TECHNICAL DATA SHEET High Speed Impact Cradle (HSIC)
TECHNICAL DATA SHEET
High Speed Impact Cradle (HSIC) BENEFITS • Accommodates extreme, high-impact applications • Durable and therefore increases the longevity of the conveyor belt • Easy installation • Low maintenance and cost effective with readily available replacement parts • Accommodates belt speeds of up to 6.5 m.s-1 and maximum belt widths of 2400 mm • Fixed belt sealing edge
FRONT AND SIDE VIEW 5 ROLL
N DRAWING DIM "A"
CRS 166.7
15 2 30
9
IDLER GAUGE LENGTH (FACE LENGTH + 10mm)
103
265
TROUGHING ANGLE (REF TABLE BELOW)
DIM "B"
IDLER FACE LENGTH (REF TABLE BELOW)
37.4
FRONT VIEW
696 (1050-1200BW) 534 (1350-2100BW)
1204 1340 1476 1658 1795 1931 2158 2272
1131 1259 1387 1557 1685 1813 2026 2133
DIM “B” 35~ 45~ 492 518 545 580 606 632 676 698
FIXING CENTERS (REF. TABLE BLOW)
BOTTOM VIEW
549 581 614 658 690 723 777 805
BELT WIDTH
FIXING CENTERS
166.7
BELT WIDTH (mm) 1050 1200 1350 1500 1650 1800 2000 2100
DIM “A” 35~ 45~
166.7
5 ROLL HSIC
(mm) 1050 1200 1350 1500 1650 1800 2000 2100
37.4
(in) 42 48 54 60 66 72 80 84
(mm) 1296 1448 1600 1752 1904 2058 2260 2362
IDLER FACE LENGTH (mm) 240 270 300 340 370 400 450 475
© COPYRIGHT MARTIN, A DIVISION OF MARTIN BULK HANDLING SOLUTIONS(PTY) LTD., T/A MARTIN ENGINEERING. ALL RIGHTS RESERVED COVERED BY U.S. AND FOREIGN PATENTS PENDING AND ISSUED. ® AND ™ INDICATE TRADEMARKS OF MARTIN ENGINEERING.
PROPERTY OF MARTIN
THE INFORMATION CONTAINED WITHIN THIS DRAWING FILE INVOLVES CONFIDENTIAL PROPRIETARY DESIGN RIGHTS OF MARTIN. IT IS SUBMITTED FOR A SPECIFIED PURPOSE AND THE RECIPIENT, BY ACCEPTING THIS DOCUMENT AGREES 1. THAT THIS DOCUMENT WILL NOT BE COPIED OR REPRODUCED IN WHOLE OR IN PART, EXCEPT TO MEET THE PURPOSE FOR WHICH IT WAS DELIVERED, AND 2. THAT ANY SPECIAL FEATURES PARTICULAR TO THIS DESIGN WILL NOT BE INCORPORATED IN OTHER PROJECTS AND/OR DESIGNS. 3. THAT THIS IS NOT FOR PUBLIC DISTRIBUTION
WITBANK SOUTH AFRICA + 27 13 656 5135 www.martin-eng.co.za TITLE
Form No. L3969-ZA © Martin Engineering Company 2014
MARTIN ENGINEERING WITBANK SOUTH AFRICA
5ROLL HSRC INSTALLATION DRAWING DRAWING NUMBER
HSRC 1050-2100BW
SHEET 1 OF 1
DRAWN BY: FK DATE: 2014-04-08 CHK.: LK DATE: ENG.: RB DATE: PM.: DB DATE: REV:1 SCALE: NTS
FRONT AND SIDE VIEW 3 ROLL INSTALLATION DRAWING
DIM "A"
8
30
15
2
CRS 166.7
IDLER FACE LENGTH (REF TABLE BELOW)
TROUGHING ANGLE (REF TABLE BELOW)
DIM "B"
IDLER GAUGE LENGTH (FACE LENGTH + 10mm)
103
265
37.4
696 (900-1200BW) 534 (1350-1800BW)
FRONT VIEW SIDE VIEW
3 ROLL HSIC DIM "B" 35~ 45~
BELT WIDTH
437 466 495 529 557 592 620 649
(mm) 750 900 1050 1200 1350 1500 1650 1800
803 935 1067 1225 1357 1515 1647 1779
737 858 978 1123 1244 1388 1509 1630
FIXING CENTERS (REF. TABLE BELOW)
BOTTOM VIEW
478 513 548 590 626 668 704 739
FIXING CENTERS
166.7
"BELT WIDTH (mm)" 750 900 1050 1200 1350 1500 1650 1800
DIM "A" 35~ 45~
166.7
W
TECHNICAL DATA SHEET
37.4
(in) 30 36 42 48 54 60 66 72
(mm) 990 1144 1296 1448 1600 1752 1904 2058
IDLER FACE LENGTH (mm) 290 340 390 450 500 560 610 660
© COPYRIGHT MARTIN, A DIVISION OF MARTIN BULK HANDLING SOLUTIONS(PTY) LTD., T/A MARTIN ENGINEERING. ALL RIGHTS RESERVED COVERED BY U.S. AND FOREIGN PATENTS PENDING AND ISSUED. ® AND ™ INDICATE TRADEMARKS OF MARTIN ENGINEERING.
