x 3/8 [10] OD
-
25
Z8803-XL-LR-PC
1/2 [13] IPS x 1/2 [13] OD
-
25
Z8803-XL-LRLK-PC
1/2 [13] IPS x 1/2 [13] OD
-
25
Z8804-XL-LR-PC
1/2 [13] NOM x 3/8 [10] OD
-
25
Z8804-XL-LRLK-PC 1/2 [13] NOM x 3/8 [10] OD
-
25
Z8805-XL-LR-PC
1/2 [13] NOM x 1/2 [13] OD
-
25
Z8805-XL-LRLK-PC 1/2 [13] NOM x 1/2 [13] OD
-
25
Z8806-XL-LR-PC
1/2 [13] SWT x 3/8 [10] OD
-
25
Z8806-XL-LRLK-PC 1/2 [13] SWT x 3/8 [10] OD
-
25
Z8807-XL-LR-PC
1/2 [13] SWT x 1/2 [13] OD
-
25
Z8807-XL-LRLK-PC 1/2 [13] SWT x 1/2 [13] OD
-
25
Z8808-XL-LR-PC
Z8806 thru Z8807
Z8808 thru Z8809
MASTER WEIGHT CARTON CARTON LR LRLK
CONNECTIONS
1/2 [13] SWT x 3/8 [10] OD
5
25
Z8808-XL-LRLK-PC 1/2 [13] SWT x 3/8 [10] OD
5
25
Z8809-XL-LR-PC
5
25
5
25
1/2[13] SWT x1/2[13] OD
Z8809-XL-LRLK-PC 1/2 [13] SWT x 1/2 [13] OD
SUFFIXES -A Single supply option -C1 Standard Line Lock Shield Cap -CE Chrome Plated, Cast Brass, Flange with setscrew -D Chrome Plated Steel, Deep Bell Flange (Bell Type) -XP Cross Handle
24 25 24 25 24 25 24 25 24 25 24 25 24 25 28 33 28 33
*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
-3 -5 -15 -20 -30 -36
3[76] Nipple 5[127] Nipple 15[381] Supply Tube 20[508] Supply Tube 30[762] Supply Tube 36[914] Supply Tube
ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC 27330 Phone: 1-800-997-3876 Fax: 919-775-3541 World Wide Web: www.zurn.com In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905-405-8272 Fax: 905-405-1292 AquaSpec® is a registered trademark of Zurn Industries, LLC ©2009 Zurn Industries, LLC
Rev. B Dwg. No. 93347
Date: 8/8/13 Product No. Z8800-XL-LR-PC to Z8809-XL-LRLK-PC
WC - LEFT
CADET RIGHT HEIGHT™ ELONGATED PRESSURE-ASSISTED 6L TOILET
BARRIER FREE
VITREOUS CHINA
CADET RIGHT HEIGHT™ ELONGATED PRESSURE-ASSISTED 6L TOILET
❏
2467 016 • Vitreous china • Low-consumption (6.0 Lpf/1.3 gpf) • EverClean® surface inhibits the growth of stainand odor-causing bacteria, mold, and mildew on the surface • Elongated 16-1/2" (419mm) high bowl rim for accessible applications • Pressure-assisted siphon jet flush action • Fully-glazed 2-1/8” (54mm) trapway) ball pass • Generous 10 x 12” (254x305mm) water surface area • Close-coupled Flushometer tank* • Metal chrome trip lever • Speed Connect™ tank/bowl coupling system • Sanitary dam on bowl • 2 bolt caps • 100% factory flush tested FINISHED WALL • 12" (305mm) Rough-in Separate Component Parts:
❏
3483 001 Elongated 16-1/2" (419mm) high Universal Bowl with 2 bolt caps ❏ 4142 016 Flushometer tank complete with coupling components Nominal Dimensions: 768 x 521 x 781mm (30-1/4" x 20-1/2" x 30-3/4")
1 (27mm)
30-1/4 (768mm)
20-1/2 (521mm)
9 (226mm) 18-1/2 (470mm)
C/L OF SEAT POST HOLES 5-1/2 (140mm CENTRES)
3 (76mm)
Recommended static pressure range 25 psi - 80 psi
Alternate Configurations Available: 4142 600 Tank with tank cover locking device 4142 800 Tank with right hand trip lever 4142 900 Tank complete with right hand trip lever and tank cover locking device
❏ ❏ ❏
16-1/2 (419mm)
❑ Colour: ❑ White
❑ Bone
❑ Linen
❑ Black
❑ Seat: American Standard #5324 019 "Rise and Shine" (with easy to clean lift-off hinge system) solid plastic closed, elongated front seat with cover. See price page.
* 10 (254mm)
5/8 (16mm)
13-3/4 (347mm)
6 (152mm) 12 (305mm)
Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2-2008 / CSA B45.1-08 for Vitreous China Fixtures To Be Specified
30-3/4 (781mm)
SUPPLY AS REQ'D
Fixture only, seat and supply by others
*6 (152mm) FINISHED FLOOR
14 (356mm)
9-1/2 (238mm)
C/L OF OUTLET
NOTES: THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305mm (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS SUPPLIED. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*
❑ Seat: #5321 110 EverClean® Elongated Seat with Slow Close Snap-Off Hinges
❑ Alternate Seat: ❑ Supply with stop:
When installed so top of seat is 432 to 483mm (17" to 19") from the finished floor.
MEETS THE AMERICAN DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USEABLE BUILDING FACILITIESCHECK LOCAL CODES.
* Flushometer tank system by Flushmate® Div. of Sloan Valve Co.
07/10
TOI-223 © 2010 American Standard
COMMERCIAL EXTRA HEAVY-DUTY PLASTIC TOILET SEAT MODEL #
COLOR #
1655CT/1655SSCT _______ DESCRIPTION: Open front less cover, elongated, extra heavy-duty, injection molded solid plastic toilet seat. Features four molded-in bumpers, non self-sustaining (1655CT) or self-sustaining (1655SSCT) check hinges with non-corrosive 300 Series stainless steel posts and pintles and STA-TITE Commercial Fastening System™. This seat complies with IAPMO/ANSI Z124.5-2013 Plastic Toilet Seats as a class Commercial Heavy Duty. ®
SPECIFICATIONS: Size:
Elongated
Material:
Plastic
Style:
Open Front less Cover
Bumpers:
Four
Hinges:
Plastic Non Self-Sustaining (1655CT) or SelfSustaining (1655SSCT) with 300 Series Stainless Steel Posts and Pintles
Fastening System:
STA-TITE Commercial Fastening System™ ®
FEATURES: STA-TITE Commercial Fastening System™ ®
Non-Corrosive 300 Series Stainless Steel Posts and Pintles PLASTIC HINGES WITH STAINLESS STEEL POSTS AND PINTLES
STA-TITE® COMMERCIAL FASTENING SYSTEM™
DIMENSIONS:
5-1/2"
18-3/4"
7-5/8"
3-3/16" 14-5/16"
2-5/8"
18-3/8"
1" 1-1/4"
Proudly Made in the USA
Bemis Manufacturing Co., Sheboygan Falls, WI 53085 www.ToiletSeats.com
Phone: 800-558-7651 Fax: 800-292-3647 ©2014 0B7012285 REV C
STANDARD STOP W/ FLEXIBLE CLOSET SUPPLY Z8800CR-PC TO Z8809CRLK-PC TAG _______ Engineering Specification: Zurn Z8800CR-PC TO Z8809CRLK-PC One Zurn chrome plated, solid brass angle stop with round wheel handle or loose key as specified, one 12[305] flexible chrome plated copper closet riser complete with one chrome plated steel flange. Z8808CR-PC and Z8809CR-PC include one 5[127] chrome plated copper extension tube with deep bell steel flange.
Z8800 THRU Z8803 PRODUCT NUMBER Z8800CR-PC Z8800CRLK-PC Z8801CR-PC Z8801CRLK-PC Z8802CR-PC Z8802CRLK-PC Z8803CR-PC Z8803CRLK-PC Z8804CR-PC Z8804CRLK-PC Z8805CR-PC Z8805CRLK-PC Z8806CR-PC Z8806CRLK-PC Z8807CR-PC Z8807CRLK-PC Z8808CR-PC Z8808CRLK-PC Z8809CR-PC Z8809CRLK-PC SUFFIXES ____ - C1 ____ - CE ____ - D ____ - WD ____ - XP ____ - 3 ____ - 5 ____ - 15 ____ - 20
Z8804 THRU Z8805
Z8806 THRU Z8807
CONNECTIONS
EXT.
