TE-6001 Series Hardware Assemblies for TE-6000 ... - Johnson Controls
Code No. LIT-1922230 Issued April 2, 2001
TE-6001 Series
Hardware Assemblies for TE-6000 Sensors Description
Applications
Selection Chart
TE-6001 hardware assemblies are used in conjunction with the TE-6000 Series elements in a wide variety of temperaturesensing applications.
The TE-6001 assemblies used in conjunction with the TE-6000 sensors cover a wide range of sensing applications including: • duct • immersion • dew point • outside air • room
Code Number
Description
TE-6001-1
Duct temperature element holder with handi-box
TE-6001-2
Housing for outside air temperature sensing element
TE-6001-3
Packing nut and fittings for use with WZ-1000 wells in immersion well applications
TE-6001-4
Single/dual element holder for TE-6000 elements in room temperature sensing applications
TE-6001-5
Dew point sensor kit
There are also two additional TE-6001 assemblies (TE-6001-961 and TE-6001-962), which are available for auxiliary pushbutton and toggle switch applications.
TE-6001-6
10 adhesive mounting pads for use with T-4100, T-4110
TE-6001-7
10 clips for use with T-4002/4003 and H-4100/5100
TE-6001-8
Mounting bracket for use with TE-6100 and TE-6300 averaging sensors
TE-6001-11
Duct temperature and humidity element holder (without the handi-box)
Repair Information If the TE-6001 Series Hardware Assemblies for TE-6000 Sensors fail to operate within their specifications, replace the unit. For replacement assemblies, contact the nearest Johnson Controls® representative.
TE-6001-961 Momentary pushbutton switch TE-6001-962 Maintained toggle switch
Accessories (T-4000 Plastic Covers For TE-6001-4) Code Number
Description
T-4000-2139
Horizontal
Without setpoint window or thermometer, with JCI logo, silver faceplate
T-4000-2140
Without setpoint window, with F/C thermometer and JCI logo, silver faceplate
T-4000-2639
Concealed setpoint, without thermometer, with JCI logo, gold faceplate
T-4000-2640
Concealed setpoint, with thermometer and JCI logo, gold faceplate
T-4000-2138
Horizontal or Vertical
Without setpoint window, thermometer, or JCI logo, with silver faceplate
T-4000-2144
Vertical
Without setpoint window or thermometer, with JCI logo and silver faceplate
TE-6001-1 Description The TE-6001-1 duct temperature element holder is used with TE-6000 elements in duct insertion applications. The TE-6001-1 is designed to hold one or two temperature sensors. A handi-box is supplied with the element holder.
9-3/16 233 4-3/16 106
2-3/16 55
TE-6001-1 Duct Temperature Element Holder Dimensions, (in./mm)
TE-6001-1 Duct Temperature Element Holder
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office. www.johnsoncontrols.com Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.
1 of 3
Hardware Assemblies for TE-6000 Sensors (Continued)
TE-6001-2 Description
1-5/16 33
The TE-6001-2 is a metal housing used with the TE-6000 temperature element in applications requiring outside air temperature sensing. A factory-mounted plastic clip is provided to hold the TE-6000 sensor in place.
7/8 22
1-1/4 32
1-5/16 33
4-1/2 114
TE-6001-2 Metal Housing Dimensions, (in./mm)
TE-6001-2 Metal Housing
Knockout for 1/2 in. Conduit (Top and Bottom) 13/16 20.5
TE-6001-3 Description The TE-6001-3 packing nut, fittings, and handi-box are used with WZ-1000-2, -4 and -5 immersion wells to house TE-6000 elements in well insertion applications.
1-3/32 27.5 2-3/16 55 1-1/16 27 17/32 13.5
Knockouts for 1/2 in. Conduit (Both Sides)
17/32 13.5
2-1/8 54 13/16 20.5
13/16 20.5
13/16 20.5 1-1/16 27
13/16 20.5
13/16 20.5
4-3/16 106
1/4 Holes (4) 6
TE-6001-3 Kit
TE-6001-3 Kit Dimensions, (in./mm)
1/16 in. Allen-head Screw (Each Side)
TE-6001-4 Description The TE-6001-4 temperature element holder is used with TE-6000 sensors in room-sensing applications. The TE-6001-4 can hold up to two temperature sensors. A mounting bracket and wallplate adapter are supplied. A T-4000 cover is required and must be ordered separately. See the Accessories table.