MASTER CARTON
3/8 [10] IPS x 3/8 [10] OD 3/8 [10] IPS x 3/8 [10] OD 3/8 [10] IPS x 1/2 [13] OD 3/8 [10] IPS x 1/2 [13] OD 1/2 [13] IPS x 3/8 [10] OD 1/2 [13] IPS x 3/8 [10] OD 1/2 [13] IPS x 1/2 [13] OD 1/2 [13] IPS x 1/2 [13] OD 1/2 [13] NOM x 3/8 [10] OD 1/2 [13] NOM x 3/8 [10] OD 1/2 [13] NOM x 1/2 [13] OD 1/2 [13] NOM x 1/2 [13] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 1/2 [13] OD 1/2 [13] SWT x 1/2 [13] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 1/2 [13] OD 1/2 [13] SWT x 1/2 [13] OD
– – – – – – – – – – – – – – – – 5 5 5 5
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
Z8808 THRU ZH8809 WEIGHT CARTON CR CRLK 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 16 18 16 18
Standard Line Lock Shield Cap Chrome Plated, Cast Brass, Flange with setscrew Chrome Plated Steel, Deep Bell Flange (Bell Type) Wrought Brass, Deep Flange, (Bell Type) Cross Handle 3[76] Nipple 5[127] Nipple 15[381] Supply Tube 20[508] Supply Tube
ZURN INDUSTRIES, LLC ♦ COMMERCIAL BRASS OPERATION ♦ 2640 SOUTH WORK STREET ♦ FALCONER NY 14733 Phone: 1-716-665-1132 ♦ Fax: 1-716-665-1135 ♦ World Wide Web: www.zurn.com In Canada: ZURN INDUSTRIES LIMITED ♦ 3544 Nashua Drive ♦ Mississauga, Ontario L4V1L2 ♦ Phone: 905/405-8272 Fax: 905/405-1292 AquaSpec® is a registered trademark of Zurn Industries, LLC ©2008 Zurn Industries, LLC
Rev. D Date: 1/19/09 C.N. No. 108226 Dwg. No. 60974 Product No. Z8800CR-PC TO Z8809CRLK-PC
WC - RIGHT
CADET FloWise™ RIGHT HEIGHT™ ELONGATED PRESSURE-ASSISTED TOILET 1.1 gpf / 4.2 Lpf VITREOUS CHINA
BARRIER FREE
CADET FloWise™ RIGHT HEIGHT™ ELONGATED PRESSURE-ASSISTED TOILET 1.1 gpf/ 4.2 Lpf
❏ 2467.100
• Vitreous china • High Efficiency, Ultra Low-consumption (1.1 gpf/4.2 Lpf) • EverClean® surface inhibits the growth of stain and odor-causing bacteria, mold, and mildew on the surface • Meets EPA WaterSense® criteria • Bowl rim at 16-1/2" for accessible applications • Elongated bowl • Pressure-assisted siphon jet flush action • Fully-glazed 2-1/8" trapway • 10 x 12" water surface area • Close-coupled Flushometer tank* • Metal chrome trip lever • Speed Connect ® tank/bowl coupling system • Sanitary dam on bowl • Two bolt caps • 100% factory flush tested • 12" Rough-in
❏ 2467.136 Same as above except with slotted
FINISHED WALL
rim bowl for bed pan holding (White only) ❏ 3483.100 Bowl with two bolt caps ❏ 3483.001 Same as above, Universal Bowl ❏ 3484.001 Bowl with slotted rim for bed pan holding with two bolt caps (White only) ❏ 4142.100 Tank complete with coupling components
1" (27mm)
Alternate Configurations Available: ❏ 4142.601 Tank and tank cover only with tank cover locking device ❏ 4142.801 Tank and tank cover only with right hand trip lever ❏ 4142.901 Tank complete with right hand trip lever and tank cover locking device Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2-2008 / CSA B45.1-08 for Vitreous China Fixtures • US EPA WaterSense® Specification for HET's
9" (226mm)
C/L OF SEAT POST HOLES 5-1/2" (140mm CENTERS) 30-3/4" (781mm)
3" (76mm)
SUPPLY AS REQ'D 16-1/2" (419mm)
* 10" (254mm)
5/8" (16mm)
13-3/4" (347mm)
6" (150mm) 12" (305mm)
* 6" (152mm) FINISHED FLOOR
14" (356mm)
9-1/2" (238mm)
C/L OF OUTLET
NOTES: THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305mm (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. * DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME A112.19.2-2008 / CSH B45.1-08. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black ❏ Seat: American Standard #5324.019 “Rise and Shine” (with easy to clean lift-off hinge system) solid plastic closed front seat with cover. ❏ American Standard #5321.110 EverClean ® seat with Slow Close snap-off hinges. ❏ Alternate Seat: ❏ Supply with Stop: © 2010 AS America Inc.
20-1/2" (516mm)
18-1/2" (470mm)
Nominal Dimensions: 768 x 521 x 781mm (30-1/4" x 20-1/2" x 30-3/4") Fixture only, seat and supply by others Recommended working pressure range 25 psi - 80 psi
30-1/4" (768mm)
Certified by
IAPMO R&T
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES - CHECK LOCAL CODES.
M51
When installed so top of seat is 432 to 483mm (17" to 19") from the finished floor.
Revised 2/10
COMMERCIAL EXTRA HEAVY-DUTY PLASTIC TOILET SEAT MODEL #
COLOR #
1655CT/1655SSCT _______ DESCRIPTION: Open front less cover, elongated, extra heavy-duty, injection molded solid plastic toilet seat. Features four molded-in bumpers, non self-sustaining (1655CT) or self-sustaining (1655SSCT) check hinges with non-corrosive 300 Series stainless steel posts and pintles and STA-TITE Commercial Fastening System™. This seat complies with IAPMO/ANSI Z124.5-2013 Plastic Toilet Seats as a class Commercial Heavy Duty. ®
SPECIFICATIONS: Size:
Elongated
Material:
Plastic
Style:
Open Front less Cover
Bumpers:
Four
Hinges:
Plastic Non Self-Sustaining (1655CT) or SelfSustaining (1655SSCT) with 300 Series Stainless Steel Posts and Pintles
Fastening System:
STA-TITE Commercial Fastening System™ ®
FEATURES: STA-TITE Commercial Fastening System™ ®
Non-Corrosive 300 Series Stainless Steel Posts and Pintles PLASTIC HINGES WITH STAINLESS STEEL POSTS AND PINTLES
STA-TITE® COMMERCIAL FASTENING SYSTEM™
DIMENSIONS:
5-1/2"
18-3/4"
7-5/8"
3-3/16" 14-5/16"
2-5/8"
18-3/8"
1" 1-1/4"
Proudly Made in the USA
Bemis Manufacturing Co., Sheboygan Falls, WI 53085 www.ToiletSeats.com
Phone: 800-558-7651 Fax: 800-292-3647 ©2014 0B7012285 REV C
STANDARD STOP W/ FLEXIBLE CLOSET SUPPLY Z8800CR-PC TO Z8809CRLK-PC TAG _______ Engineering Specification: Zurn Z8800CR-PC TO Z8809CRLK-PC One Zurn chrome plated, solid brass angle stop with round wheel handle or loose key as specified, one 12[305] flexible chrome plated copper closet riser complete with one chrome plated steel flange. Z8808CR-PC and Z8809CR-PC include one 5[127] chrome plated copper extension tube with deep bell steel flange.
Z8800 THRU Z8803 PRODUCT NUMBER Z8800CR-PC Z8800CRLK-PC Z8801CR-PC Z8801CRLK-PC Z8802CR-PC Z8802CRLK-PC Z8803CR-PC Z8803CRLK-PC Z8804CR-PC Z8804CRLK-PC Z8805CR-PC Z8805CRLK-PC Z8806CR-PC Z8806CRLK-PC Z8807CR-PC Z8807CRLK-PC Z8808CR-PC Z8808CRLK-PC Z8809CR-PC Z8809CRLK-PC SUFFIXES ____ - C1 ____ - CE ____ - D ____ - WD ____ - XP ____ - 3 ____ - 5 ____ - 15 ____ - 20
Z8804 THRU Z8805
Z8806 THRU Z8807
CONNECTIONS
EXT.
MASTER CARTON
3/8 [10] IPS x 3/8 [10] OD 3/8 [10] IPS x 3/8 [10] OD 3/8 [10] IPS x 1/2 [13] OD 3/8 [10] IPS x 1/2 [13] OD 1/2 [13] IPS x 3/8 [10] OD 1/2 [13] IPS x 3/8 [10] OD 1/2 [13] IPS x 1/2 [13] OD 1/2 [13] IPS x 1/2 [13] OD 1/2 [13] NOM x 3/8 [10] OD 1/2 [13] NOM x 3/8 [10] OD 1/2 [13] NOM x 1/2 [13] OD 1/2 [13] NOM x 1/2 [13] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 1/2 [13] OD 1/2 [13] SWT x 1/2 [13] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 1/2 [13] OD 1/2 [13] SWT x 1/2 [13] OD
– – – – – – – – – – – – – – – – 5 5 5 5
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
Z8808 THRU ZH8809 WEIGHT CARTON CR CRLK 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 16 18 16 18
Standard Line Lock Shield Cap Chrome Plated, Cast Brass, Flange with setscrew Chrome Plated Steel, Deep Bell Flange (Bell Type) Wrought Brass, Deep Flange, (Bell Type) Cross Handle 3[76] Nipple 5[127] Nipple 15[381] Supply Tube 20[508] Supply Tube
ZURN INDUSTRIES, LLC ♦ COMMERCIAL BRASS OPERATION ♦ 2640 SOUTH WORK STREET ♦ FALCONER NY 14733 Phone: 1-716-665-1132 ♦ Fax: 1-716-665-1135 ♦ World Wide Web: www.zurn.com In Canada: ZURN INDUSTRIES LIMITED ♦ 3544 Nashua Drive ♦ Mississauga, Ontario L4V1L2 ♦ Phone: 905/405-8272 Fax: 905/405-1292 AquaSpec® is a registered trademark of Zurn Industries, LLC ©2008 Zurn Industries, LLC
Rev. D Date: 1/19/09 C.N. No. 108226 Dwg. No. 60974 Product No. Z8800CR-PC TO Z8809CRLK-PC
SK-1
DROP IN SINK: ALBS4605P-1 ALBS4605P-1 | 2000101747
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2 mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.408. Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location. Includes 3 1/2" (89 mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece. Model Options: MECH ALBS4605P-1/1, 1 faucet hole, 1 1/2" diameter ALBS4605P-1/3, 3 faucet holes, 1 1/2" diameter, 4" centers, 8" centerset ALBS4605P-1, Custom (non-returnable)
to confirm
TECHNICAL DATA type of basin
Single Compartment
PROJECT INFORMATION
bowl depth
5''
Item Location
Bowl finish
satin finished
Bowl front to back
14''
Bowl left to right
16''
Number
gross weight
4.24 kg
Quote Number
material
stainless steel
Notes
material code
1.4301 Chrome Nickel steel V2A
material thickness grade
18 gauge (1.2 mm)
Overall front to back
18 13/16''
Overall left to right
18 1/8''
overflow
no
faucet ledge
yes
type of mounting
drop in
type of waste kit
3 1/2" crumb cup strainer
Project
Engineer’s Approval
Franke Commercial Systems | [email protected] | www.franke-commercial.com | 2016-06-02
undercoated
yes
waste hole position
centre
net weight
3.10 kg
Franke Commercial Systems | [email protected] | www.franke-commercial.com | 2016-06-02
_______________
SEMI-CAST P-TRAPS WITH WALL BEND Z8700-PC TO Z8708-PC TAG _______ Engineering Specification: Zurn Z8700-PC to Z8708-PC. – Chrome-plated cast brass (copper alloy) body P-trap with cleanout, tubular brass wall bend as specified, die-cast nuts, and shallow escutcheon with compression inlet.
Note: All dimensions are for reference only. Do not use for pre-plumbing.
PRODUCT NUMBER Z8700-PC Z8700-8-PC Z8700-15-PC Z8701-PC Z8701-9-PC Z8701-15-PC Z8702-PC* Z8702-9-PC* Z8702-15-PC* Z8703B-PC** Z8704B-PC** Z8706-PC Z8707-PC Z8708-PC*
A INLET in[mm] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/2[38] 1 1/2[38] 1 1/2[38] 1 1/2[38] 2[51] 1 1/4[32] 1 1/4[32] 1 1/2[38]
B OUTLET in[mm] GAUGE 1 1/4[32] 17 1 1/4[32] 17 1 1/4[32] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 2[51] 17 2[51] 17 1 1/4[32] 20 1 1/2[38] 20 1 1/2[38] 20
DIMENSIONS MASTER WEIGHT C in[mm] D in[mm] E in[mm] CARTON CARTON [lbs] 10[254] 2 1/2[64] 7 1/2[191] 12 24 11[279] 2 1/2[64] 8 1/2[216] 12 24 15[381] 2 1/2[64] 12 1/2[318] 18 40 10 1/2[267] 3[76] 7 1/2[191] 12 24 12[305] 3[76] 9[229] 12 24 15[381] 3[76] 12[305] 18 42 10 1/2[267] 3[76] 7 1/2[191] 12 24 12[305] 3[76] 9[229] 12 24 15[381] 3[76] 12[305] 18 42 12 1/2[318] 3 1/2[89] 9[229] 6 18 12 1/2[318] 3 1/2[89] 9[229] 6 18 10[254] 2 1/2[64] 7 1/2[191] 12 24 10 1/2[267] 3[76] 7 1/2[191] 12 24 10 1/2[267] 3[76] 7 1/2[191] 12 24
OPTIONAL ACCESSORIES Suffix Description ____ -B Brass Nuts ____ -BX Box Escutcheon ____ -CE Cast Brass Escutcheon with Setscrew ____ -D Deep Escutcheon (Note = not available for Z8703B-PC and Z8704B-PC) ____ -J Metal to Metal Ground Joint Connection ____ -WC Waste Connections - Compression ____ -15 15[381] C Dim. 1 1/4[32] and 1 1/2[38] Only ____ -18 18[457] C Dim. 1 1/4[32] and 1 1/2[38] Only * COMES WITH OPTIONAL 1-1/2" x 1-1/4" REDUCTION POLY-WASHER FOR INLET ** SHIPPED WITH BRASS NUTS UNLESS OTHERWISE SPECIFIED ZURN INDUSTRIES, LLC ♦ COMMERCIAL BRASS OPERATION ♦ 2640 SOUTH WORK STREET ♦ FALCONER NY 14733 Phone: 1-800-997-3876 ♦ Fax: 1-919-775-3541 ♦ www.zurn.com In Canada: ZURN INDUSTRIES LIMITED ♦ 3544 Nashua Drive ♦ Mississauga, Ontario L4V1L2 ♦ Phone: 905/405-8272 Fax: 905/405-1292 AquaSpec® is a registered trademark of Zurn Industries, LLC ©2011 Zurn Industries, LLC
Rev. K Date: 5/10/11 C.N. No. 127641 Dwg. No. 60111 Product No. Z8700-PC to Z8708-PC
____________________
STANDARD STOP WITH FLEXIBLE LAVATORY SUPPLY Z8800-XL-LR-PC TO Z8809-XL-LRLK-PC TAG _______
Engineering Specification: Zurn Z8800-XL-LR-PC to Z8809-XL-LRLK-PC Two Zurn chrome plated, solid brass angle stops with round wheel handles or loose key as specified, two 12"[305mm] flexible chrome plated copper lavatory risers complete with two chrome plated steel flanges. Z8808-XL-LR-PC to Z8809-XL-LRLK-PC include 5"[127mm] chrome plated copper extension tubes and deep bell steel flanges. Zurn Lead Compliant* “XL” products are a line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn “XL” products are manufactured with *not more than 0.25% lead content when used with respect to wetted surfaces of pipes and pipe fittings, plumbing fitting and fixtures: California Health & Safety Code § 116875; Vermont 9 VCA § 2470h.
PRODUCT NUMBER
Z8800 thru Z8803
Z8804 thru Z8805
EXT.
Z8800-XL-LR-PC
3/8 [10] IPS x 3/8 [10] OD
-
25
Z8800-XL-LRLK-PC
3/8 [10] IPS x 3/8 [10] OD
-
25
Z8802-XL-LR-PC
1/2 [13] IPS x 3/8 [10]OD
-
25
Z8802-XL-LRLK-PC
1/2 [13] IPS x 3/8 [10] OD
-
25
Z8803-XL-LR-PC
1/2 [13] IPS x 1/2 [13] OD
-
25
Z8803-XL-LRLK-PC
1/2 [13] IPS x 1/2 [13] OD
-
25
Z8804-XL-LR-PC
1/2 [13] NOM x 3/8 [10] OD
-
25
Z8804-XL-LRLK-PC 1/2 [13] NOM x 3/8 [10] OD
-
25
Z8805-XL-LR-PC
1/2 [13] NOM x 1/2 [13] OD
-
25
Z8805-XL-LRLK-PC 1/2 [13] NOM x 1/2 [13] OD
-
25
Z8806-XL-LR-PC
1/2 [13] SWT x 3/8 [10] OD
-
25
Z8806-XL-LRLK-PC 1/2 [13] SWT x 3/8 [10] OD
-
25
Z8807-XL-LR-PC
1/2 [13] SWT x 1/2 [13] OD
-
25
Z8807-XL-LRLK-PC 1/2 [13] SWT x 1/2 [13] OD
-
25
Z8808-XL-LR-PC
Z8806 thru Z8807
Z8808 thru Z8809
MASTER WEIGHT CARTON CARTON LR LRLK
CONNECTIONS
1/2 [13] SWT x 3/8 [10] OD
5
25
Z8808-XL-LRLK-PC 1/2 [13] SWT x 3/8 [10] OD
5
25
Z8809-XL-LR-PC
5
25
5
25
1/2[13] SWT x1/2[13] OD
Z8809-XL-LRLK-PC 1/2 [13] SWT x 1/2 [13] OD
SUFFIXES -A Single supply option -C1 Standard Line Lock Shield Cap -CE Chrome Plated, Cast Brass, Flange with setscrew -D Chrome Plated Steel, Deep Bell Flange (Bell Type) -XP Cross Handle
24 25 24 25 24 25 24 25 24 25 24 25 24 25 28 33 28 33
*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
-3 -5 -15 -20 -30 -36
3[76] Nipple 5[127] Nipple 15[381] Supply Tube 20[508] Supply Tube 30[762] Supply Tube 36[914] Supply Tube
ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC 27330 Phone: 1-800-997-3876 Fax: 919-775-3541 World Wide Web: www.zurn.com In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905-405-8272 Fax: 905-405-1292 AquaSpec® is a registered trademark of Zurn Industries, LLC ©2009 Zurn Industries, LLC
Rev. B Dwg. No. 93347
Date: 8/8/13 Product No. Z8800-XL-LR-PC to Z8809-XL-LRLK-PC
Lav Guard2 Sbmttl 2-07
2/7/07
2:22 PM
Page 1
ADA-compliant undersink protection
Submittal Sheet General Description: LAV GUARD® 2 E-Z Series waste and supply piping covers satisfy ADA compliance requirements. Built-in E-Z Grip internal fasteners and internal, E-Z Tear-To-Fit trimming feature allow for fast installation without tools. Series #100 E-Z kits are designed to fit on all tubular and cast brass P-trap assemblies. Series #400 kits are the “original” LAV GUARD design and fit schedule 40 ABS and PVC P-trap assemblies — regardless of their geometry or rotational offset. Valve cover completely encloses angle valve and supply tube for both handled and keyed type water stops. ____________________________________________ Material Molded vinyl ____________________________________________ Nominal Wall 1/8" constant ____________________________________________ Durometer 70 -80 - Shore A ____________________________________________ UV Protection Will not fade or discolor ____________________________________________ Durability Virtually indestructible ____________________________________________ Internal, E-Z Tear-To-Fit trim feature ____________________________________________
Trimming (E-Z Series)
Internal E-Z Grip fasteners (reusable) ____________________________________________
Fasteners (E-Z Series)
Color China white ____________________________________________ Paintability Apply Latex paint ____________________________________________ Burning Characteristics Self extinguished ASTM D-635 0 sec (ATB) 0 mm (AEB) ____________________________________________ Bacteria/Fungus ASTM G21 and G22/ Resistance Result: 0 growth ____________________________________________ Maintenance Use common detergents ____________________________________________
Shown with Accessory #105 E-Z (fits all standard 5" offset wheelchair strainers). Accessories105 E-Z,106 E-Z, and 107 E-Z can be purchased separately.
Internal ribs add cushioning and thermal resistance
E-Z Grip internal fasteners
Tear-to-fit on internal dimensioned tear lines.
Install over pipes. Press finger recesses to engage internal fasteners. To remove covers, firmly pull seam apart using a strong grip.
10" waste arm cover with internal E-Z Tear-To-Fit trim feature J-bend covers all tubular and cast brass configurations
E-Z Series Shown
Vent hole keeps P-trap dry
#100 E-Z Series (shown above right) for tubular and cast brass P-trap assemblies. #400W * Series (original design) for schedule 40 P-trap assemblies. ■ Model #99 E-Z
One angle valve and supply cover __________________
■ Model #100 E-Z
One P-trap cover _________________
■ Model #400W*
One P-trap cover _________________
■ Model #101 E-Z
One P-trap cover, one angle valve cover _________________ One P-trap cover, one angle valve cover
■ Model #102 E-Z
One P-trap cover, two angle valves and covers ___________________
■ Model #402W*
One P-trap cover, two angle valves and covers ___________________
■ Model #103 E-Z
One P-trap cover, two angle valves and supply covers, one 5" offset tailpiece wheelchair strainer cover ___________________
■ Accessory #105 E-Z
One 5" offset tailpiece wheelchair strainer assembly
*All #400W series items are the “original” LAV GUARD design and ®
construction. Specifications may change without notice.