2-3/32 53
2-3/4 70
3-1/8 79 Clearance: Allow 3-1/2 in. (89 mm) each side for cover screw removal with T-4000 Allen wrench. 4-1/2 114
TE-6001-4 Temperature Element Holder
1-13/16 46
1/8 3
TE-6001-4 Temperature Element Holder Dimensions, (in./mm)
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office. www.johnsoncontrols.com Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.
2 of 3
Hardware Assemblies for TE-6000 Sensors (Continued) TE-6001-8 Mounting Bracket Description
1/2 13
te me Dia 1/4 6
1/2 1/4 13 6
r
Diameter 1/4 6
R 3 -2 7 96 /32
The TE-6001-8 Mounting Bracket is used with the TE-6100 and TE-6300 averaging sensors to maintain the minimum bend radius recommended for these sensors. It mounts to duct work with a single sheet metal screw.
/2 3-1 9 8 R
2x
4-11/32 110
2 x 3/8 10 9/16 14 3/8 10
3/32 3
7-3/16 183 3-19/32 91
1-13/32 36
2x
3/32 3
3/16 5 1-1/16 27
er et m ia /4 D 1 6
1/2 13
TE-6001-8 Mounting Bracket Dimensions, (in./mm)
TE-6001-11 Description The TE-6001-11 duct temperature holder is used with the TE-6000 sensors. It has a rigid aluminum support that extends into the duct to hold one or two TE-6000 temperature sensing elements.
2-13/32 61 1-1/2 38
9-3/16 233 2-13/32 61
1-1/2 38
TE-6001-11 Duct Temperature Holder Dimensions, (in./mm)
TE-6011-1 Duct Temperature Holder
3/4 19
1 1/2 25 13 1/2 13 1 25
1-1/2 38
1/2 13
1-1/2 38
3/4 19
Installing the TE-6001-1 and TE-6001-11 Products The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office. www.johnsoncontrols.com Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.
3 of 3
TE-6001 Series
Hardware Assemblies for TE-6000 Sensors Description
Applications
Selection Chart
TE-6001 hardware assemblies are used in conjunction with the TE-6000 Series elements in a wide variety of temperaturesensing applications.
The TE-6001 assemblies used in conjunction with the TE-6000 sensors cover a wide range of sensing applications including: • duct • immersion • dew point • outside air • room
Code Number
Description
TE-6001-1
Duct temperature element holder with handi-box
TE-6001-2
Housing for outside air temperature sensing element
TE-6001-3
Packing nut and fittings for use with WZ-1000 wells in immersion well applications
TE-6001-4
Single/dual element holder for TE-6000 elements in room temperature sensing applications
TE-6001-5
Dew point sensor kit
There are also two additional TE-6001 assemblies (TE-6001-961 and TE-6001-962), which are available for auxiliary pushbutton and toggle switch applications.
TE-6001-6
10 adhesive mounting pads for use with T-4100, T-4110
TE-6001-7
10 clips for use with T-4002/4003 and H-4100/5100
TE-6001-8
Mounting bracket for use with TE-6100 and TE-6300 averaging sensors
TE-6001-11
Duct temperature and humidity element holder (without the handi-box)
Repair Information If the TE-6001 Series Hardware Assemblies for TE-6000 Sensors fail to operate within their specifications, replace the unit. For replacement assemblies, contact the nearest Johnson Controls® representative.
TE-6001-961 Momentary pushbutton switch TE-6001-962 Maintained toggle switch
Accessories (T-4000 Plastic Covers For TE-6001-4) Code Number
Description
T-4000-2139
Horizontal
Without setpoint window or thermometer, with JCI logo, silver faceplate
T-4000-2140
Without setpoint window, with F/C thermometer and JCI logo, silver faceplate
T-4000-2639
Concealed setpoint, without thermometer, with JCI logo, gold faceplate
T-4000-2640
Concealed setpoint, with thermometer and JCI logo, gold faceplate
T-4000-2138
Horizontal or Vertical
Without setpoint window, thermometer, or JCI logo, with silver faceplate
T-4000-2144
Vertical
Without setpoint window or thermometer, with JCI logo and silver faceplate
TE-6001-1 Description The TE-6001-1 duct temperature element holder is used with TE-6000 elements in duct insertion applications. The TE-6001-1 is designed to hold one or two temperature sensors. A handi-box is supplied with the element holder.