Accessory 105 E-Z
IPS Corporation, 202 Industrial Park Lane, Collierville, TN 38017 (901) 853-5001 (800) 340-5969 FAX: (901) 853-5008 e-mail: [email protected] Internet: http://www.truebro.com
Vent slots keep valve dry 10" tailpiece cover
E-Z Tear-To-Fit trim grooves
■ Model #401W* Manufactured under one or more of the following U.S. or Canadian patents. Other patents pending. 5,303,730 5,360,031 5,524,669 5,564,463 5,678,598 5,699,828 5,915,412 5,915,413 5,901,739 5,960,820 2,075,324 2,119,427 2,136,027 2,158,083
9" supply tube cover with internal E-Z Tear-To-Fit trim grooves
NOTE: Accessory #105 E-Z is included in #103 E-Z kits.
Accessory 106 E-Z
■ Accessory #105-K Kohler 6" offset
____________________ ■ Accessory #106 E-Z
One basket strainer cover and offset waste cover (adjustable to 18")
____________________ ■ Accessory #107 E-Z
Two basket strainer covers and center or end outlet waste cover (adjustable)
____________________ ■ Accessory #Ex99 E-Z
One 16" extension for water supply
____________________ ■ Accessory #Ex100 E-Z
One 16" extension for drain waste arm or tailpiece
Accessory 107 E-Z (Configuration Options Shown) Center Outlet
End Outlet
________________________________________ Designer _________________________________________ Job/Location
TRUEBRO reserves the right to make product and material changes at any time without notice.
2 / 07
JS-1
M
MSB 2424 MSB 3624
OLDED-STONE® MOP SERVICE BASIN
Molded-Stone® Mop Service Basin
FEATURES • MSB 2424 The MSB 2424 shall have overall outside dimensions of 24” x 24” x 10”. The molding shall be done in matched metal dies under heat and pressure resulting in a one-piece homogeneous product. The unit shall have 10” high walls with not less than 1” wide. The stainless steel drain body is designed to provide for a caulk connection or QDC-3 joint to a 3” drain pipe. A combination dome strainer and lint basket made from stainless steel shall be included with factory installed stainless steel drain body for caulked joint to accept a 3” pipe. • MSB 3624
NOTES
OPTIONS • Service Faucet (830-AA): Chrome plated with vacuum breaker, integral stops, adjustable wall brace, pail hook and 3 ⁄4” hose thread on spout.
The MSB 3624 shall have overall outside dimensions of 36” x 24” x 10”. The molding shall be done in matched metal dies under heat and pressure resulting in a one-piece homogeneous product. The unit shall have 10” high walls with not less than 1” wide shoulders and an integrally molded shelf 10 9⁄16” wide where indicated. The stainless steel drain body is designed to provide for a caulk connection or QDC-3 joint to a 3” drain pipe. A combination dome strainer and lint basket made from stainless steel shall be included with factory installed stainless steel drain body for caulked joint to accept a 3” pipe.
• Hose and Hose Bracket (832-AA) • Mop Hanger (889-CC) • Alternate Strainer (1453-BB) - For residential use (EFS-3624 and EFS-2424) • 3” Quick Drain Connector (QDC-3XH): Neoprene connecting gasket suitable for attaching extra heavy cast iron soil pipe and Schedule 40 steel pipe to the drain body. Neoprene connecting gasket (QDC-3SN) suitable for attaching hubless cast iron pipe (no hub, nominal O.D. of 3.31”) and service weight cast iron soil pipe (nominal O.D. of 3.38”) to the drain body. • Silicone Sealant (833-AA) • Vinyl Bumperguard (E-77-AA) • Stainless Steel Bumperguard (E-88-AA) • Stainles Steel Wall Guard (MSG2424, MSG2828, MG3232, MSG3636, and MSG3624)
FIAT PRODUCTS
¤
A CRANE PLUMBING COMP ANY CR/PL© 04/03 Printed in U.S.A.
M
OLDED-STONE® MOP SERVICE BASIN
MSB 2424 MSB 3624
Molded-Stone® Mop Service Basin
FIAT PRODUCTS
¤
A CRANE PLUMBING COMP ANY IMPORTANT: Roughing-in dimensions may vary 1/2" and are subject to change or cancellation without prior notice. CR/PL© 04/03 Printed in U.S.A.
Kyle Paisley
June 6,016
PER: ______________________ DATE: ____________________
TD Canada Trust Amadon North Vancouver, BC All accessories to be ordered per specifications on the M-500
Prepared for:
Submittal Date: June 2, 2016
L-1
MURRO™ UNIVERSAL DESIGN WALL-HUNG SINK WITH EVERCLEAN
BARRIER FREE
VITREOUS CHINA
MURRO™ UNIVERSAL DESIGN WALL-HUNG SINK WITH EVERCLEAN • Vitreous chinawith EverClean • Available with rear and sealed overflow • Recessed self-draining deck • For concealed arm or wall support • Concealed arm support (by others) • Shown with optional shroud/knee contact guard 0059 020EC available
❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏
❏
0954 004EC (Illustrated) Faucet holes on 102mm (4”) Centres 0954 123EC Extra RH Hole Faucet holes on 102mm (4”) Centres 0954 121EC Extra LH Hole Faucet holes on 102mm (4”) Centres 0954 904EC Less Overflow Faucet holes on 102mm (4”) Centres 0958 008EC Faucet holes on 203mm (8”) Centres 0958 908EC Less Overflow Faucet holes on 203mm (8”) Centres 0955 001EC Centre hole only 0955 123EC CHO with extra RH Hole 0955 121EC CHO with extra LH Hole 0955 901EC CHO Less Overflow Nominal Dimensions: 520mm (20-1/2") deep, 540mm (21-1/4") wide Bowl sizes: 394mm (15-1/2") wide, 343mm (13-1/2") front to back, 127mm (5") deep 0059 020EC Shroud/Knee Contact Guard (Must be specified separately)
FINISHED WALL
* See faucet section for additional models available
102mm (4) 102mm (4) 197mm (7-3/4) 152mm (6)
83mm (3-1/4)
(4) 25mm (1") DIA. ACCESS HOLES FOR CONC. ARMS
(2) 16mm (5/8") DIA. ACCESS HOLES FOR CONC. ARMS
(2) 16mm (5/8") DIA. ACCESS HOLES FOR CONC. ARMS
165mm 406mm (6-1/2) (16) REF. 267mm (10-1/2)
C/L OF 1-1/4 O.D. WASTE
C/L OF 16mm X 29mm (5/8 X 1-1/8) ANCHOR SLOTS
425mm (16-3/4)
■ 127mm
44mm (1-3/4)
■ 216mm (8-1/2)
25mm (1) (1-5/8) ■146mm (5-3/4) 216mm (8-1/2)
▼133mm (5-1/4)
13mm(1/2) DIA. ANCHOR SCREW HOLES 89mm (3-1/2) 1-1/4 O.D. TAILPIECE
FINISHED WALL
■ 41mm
(5)
102mm (4)
520mm (20-1/2)
102mm (4)
C/L OF 54mm(2-1/8 DIA.) HOLES FOR CONCEALED ARMS
Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixtures • cUPC/CSA B45.1-2008 • 1995 National Building Code, section 3.7 and CAN/CSA-B651-M90 and OBC 3.7. To Be Specified ❏ Colour: ❏ Optional Shroud/Knee Contact guard: 0059 020EC ❏ Faucet* and Faucet Finish: ❏ Supplies & Trap 1-1/4": ❏ Concealed Arm Support Carrier (by others)
C/L OF (2) 13mm(1/2) DIA. KNEE CONTACT GUARD ANCHOR HOLES
*
C/L OF SUPPLIES AS REQUIRED
203mm (8) 260mm (10-1/4)
743mm (29-1/4) 710mm 254mm (28) (10) REF. IN 864mm ONTARIO (34) IN ONTARIO SIDE PROFILE 838mm (ADA) (33)
FINISHED FLOOR
NOTES:
● Top of front rim mounted 864mm (34") maximum from finished floor. MEETS THE AMERICAN DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR PEOPLE WITH DISABILITIES
For Universal Design Options, top of rim may be mounted at 813mm (32”) from finished floor to meet ADA and ANSI A117.1 requirements. A 864mm (34”) mounting height is required for California Title 24 and other more stringent knee space requirements. A 838mm (33”) mounting height is required for Ontario. Check local codes. Revised 08/12
540mm (21-1/4)
KEY ANGLE STOPS, LESS WALL ESCUTCHEONS. SUPPLIES REQUIRED. * LOOSE SHROUD/KNEE CONTACT GUARD 0059 020EC NOT INCLUDED AND MUST BE ORDERED SEPARATELY. ■ SUITABLE FOR REINFORCEMENT ONLY, ACTUAL DIMENSIONS MUST BE TAKEN FROM FIXTURE. DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE SUGGESTED. FAUCETS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
IMPORTANT:
© 2012 American Standard ULC
COM-009
AquaSense® TAG
Z6915-XL-GEN Lavatory Faucet with Hydroelectric Generator
Flow Control Options
Accessories
-J 1.5 gpm/ 5.7 Lpm Vandal-Resistant Laminar Flow -K 1.0 gpm/ 3.8 Lpm Vandal-Resistant Laminar Flow -L 1.0 gpm/ 3.8 Lpm Vandal-Resistant Aerator
-DSA
Engineering Specification ADA compliant, chrome plated sensor faucet for retrofit and new construction. Flow Rate 1.5 gpm Vandal Resistant Aerator (0.25 gal per 10 sec. cycle) Occupant Detection Infrared convergence-type proximity sensor Thirty Second Time out feature Spout module Chrome Plated Cast Brass Also Includes Integral 4": cover plate In-line filter Inlet for a 1/2"[13] ball riser
-MT -MV -SH -SSH -TMV -TMV-1 -_____
Drug Screening Applications (Hardwired Applications) Mixing Tee Temperature Mixing Valve Supply Hoses for Mixing Valve Single Stainless Supply Hose (-XL) Thermostatic Mixing Valve for Multiple Faucets Thermostatic Mixing Valve for Single Faucets Other
Zurn Lead Compliant products (-XL) are manufactured to comply with state laws and local codes that mandate lead content levels less than one quarter of one percent (0.25%) total lead content by weighted average.
Architectural/Engineering Approval ZURN INDUSTRIES, LLC. ♦ COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE ♦ SANFORD NC 27330 Phone: 1-800-997-3876 ♦ Fax: 919-775-3541 www.zurn.com In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive ♦ Mississauga, Ontario L4V1L2 Phone: 905-405-8272 Fax: 905-405-1292
AquaSense® is a registered trademark of Zurn Industries, LLC.
The information contained in this document is subject to change without notice. Please contact Zurn for most up to date information.
Rev. B Dwg. No. 309888
Date: 6/24/2014 Product No. Z6915-XL-GEN
_______________
SEMI-CAST P-TRAPS WITH WALL BEND Z8700-PC TO Z8708-PC TAG _______ Engineering Specification: Zurn Z8700-PC to Z8708-PC. – Chrome-plated cast brass (copper alloy) body P-trap with cleanout, tubular brass wall bend as specified, die-cast nuts, and shallow escutcheon with compression inlet.
Note: All dimensions are for reference only. Do not use for pre-plumbing.
PRODUCT NUMBER Z8700-PC Z8700-8-PC Z8700-15-PC Z8701-PC Z8701-9-PC Z8701-15-PC Z8702-PC* Z8702-9-PC* Z8702-15-PC* Z8703B-PC** Z8704B-PC** Z8706-PC Z8707-PC Z8708-PC*
A INLET in[mm] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/2[38] 1 1/2[38] 1 1/2[38] 1 1/2[38] 2[51] 1 1/4[32] 1 1/4[32] 1 1/2[38]
B OUTLET in[mm] GAUGE 1 1/4[32] 17 1 1/4[32] 17 1 1/4[32] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 2[51] 17 2[51] 17 1 1/4[32] 20 1 1/2[38] 20 1 1/2[38] 20
DIMENSIONS MASTER WEIGHT C in[mm] D in[mm] E in[mm] CARTON CARTON [lbs] 10[254] 2 1/2[64] 7 1/2[191] 12 24 11[279] 2 1/2[64] 8 1/2[216] 12 24 15[381] 2 1/2[64] 12 1/2[318] 18 40 10 1/2[267] 3[76] 7 1/2[191] 12 24 12[305] 3[76] 9[229] 12 24 15[381] 3[76] 12[305] 18 42 10 1/2[267] 3[76] 7 1/2[191] 12 24 12[305] 3[76] 9[229] 12 24 15[381] 3[76] 12[305] 18 42 12 1/2[318] 3 1/2[89] 9[229] 6 18 12 1/2[318] 3 1/2[89] 9[229] 6 18 10[254] 2 1/2[64] 7 1/2[191] 12 24 10 1/2[267] 3[76] 7 1/2[191] 12 24 10 1/2[267] 3[76] 7 1/2[191] 12 24
OPTIONAL ACCESSORIES Suffix Description ✔ ____ -B Brass Nuts ____ -BX Box Escutcheon ____ -CE Cast Brass Escutcheon with Setscrew ✔ ____ -D Deep Escutcheon (Note = not available for Z8703B-PC and Z8704B-PC) ____ -J Metal to Metal Ground Joint Connection ____ -WC Waste Connections - Compression ____ -15 15[381] C Dim. 1 1/4[32] and 1 1/2[38] Only ____ -18 18[457] C Dim. 1 1/4[32] and 1 1/2[38] Only * COMES WITH OPTIONAL 1-1/2" x 1-1/4" REDUCTION POLY-WASHER FOR INLET ** SHIPPED WITH BRASS NUTS UNLESS OTHERWISE SPECIFIED ZURN INDUSTRIES, LLC ♦ COMMERCIAL BRASS OPERATION ♦ 2640 SOUTH WORK STREET ♦ FALCONER NY 14733 Phone: 1-800-997-3876 ♦ Fax: 1-919-775-3541 ♦ www.zurn.com In Canada: ZURN INDUSTRIES LIMITED ♦ 3544 Nashua Drive ♦ Mississauga, Ontario L4V1L2 ♦ Phone: 905/405-8272 Fax: 905/405-1292 AquaSpec® is a registered trademark of Zurn Industries, LLC ©2011 Zurn Industries, LLC
Rev. K Date: 5/10/11 C.N. No. 127641 Dwg. No. 60111 Product No. Z8700-PC to Z8708-PC
____________________
STANDARD STOP WITH FLEXIBLE LAVATORY SUPPLY Z8800-XL-LR-PC TO Z8809-XL-LRLK-PC TAG _______
Engineering Specification: Zurn Z8800-XL-LR-PC to Z8809-XL-LRLK-PC Two Zurn chrome plated, solid brass angle stops with round wheel handles or loose key as specified, two 12"[305mm] flexible chrome plated copper lavatory risers complete with two chrome plated steel flanges. Z8808-XL-LR-PC to Z8809-XL-LRLK-PC include 5"[127mm] chrome plated copper extension tubes and deep bell steel flanges. Zurn Lead Compliant* “XL” products are a line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn “XL” products are manufactured with *not more than 0.25% lead content when used with respect to wetted surfaces of pipes and pipe fittings, plumbing fitting and fixtures: California Health & Safety Code § 116875; Vermont 9 VCA § 2470h.
PRODUCT NUMBER
Z8800 thru Z8803
Z8804 thru Z8805
EXT.
Z8800-XL-LR-PC
3/8 [10] IPS x 3/8 [10] OD
-
25
Z8800-XL-LRLK-PC
3/8 [10] IPS x 3/8 [10] OD
-
25
Z8802-XL-LR-PC
1/2 [13] IPS x 3/8 [10]OD
-
25
Z8802-XL-LRLK-PC
1/2 [13] IPS x 3/8 [10] OD
-
25
Z8803-XL-LR-PC
1/2 [13] IPS x 1/2 [13] OD
-
25
Z8803-XL-LRLK-PC
1/2 [13] IPS x 1/2 [13] OD
-
25
Z8804-XL-LR-PC
1/2 [13] NOM x 3/8 [10] OD
-
25
Z8804-XL-LRLK-PC 1/2 [13] NOM x 3/8 [10] OD
-
25
Z8805-XL-LR-PC
1/2 [13] NOM x 1/2 [13] OD
-
25
Z8805-XL-LRLK-PC 1/2 [13] NOM x 1/2 [13] OD
-
25
Z8806-XL-LR-PC
1/2 [13] SWT x 3/8 [10] OD
-
25
Z8806-XL-LRLK-PC 1/2 [13] SWT x 3/8 [10] OD
-
25
Z8807-XL-LR-PC
1/2 [13] SWT x 1/2 [13] OD
-
25
Z8807-XL-LRLK-PC 1/2 [13] SWT x 1/2 [13] OD
-
25
Z8808-XL-LR-PC
Z8806 thru Z8807
Z8808 thru Z8809
MASTER WEIGHT CARTON CARTON LR LRLK
CONNECTIONS
1/2 [13] SWT x 3/8 [10] OD
5
25
Z8808-XL-LRLK-PC 1/2 [13] SWT x 3/8 [10] OD
5
25
Z8809-XL-LR-PC
5
25
5
25
1/2[13] SWT x1/2[13] OD
Z8809-XL-LRLK-PC 1/2 [13] SWT x 1/2 [13] OD
SUFFIXES -A Single supply option -C1 Standard Line Lock Shield Cap -CE Chrome Plated, Cast Brass, Flange with setscrew -D Chrome Plated Steel, Deep Bell Flange (Bell Type) -XP Cross Handle
24 25 24 25 24 25 24 25 24 25 24 25 24 25 28 33 28 33
*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
-3 -5 -15 -20 -30 -36
3[76] Nipple 5[127] Nipple 15[381] Supply Tube 20[508] Supply Tube 30[762] Supply Tube 36[914] Supply Tube
ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC 27330 Phone: 1-800-997-3876 Fax: 919-775-3541 World Wide Web: www.zurn.com In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905-405-8272 Fax: 905-405-1292 AquaSpec® is a registered trademark of Zurn Industries, LLC ©2009 Zurn Industries, LLC
Rev. B Dwg. No. 93347
Date: 8/8/13 Product No. Z8800-XL-LR-PC to Z8809-XL-LRLK-PC
WC - LEFT
CADET RIGHT HEIGHT™ ELONGATED PRESSURE-ASSISTED 6L TOILET
BARRIER FREE
VITREOUS CHINA
CADET RIGHT HEIGHT™ ELONGATED PRESSURE-ASSISTED 6L TOILET
❏
2467 016 • Vitreous china • Low-consumption (6.0 Lpf/1.3 gpf) • EverClean® surface inhibits the growth of stainand odor-causing bacteria, mold, and mildew on the surface • Elongated 16-1/2" (419mm) high bowl rim for accessible applications • Pressure-assisted siphon jet flush action • Fully-glazed 2-1/8” (54mm) trapway) ball pass • Generous 10 x 12” (254x305mm) water surface area • Close-coupled Flushometer tank* • Metal chrome trip lever • Speed Connect™ tank/bowl coupling system • Sanitary dam on bowl • 2 bolt caps • 100% factory flush tested FINISHED WALL • 12" (305mm) Rough-in Separate Component Parts:
❏
3483 001 Elongated 16-1/2" (419mm) high Universal Bowl with 2 bolt caps ❏ 4142 016 Flushometer tank complete with coupling components Nominal Dimensions: 768 x 521 x 781mm (30-1/4" x 20-1/2" x 30-3/4")
1 (27mm)
30-1/4 (768mm)
20-1/2 (521mm)
9 (226mm) 18-1/2 (470mm)
C/L OF SEAT POST HOLES 5-1/2 (140mm CENTRES)
3 (76mm)
Recommended static pressure range 25 psi - 80 psi
Alternate Configurations Available: 4142 600 Tank with tank cover locking device 4142 800 Tank with right hand trip lever 4142 900 Tank complete with right hand trip lever and tank cover locking device
❏ ❏ ❏
16-1/2 (419mm)
❑ Colour: ❑ White
❑ Bone
❑ Linen
❑ Black
❑ Seat: American Standard #5324 019 "Rise and Shine" (with easy to clean lift-off hinge system) solid plastic closed, elongated front seat with cover. See price page.