9-3/16 233 4-3/16 106
2-3/16 55
TE-6001-1 Duct Temperature Element Holder Dimensions, (in./mm)
TE-6001-1 Duct Temperature Element Holder
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office. www.johnsoncontrols.com Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.
1 of 3
Hardware Assemblies for TE-6000 Sensors (Continued)
TE-6001-2 Description
1-5/16 33
The TE-6001-2 is a metal housing used with the TE-6000 temperature element in applications requiring outside air temperature sensing. A factory-mounted plastic clip is provided to hold the TE-6000 sensor in place.
7/8 22
1-1/4 32
1-5/16 33
4-1/2 114
TE-6001-2 Metal Housing Dimensions, (in./mm)
TE-6001-2 Metal Housing
Knockout for 1/2 in. Conduit (Top and Bottom) 13/16 20.5
TE-6001-3 Description The TE-6001-3 packing nut, fittings, and handi-box are used with WZ-1000-2, -4 and -5 immersion wells to house TE-6000 elements in well insertion applications.
1-3/32 27.5 2-3/16 55 1-1/16 27 17/32 13.5
Knockouts for 1/2 in. Conduit (Both Sides)
17/32 13.5
2-1/8 54 13/16 20.5
13/16 20.5
13/16 20.5 1-1/16 27
13/16 20.5
13/16 20.5
4-3/16 106
1/4 Holes (4) 6
TE-6001-3 Kit
TE-6001-3 Kit Dimensions, (in./mm)
1/16 in. Allen-head Screw (Each Side)
TE-6001-4 Description The TE-6001-4 temperature element holder is used with TE-6000 sensors in room-sensing applications. The TE-6001-4 can hold up to two temperature sensors. A mounting bracket and wallplate adapter are supplied. A T-4000 cover is required and must be ordered separately. See the Accessories table.
2-3/32 53
2-3/4 70
3-1/8 79 Clearance: Allow 3-1/2 in. (89 mm) each side for cover screw removal with T-4000 Allen wrench. 4-1/2 114
TE-6001-4 Temperature Element Holder
1-13/16 46
1/8 3
TE-6001-4 Temperature Element Holder Dimensions, (in./mm)
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office. www.johnsoncontrols.com Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.
2 of 3
Hardware Assemblies for TE-6000 Sensors (Continued) TE-6001-8 Mounting Bracket Description
1/2 13
te me Dia 1/4 6
1/2 1/4 13 6
r
Diameter 1/4 6
R 3 -2 7 96 /32
The TE-6001-8 Mounting Bracket is used with the TE-6100 and TE-6300 averaging sensors to maintain the minimum bend radius recommended for these sensors. It mounts to duct work with a single sheet metal screw.
/2 3-1 9 8 R
2x
4-11/32 110
2 x 3/8 10 9/16 14 3/8 10
3/32 3
7-3/16 183 3-19/32 91
1-13/32 36
2x
3/32 3
3/16 5 1-1/16 27
er et m ia /4 D 1 6
1/2 13
TE-6001-8 Mounting Bracket Dimensions, (in./mm)
TE-6001-11 Description The TE-6001-11 duct temperature holder is used with the TE-6000 sensors. It has a rigid aluminum support that extends into the duct to hold one or two TE-6000 temperature sensing elements.
2-13/32 61 1-1/2 38
9-3/16 233 2-13/32 61
1-1/2 38
TE-6001-11 Duct Temperature Holder Dimensions, (in./mm)
TE-6011-1 Duct Temperature Holder
3/4 19
1 1/2 25 13 1/2 13 1 25
1-1/2 38
1/2 13
1-1/2 38
3/4 19
Installing the TE-6001-1 and TE-6001-11 Products The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office. www.johnsoncontrols.com Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.
3 of 3