* 10 (254mm)
5/8 (16mm)
13-3/4 (347mm)
6 (152mm) 12 (305mm)
Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2-2008 / CSA B45.1-08 for Vitreous China Fixtures To Be Specified
30-3/4 (781mm)
SUPPLY AS REQ'D
Fixture only, seat and supply by others
*6 (152mm) FINISHED FLOOR
14 (356mm)
9-1/2 (238mm)
C/L OF OUTLET
NOTES: THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305mm (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS SUPPLIED. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*
❑ Seat: #5321 110 EverClean® Elongated Seat with Slow Close Snap-Off Hinges
❑ Alternate Seat: ❑ Supply with stop:
When installed so top of seat is 432 to 483mm (17" to 19") from the finished floor.
MEETS THE AMERICAN DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USEABLE BUILDING FACILITIESCHECK LOCAL CODES.
* Flushometer tank system by Flushmate® Div. of Sloan Valve Co.
07/10
TOI-223 © 2010 American Standard
COMMERCIAL EXTRA HEAVY-DUTY PLASTIC TOILET SEAT MODEL #
COLOR #
1655CT/1655SSCT _______ DESCRIPTION: Open front less cover, elongated, extra heavy-duty, injection molded solid plastic toilet seat. Features four molded-in bumpers, non self-sustaining (1655CT) or self-sustaining (1655SSCT) check hinges with non-corrosive 300 Series stainless steel posts and pintles and STA-TITE Commercial Fastening System™. This seat complies with IAPMO/ANSI Z124.5-2013 Plastic Toilet Seats as a class Commercial Heavy Duty. ®
SPECIFICATIONS: Size:
Elongated
Material:
Plastic
Style:
Open Front less Cover
Bumpers:
Four
Hinges:
Plastic Non Self-Sustaining (1655CT) or SelfSustaining (1655SSCT) with 300 Series Stainless Steel Posts and Pintles
Fastening System:
STA-TITE Commercial Fastening System™ ®
FEATURES: STA-TITE Commercial Fastening System™ ®
Non-Corrosive 300 Series Stainless Steel Posts and Pintles PLASTIC HINGES WITH STAINLESS STEEL POSTS AND PINTLES
STA-TITE® COMMERCIAL FASTENING SYSTEM™
DIMENSIONS:
5-1/2"
18-3/4"
7-5/8"
3-3/16" 14-5/16"
2-5/8"
18-3/8"
1" 1-1/4"
Proudly Made in the USA
Bemis Manufacturing Co., Sheboygan Falls, WI 53085 www.ToiletSeats.com
Phone: 800-558-7651 Fax: 800-292-3647 ©2014 0B7012285 REV C
STANDARD STOP W/ FLEXIBLE CLOSET SUPPLY Z8800CR-PC TO Z8809CRLK-PC TAG _______ Engineering Specification: Zurn Z8800CR-PC TO Z8809CRLK-PC One Zurn chrome plated, solid brass angle stop with round wheel handle or loose key as specified, one 12[305] flexible chrome plated copper closet riser complete with one chrome plated steel flange. Z8808CR-PC and Z8809CR-PC include one 5[127] chrome plated copper extension tube with deep bell steel flange.
Z8800 THRU Z8803 PRODUCT NUMBER Z8800CR-PC Z8800CRLK-PC Z8801CR-PC Z8801CRLK-PC Z8802CR-PC Z8802CRLK-PC Z8803CR-PC Z8803CRLK-PC Z8804CR-PC Z8804CRLK-PC Z8805CR-PC Z8805CRLK-PC Z8806CR-PC Z8806CRLK-PC Z8807CR-PC Z8807CRLK-PC Z8808CR-PC Z8808CRLK-PC Z8809CR-PC Z8809CRLK-PC SUFFIXES ____ - C1 ____ - CE ____ - D ____ - WD ____ - XP ____ - 3 ____ - 5 ____ - 15 ____ - 20
Z8804 THRU Z8805
Z8806 THRU Z8807
CONNECTIONS
EXT.
MASTER CARTON
3/8 [10] IPS x 3/8 [10] OD 3/8 [10] IPS x 3/8 [10] OD 3/8 [10] IPS x 1/2 [13] OD 3/8 [10] IPS x 1/2 [13] OD 1/2 [13] IPS x 3/8 [10] OD 1/2 [13] IPS x 3/8 [10] OD 1/2 [13] IPS x 1/2 [13] OD 1/2 [13] IPS x 1/2 [13] OD 1/2 [13] NOM x 3/8 [10] OD 1/2 [13] NOM x 3/8 [10] OD 1/2 [13] NOM x 1/2 [13] OD 1/2 [13] NOM x 1/2 [13] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 1/2 [13] OD 1/2 [13] SWT x 1/2 [13] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 1/2 [13] OD 1/2 [13] SWT x 1/2 [13] OD
– – – – – – – – – – – – – – – – 5 5 5 5
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
Z8808 THRU ZH8809 WEIGHT CARTON CR CRLK 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 16 18 16 18
Standard Line Lock Shield Cap Chrome Plated, Cast Brass, Flange with setscrew Chrome Plated Steel, Deep Bell Flange (Bell Type) Wrought Brass, Deep Flange, (Bell Type) Cross Handle 3[76] Nipple 5[127] Nipple 15[381] Supply Tube 20[508] Supply Tube
ZURN INDUSTRIES, LLC ♦ COMMERCIAL BRASS OPERATION ♦ 2640 SOUTH WORK STREET ♦ FALCONER NY 14733 Phone: 1-716-665-1132 ♦ Fax: 1-716-665-1135 ♦ World Wide Web: www.zurn.com In Canada: ZURN INDUSTRIES LIMITED ♦ 3544 Nashua Drive ♦ Mississauga, Ontario L4V1L2 ♦ Phone: 905/405-8272 Fax: 905/405-1292 AquaSpec® is a registered trademark of Zurn Industries, LLC ©2008 Zurn Industries, LLC
Rev. D Date: 1/19/09 C.N. No. 108226 Dwg. No. 60974 Product No. Z8800CR-PC TO Z8809CRLK-PC
WC - RIGHT
CADET FloWise™ RIGHT HEIGHT™ ELONGATED PRESSURE-ASSISTED TOILET 1.1 gpf / 4.2 Lpf VITREOUS CHINA
BARRIER FREE
CADET FloWise™ RIGHT HEIGHT™ ELONGATED PRESSURE-ASSISTED TOILET 1.1 gpf/ 4.2 Lpf
❏ 2467.100
• Vitreous china • High Efficiency, Ultra Low-consumption (1.1 gpf/4.2 Lpf) • EverClean® surface inhibits the growth of stain and odor-causing bacteria, mold, and mildew on the surface • Meets EPA WaterSense® criteria • Bowl rim at 16-1/2" for accessible applications • Elongated bowl • Pressure-assisted siphon jet flush action • Fully-glazed 2-1/8" trapway • 10 x 12" water surface area • Close-coupled Flushometer tank* • Metal chrome trip lever • Speed Connect ® tank/bowl coupling system • Sanitary dam on bowl • Two bolt caps • 100% factory flush tested • 12" Rough-in
❏ 2467.136 Same as above except with slotted
FINISHED WALL
rim bowl for bed pan holding (White only) ❏ 3483.100 Bowl with two bolt caps ❏ 3483.001 Same as above, Universal Bowl ❏ 3484.001 Bowl with slotted rim for bed pan holding with two bolt caps (White only) ❏ 4142.100 Tank complete with coupling components
1" (27mm)
Alternate Configurations Available: ❏ 4142.601 Tank and tank cover only with tank cover locking device ❏ 4142.801 Tank and tank cover only with right hand trip lever ❏ 4142.901 Tank complete with right hand trip lever and tank cover locking device Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2-2008 / CSA B45.1-08 for Vitreous China Fixtures • US EPA WaterSense® Specification for HET's
9" (226mm)
C/L OF SEAT POST HOLES 5-1/2" (140mm CENTERS) 30-3/4" (781mm)
3" (76mm)
SUPPLY AS REQ'D 16-1/2" (419mm)
* 10" (254mm)
5/8" (16mm)
13-3/4" (347mm)
6" (150mm) 12" (305mm)
* 6" (152mm) FINISHED FLOOR
14" (356mm)
9-1/2" (238mm)
C/L OF OUTLET
NOTES: THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305mm (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. * DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME A112.19.2-2008 / CSH B45.1-08. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black ❏ Seat: American Standard #5324.019 “Rise and Shine” (with easy to clean lift-off hinge system) solid plastic closed front seat with cover. ❏ American Standard #5321.110 EverClean ® seat with Slow Close snap-off hinges. ❏ Alternate Seat: ❏ Supply with Stop: © 2010 AS America Inc.
20-1/2" (516mm)
18-1/2" (470mm)
Nominal Dimensions: 768 x 521 x 781mm (30-1/4" x 20-1/2" x 30-3/4") Fixture only, seat and supply by others Recommended working pressure range 25 psi - 80 psi
30-1/4" (768mm)
Certified by
IAPMO R&T
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES - CHECK LOCAL CODES.
M51
When installed so top of seat is 432 to 483mm (17" to 19") from the finished floor.
Revised 2/10
COMMERCIAL EXTRA HEAVY-DUTY PLASTIC TOILET SEAT MODEL #
COLOR #
1655CT/1655SSCT _______ DESCRIPTION: Open front less cover, elongated, extra heavy-duty, injection molded solid plastic toilet seat. Features four molded-in bumpers, non self-sustaining (1655CT) or self-sustaining (1655SSCT) check hinges with non-corrosive 300 Series stainless steel posts and pintles and STA-TITE Commercial Fastening System™. This seat complies with IAPMO/ANSI Z124.5-2013 Plastic Toilet Seats as a class Commercial Heavy Duty. ®
SPECIFICATIONS: Size:
Elongated
Material:
Plastic
Style:
Open Front less Cover
Bumpers:
Four
Hinges:
Plastic Non Self-Sustaining (1655CT) or SelfSustaining (1655SSCT) with 300 Series Stainless Steel Posts and Pintles
Fastening System:
STA-TITE Commercial Fastening System™ ®
FEATURES: STA-TITE Commercial Fastening System™ ®
Non-Corrosive 300 Series Stainless Steel Posts and Pintles PLASTIC HINGES WITH STAINLESS STEEL POSTS AND PINTLES
STA-TITE® COMMERCIAL FASTENING SYSTEM™
DIMENSIONS:
5-1/2"
18-3/4"
7-5/8"
3-3/16" 14-5/16"
2-5/8"
18-3/8"
1" 1-1/4"
Proudly Made in the USA
Bemis Manufacturing Co., Sheboygan Falls, WI 53085 www.ToiletSeats.com
Phone: 800-558-7651 Fax: 800-292-3647 ©2014 0B7012285 REV C
STANDARD STOP W/ FLEXIBLE CLOSET SUPPLY Z8800CR-PC TO Z8809CRLK-PC TAG _______ Engineering Specification: Zurn Z8800CR-PC TO Z8809CRLK-PC One Zurn chrome plated, solid brass angle stop with round wheel handle or loose key as specified, one 12[305] flexible chrome plated copper closet riser complete with one chrome plated steel flange. Z8808CR-PC and Z8809CR-PC include one 5[127] chrome plated copper extension tube with deep bell steel flange.
Z8800 THRU Z8803 PRODUCT NUMBER Z8800CR-PC Z8800CRLK-PC Z8801CR-PC Z8801CRLK-PC Z8802CR-PC Z8802CRLK-PC Z8803CR-PC Z8803CRLK-PC Z8804CR-PC Z8804CRLK-PC Z8805CR-PC Z8805CRLK-PC Z8806CR-PC Z8806CRLK-PC Z8807CR-PC Z8807CRLK-PC Z8808CR-PC Z8808CRLK-PC Z8809CR-PC Z8809CRLK-PC SUFFIXES ____ - C1 ____ - CE ____ - D ____ - WD ____ - XP ____ - 3 ____ - 5 ____ - 15 ____ - 20
Z8804 THRU Z8805
Z8806 THRU Z8807
CONNECTIONS
EXT.
MASTER CARTON
3/8 [10] IPS x 3/8 [10] OD 3/8 [10] IPS x 3/8 [10] OD 3/8 [10] IPS x 1/2 [13] OD 3/8 [10] IPS x 1/2 [13] OD 1/2 [13] IPS x 3/8 [10] OD 1/2 [13] IPS x 3/8 [10] OD 1/2 [13] IPS x 1/2 [13] OD 1/2 [13] IPS x 1/2 [13] OD 1/2 [13] NOM x 3/8 [10] OD 1/2 [13] NOM x 3/8 [10] OD 1/2 [13] NOM x 1/2 [13] OD 1/2 [13] NOM x 1/2 [13] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 1/2 [13] OD 1/2 [13] SWT x 1/2 [13] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 3/8 [10] OD 1/2 [13] SWT x 1/2 [13] OD 1/2 [13] SWT x 1/2 [13] OD
– – – – – – – – – – – – – – – – 5 5 5 5
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
Z8808 THRU ZH8809 WEIGHT CARTON CR CRLK 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 16 18 16 18
Standard Line Lock Shield Cap Chrome Plated, Cast Brass, Flange with setscrew Chrome Plated Steel, Deep Bell Flange (Bell Type) Wrought Brass, Deep Flange, (Bell Type) Cross Handle 3[76] Nipple 5[127] Nipple 15[381] Supply Tube 20[508] Supply Tube
ZURN INDUSTRIES, LLC ♦ COMMERCIAL BRASS OPERATION ♦ 2640 SOUTH WORK STREET ♦ FALCONER NY 14733 Phone: 1-716-665-1132 ♦ Fax: 1-716-665-1135 ♦ World Wide Web: www.zurn.com In Canada: ZURN INDUSTRIES LIMITED ♦ 3544 Nashua Drive ♦ Mississauga, Ontario L4V1L2 ♦ Phone: 905/405-8272 Fax: 905/405-1292 AquaSpec® is a registered trademark of Zurn Industries, LLC ©2008 Zurn Industries, LLC
Rev. D Date: 1/19/09 C.N. No. 108226 Dwg. No. 60974 Product No. Z8800CR-PC TO Z8809CRLK-PC
SK-1
DROP IN SINK: ALBS4605P-1 ALBS4605P-1 | 2000101747
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2 mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.408. Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location. Includes 3 1/2" (89 mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece. Model Options: MECH ALBS4605P-1/1, 1 faucet hole, 1 1/2" diameter ALBS4605P-1/3, 3 faucet holes, 1 1/2" diameter, 4" centers, 8" centerset ALBS4605P-1, Custom (non-returnable)
to confirm
TECHNICAL DATA type of basin
Single Compartment
PROJECT INFORMATION
bowl depth
5''
Item Location
Bowl finish
satin finished
Bowl front to back
14''
Bowl left to right
16''
Number
gross weight
4.24 kg
Quote Number
material
stainless steel
Notes
material code
1.4301 Chrome Nickel steel V2A
material thickness grade
18 gauge (1.2 mm)
Overall front to back
18 13/16''
Overall left to right
18 1/8''
overflow
no
faucet ledge
yes
type of mounting
drop in
type of waste kit
3 1/2" crumb cup strainer
Project
Engineer’s Approval
Franke Commercial Systems | [email protected] | www.franke-commercial.com | 2016-06-02
undercoated
yes
waste hole position
centre
net weight
3.10 kg
Franke Commercial Systems | [email protected] | www.franke-commercial.com | 2016-06-02
_______________
SEMI-CAST P-TRAPS WITH WALL BEND Z8700-PC TO Z8708-PC TAG _______ Engineering Specification: Zurn Z8700-PC to Z8708-PC. – Chrome-plated cast brass (copper alloy) body P-trap with cleanout, tubular brass wall bend as specified, die-cast nuts, and shallow escutcheon with compression inlet.
Note: All dimensions are for reference only. Do not use for pre-plumbing.
PRODUCT NUMBER Z8700-PC Z8700-8-PC Z8700-15-PC Z8701-PC Z8701-9-PC Z8701-15-PC Z8702-PC* Z8702-9-PC* Z8702-15-PC* Z8703B-PC** Z8704B-PC** Z8706-PC Z8707-PC Z8708-PC*
A INLET in[mm] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/4[32] 1 1/2[38] 1 1/2[38] 1 1/2[38] 1 1/2[38] 2[51] 1 1/4[32] 1 1/4[32] 1 1/2[38]
B OUTLET in[mm] GAUGE 1 1/4[32] 17 1 1/4[32] 17 1 1/4[32] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 1 1/2[38] 17 2[51] 17 2[51] 17 1 1/4[32] 20 1 1/2[38] 20 1 1/2[38] 20
DIMENSIONS MASTER WEIGHT C in[mm] D in[mm] E in[mm] CARTON CARTON [lbs] 10[254] 2 1/2[64] 7 1/2[191] 12 24 11[279] 2 1/2[64] 8 1/2[216] 12 24 15[381] 2 1/2[64] 12 1/2[318] 18 40 10 1/2[267] 3[76] 7 1/2[191] 12 24 12[305] 3[76] 9[229] 12 24 15[381] 3[76] 12[305] 18 42 10 1/2[267] 3[76] 7 1/2[191] 12 24 12[305] 3[76] 9[229] 12 24 15[381] 3[76] 12[305] 18 42 12 1/2[318] 3 1/2[89] 9[229] 6 18 12 1/2[318] 3 1/2[89] 9[229] 6 18 10[254] 2 1/2[64] 7 1/2[191] 12 24 10 1/2[267] 3[76] 7 1/2[191] 12 24 10 1/2[267] 3[76] 7 1/2[191] 12 24
OPTIONAL ACCESSORIES Suffix Description ____ -B Brass Nuts ____ -BX Box Escutcheon ____ -CE Cast Brass Escutcheon with Setscrew ____ -D Deep Escutcheon (Note = not available for Z8703B-PC and Z8704B-PC) ____ -J Metal to Metal Ground Joint Connection ____ -WC Waste Connections - Compression ____ -15 15[381] C Dim. 1 1/4[32] and 1 1/2[38] Only ____ -18 18[457] C Dim. 1 1/4[32] and 1 1/2[38] Only * COMES WITH OPTIONAL 1-1/2" x 1-1/4" REDUCTION POLY-WASHER FOR INLET ** SHIPPED WITH BRASS NUTS UNLESS OTHERWISE SPECIFIED ZURN INDUSTRIES, LLC ♦ COMMERCIAL BRASS OPERATION ♦ 2640 SOUTH WORK STREET ♦ FALCONER NY 14733 Phone: 1-800-997-3876 ♦ Fax: 1-919-775-3541 ♦ www.zurn.com In Canada: ZURN INDUSTRIES LIMITED ♦ 3544 Nashua Drive ♦ Mississauga, Ontario L4V1L2 ♦ Phone: 905/405-8272 Fax: 905/405-1292 AquaSpec® is a registered trademark of Zurn Industries, LLC ©2011 Zurn Industries, LLC
Rev. K Date: 5/10/11 C.N. No. 127641 Dwg. No. 60111 Product No. Z8700-PC to Z8708-PC
____________________
STANDARD STOP WITH FLEXIBLE LAVATORY SUPPLY Z8800-XL-LR-PC TO Z8809-XL-LRLK-PC TAG _______
Engineering Specification: Zurn Z8800-XL-LR-PC to Z8809-XL-LRLK-PC Two Zurn chrome plated, solid brass angle stops with round wheel handles or loose key as specified, two 12"[305mm] flexible chrome plated copper lavatory risers complete with two chrome plated steel flanges. Z8808-XL-LR-PC to Z8809-XL-LRLK-PC include 5"[127mm] chrome plated copper extension tubes and deep bell steel flanges. Zurn Lead Compliant* “XL” products are a line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn “XL” products are manufactured with *not more than 0.25% lead content when used with respect to wetted surfaces of pipes and pipe fittings, plumbing fitting and fixtures: California Health & Safety Code § 116875; Vermont 9 VCA § 2470h.
PRODUCT NUMBER
Z8800 thru Z8803
Z8804 thru Z8805
EXT.
Z8800-XL-LR-PC
3/8 [10] IPS x 3/8 [10] OD
-
25
Z8800-XL-LRLK-PC
3/8 [10] IPS x 3/8 [10] OD
-
25
Z8802-XL-LR-PC
1/2 [13] IPS x 3/8 [10]OD
-
25
Z8802-XL-LRLK-PC
1/2 [13] IPS x 3/8 [10] OD
-
25
Z8803-XL-LR-PC
1/2 [13] IPS x 1/2 [13] OD
-
25
Z8803-XL-LRLK-PC
1/2 [13] IPS x 1/2 [13] OD
-
25
Z8804-XL-LR-PC
1/2 [13] NOM x 3/8 [10] OD
-
25
Z8804-XL-LRLK-PC 1/2 [13] NOM x 3/8 [10] OD
-
25
Z8805-XL-LR-PC
1/2 [13] NOM x 1/2 [13] OD
-
25
Z8805-XL-LRLK-PC 1/2 [13] NOM x 1/2 [13] OD
-
25
Z8806-XL-LR-PC
1/2 [13] SWT x 3/8 [10] OD
-
25
Z8806-XL-LRLK-PC 1/2 [13] SWT x 3/8 [10] OD
-
25
Z8807-XL-LR-PC
1/2 [13] SWT x 1/2 [13] OD
-
25
Z8807-XL-LRLK-PC 1/2 [13] SWT x 1/2 [13] OD
-
25
Z8808-XL-LR-PC
Z8806 thru Z8807
Z8808 thru Z8809
MASTER WEIGHT CARTON CARTON LR LRLK
CONNECTIONS
1/2 [13] SWT x 3/8 [10] OD
5
25
Z8808-XL-LRLK-PC 1/2 [13] SWT x 3/8 [10] OD
5
25
Z8809-XL-LR-PC
5
25
5
25
1/2[13] SWT x1/2[13] OD
Z8809-XL-LRLK-PC 1/2 [13] SWT x 1/2 [13] OD
SUFFIXES -A Single supply option -C1 Standard Line Lock Shield Cap -CE Chrome Plated, Cast Brass, Flange with setscrew -D Chrome Plated Steel, Deep Bell Flange (Bell Type) -XP Cross Handle
24 25 24 25 24 25 24 25 24 25 24 25 24 25 28 33 28 33
*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
-3 -5 -15 -20 -30 -36
3[76] Nipple 5[127] Nipple 15[381] Supply Tube 20[508] Supply Tube 30[762] Supply Tube 36[914] Supply Tube
ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC 27330 Phone: 1-800-997-3876 Fax: 919-775-3541 World Wide Web: www.zurn.com In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905-405-8272 Fax: 905-405-1292 AquaSpec® is a registered trademark of Zurn Industries, LLC ©2009 Zurn Industries, LLC
Rev. B Dwg. No. 93347
Date: 8/8/13 Product No. Z8800-XL-LR-PC to Z8809-XL-LRLK-PC
Lav Guard2 Sbmttl 2-07
2/7/07
2:22 PM
Page 1
ADA-compliant undersink protection
Submittal Sheet General Description: LAV GUARD® 2 E-Z Series waste and supply piping covers satisfy ADA compliance requirements. Built-in E-Z Grip internal fasteners and internal, E-Z Tear-To-Fit trimming feature allow for fast installation without tools. Series #100 E-Z kits are designed to fit on all tubular and cast brass P-trap assemblies. Series #400 kits are the “original” LAV GUARD design and fit schedule 40 ABS and PVC P-trap assemblies — regardless of their geometry or rotational offset. Valve cover completely encloses angle valve and supply tube for both handled and keyed type water stops. ____________________________________________ Material Molded vinyl ____________________________________________ Nominal Wall 1/8" constant ____________________________________________ Durometer 70 -80 - Shore A ____________________________________________ UV Protection Will not fade or discolor ____________________________________________ Durability Virtually indestructible ____________________________________________ Internal, E-Z Tear-To-Fit trim feature ____________________________________________
Trimming (E-Z Series)
Internal E-Z Grip fasteners (reusable) ____________________________________________
Fasteners (E-Z Series)
Color China white ____________________________________________ Paintability Apply Latex paint ____________________________________________ Burning Characteristics Self extinguished ASTM D-635 0 sec (ATB) 0 mm (AEB) ____________________________________________ Bacteria/Fungus ASTM G21 and G22/ Resistance Result: 0 growth ____________________________________________ Maintenance Use common detergents ____________________________________________
Shown with Accessory #105 E-Z (fits all standard 5" offset wheelchair strainers). Accessories105 E-Z,106 E-Z, and 107 E-Z can be purchased separately.
Internal ribs add cushioning and thermal resistance
E-Z Grip internal fasteners
Tear-to-fit on internal dimensioned tear lines.
Install over pipes. Press finger recesses to engage internal fasteners. To remove covers, firmly pull seam apart using a strong grip.
10" waste arm cover with internal E-Z Tear-To-Fit trim feature J-bend covers all tubular and cast brass configurations
E-Z Series Shown
Vent hole keeps P-trap dry
#100 E-Z Series (shown above right) for tubular and cast brass P-trap assemblies. #400W * Series (original design) for schedule 40 P-trap assemblies. ■ Model #99 E-Z
One angle valve and supply cover __________________
■ Model #100 E-Z
One P-trap cover _________________
■ Model #400W*
One P-trap cover _________________
■ Model #101 E-Z
One P-trap cover, one angle valve cover _________________ One P-trap cover, one angle valve cover
■ Model #102 E-Z
One P-trap cover, two angle valves and covers ___________________
■ Model #402W*
One P-trap cover, two angle valves and covers ___________________
■ Model #103 E-Z
One P-trap cover, two angle valves and supply covers, one 5" offset tailpiece wheelchair strainer cover ___________________
■ Accessory #105 E-Z
One 5" offset tailpiece wheelchair strainer assembly
*All #400W series items are the “original” LAV GUARD design and ®
construction. Specifications may change without notice.
Accessory 105 E-Z
IPS Corporation, 202 Industrial Park Lane, Collierville, TN 38017 (901) 853-5001 (800) 340-5969 FAX: (901) 853-5008 e-mail: [email protected] Internet: http://www.truebro.com
Vent slots keep valve dry 10" tailpiece cover
E-Z Tear-To-Fit trim grooves
■ Model #401W* Manufactured under one or more of the following U.S. or Canadian patents. Other patents pending. 5,303,730 5,360,031 5,524,669 5,564,463 5,678,598 5,699,828 5,915,412 5,915,413 5,901,739 5,960,820 2,075,324 2,119,427 2,136,027 2,158,083
9" supply tube cover with internal E-Z Tear-To-Fit trim grooves
NOTE: Accessory #105 E-Z is included in #103 E-Z kits.
Accessory 106 E-Z
■ Accessory #105-K Kohler 6" offset
____________________ ■ Accessory #106 E-Z
One basket strainer cover and offset waste cover (adjustable to 18")
____________________ ■ Accessory #107 E-Z
Two basket strainer covers and center or end outlet waste cover (adjustable)
____________________ ■ Accessory #Ex99 E-Z
One 16" extension for water supply
____________________ ■ Accessory #Ex100 E-Z
One 16" extension for drain waste arm or tailpiece
Accessory 107 E-Z (Configuration Options Shown) Center Outlet
End Outlet
________________________________________ Designer _________________________________________ Job/Location
TRUEBRO reserves the right to make product and material changes at any time without notice.
2 / 07
JS-1
M
MSB 2424 MSB 3624
OLDED-STONE® MOP SERVICE BASIN
Molded-Stone® Mop Service Basin
FEATURES • MSB 2424 The MSB 2424 shall have overall outside dimensions of 24” x 24” x 10”. The molding shall be done in matched metal dies under heat and pressure resulting in a one-piece homogeneous product. The unit shall have 10” high walls with not less than 1” wide. The stainless steel drain body is designed to provide for a caulk connection or QDC-3 joint to a 3” drain pipe. A combination dome strainer and lint basket made from stainless steel shall be included with factory installed stainless steel drain body for caulked joint to accept a 3” pipe. • MSB 3624
NOTES
OPTIONS • Service Faucet (830-AA): Chrome plated with vacuum breaker, integral stops, adjustable wall brace, pail hook and 3 ⁄4” hose thread on spout.
The MSB 3624 shall have overall outside dimensions of 36” x 24” x 10”. The molding shall be done in matched metal dies under heat and pressure resulting in a one-piece homogeneous product. The unit shall have 10” high walls with not less than 1” wide shoulders and an integrally molded shelf 10 9⁄16” wide where indicated. The stainless steel drain body is designed to provide for a caulk connection or QDC-3 joint to a 3” drain pipe. A combination dome strainer and lint basket made from stainless steel shall be included with factory installed stainless steel drain body for caulked joint to accept a 3” pipe.
• Hose and Hose Bracket (832-AA) • Mop Hanger (889-CC) • Alternate Strainer (1453-BB) - For residential use (EFS-3624 and EFS-2424) • 3” Quick Drain Connector (QDC-3XH): Neoprene connecting gasket suitable for attaching extra heavy cast iron soil pipe and Schedule 40 steel pipe to the drain body. Neoprene connecting gasket (QDC-3SN) suitable for attaching hubless cast iron pipe (no hub, nominal O.D. of 3.31”) and service weight cast iron soil pipe (nominal O.D. of 3.38”) to the drain body. • Silicone Sealant (833-AA) • Vinyl Bumperguard (E-77-AA) • Stainless Steel Bumperguard (E-88-AA) • Stainles Steel Wall Guard (MSG2424, MSG2828, MG3232, MSG3636, and MSG3624)
FIAT PRODUCTS
¤
A CRANE PLUMBING COMP ANY CR/PL© 04/03 Printed in U.S.A.
M
OLDED-STONE® MOP SERVICE BASIN
MSB 2424 MSB 3624
Molded-Stone® Mop Service Basin
FIAT PRODUCTS
¤
A CRANE PLUMBING COMP ANY IMPORTANT: Roughing-in dimensions may vary 1/2" and are subject to change or cancellation without prior notice. CR/PL© 04/03 Printed in U.S.A.