PROPERTY OF MARTIN
THE INFORMATION CONTAINED WITHIN THIS DRAWING FILE INVOLVES CONFIDENTIAL PROPRIETARY DESIGN RIGHTS OF MARTIN. IT IS SUBMITTED FOR A SPECIFIED PURPOSE AND THE RECIPIENT, BY ACCEPTING THIS DOCUMENT AGREES 1. THAT THIS DOCUMENT WILL NOT BE COPIED OR REPRODUCED IN WHOLE OR IN PART, EXCEPT TO MEET THE PURPOSE FOR WHICH IT WAS DELIVERED, AND 2. THAT ANY SPECIAL FEATURES PARTICULAR TO THIS DESIGN WILL NOT BE INCORPORATED IN OTHER PROJECTS AND/OR DESIGNS. 3. THAT THIS IS NOT FOR PUBLIC DISTRIBUTION
WITBANK SOUTH AFRICA + 27 13 656 5135 www.martin-eng.co.za TITLE
MARTIN ENGINEERING WITBANK SOUTH AFRICA
3ROLL HSRC INSTALLATION DRAWING DRAWING NUMBER
HSRC 900-1800BW
Martin Engineering RSA Cnr Antwerpen str & Arnhemsingel Die Heuwel, Witbank, Emalahleni Tel +27 13 656 5135 Fax +27 13 656 5129 www.martin-eng.co.za
Subject to change without prior notice. Quality Management System Certified by DNV - ISO 9001
Form No. L3969-ZA © Martin Engineering Company 2014
SHEET 1 OF 1
DRAWN BY: FK DATE: 2014-04-08 CHK.: LK DATE: ENG.: RB DATE: PM.: DB DATE: REV:2 SCALE: NTS
High Speed Impact Cradle (HSIC) BENEFITS • Accommodates extreme, high-impact applications • Durable and therefore increases the longevity of the conveyor belt • Easy installation • Low maintenance and cost effective with readily available replacement parts • Accommodates belt speeds of up to 6.5 m.s-1 and maximum belt widths of 2400 mm • Fixed belt sealing edge
FRONT AND SIDE VIEW 5 ROLL
N DRAWING DIM "A"
CRS 166.7
15 2 30
9
IDLER GAUGE LENGTH (FACE LENGTH + 10mm)
103
265
TROUGHING ANGLE (REF TABLE BELOW)
DIM "B"
IDLER FACE LENGTH (REF TABLE BELOW)
37.4
FRONT VIEW
696 (1050-1200BW) 534 (1350-2100BW)
1204 1340 1476 1658 1795 1931 2158 2272
1131 1259 1387 1557 1685 1813 2026 2133
DIM “B” 35~ 45~ 492 518 545 580 606 632 676 698
FIXING CENTERS (REF. TABLE BLOW)
BOTTOM VIEW
549 581 614 658 690 723 777 805
BELT WIDTH
FIXING CENTERS
166.7
BELT WIDTH (mm) 1050 1200 1350 1500 1650 1800 2000 2100
DIM “A” 35~ 45~
166.7
5 ROLL HSIC
(mm) 1050 1200 1350 1500 1650 1800 2000 2100
37.4
(in) 42 48 54 60 66 72 80 84
(mm) 1296 1448 1600 1752 1904 2058 2260 2362
IDLER FACE LENGTH (mm) 240 270 300 340 370 400 450 475
© COPYRIGHT MARTIN, A DIVISION OF MARTIN BULK HANDLING SOLUTIONS(PTY) LTD., T/A MARTIN ENGINEERING. ALL RIGHTS RESERVED COVERED BY U.S. AND FOREIGN PATENTS PENDING AND ISSUED. ® AND ™ INDICATE TRADEMARKS OF MARTIN ENGINEERING.
PROPERTY OF MARTIN
THE INFORMATION CONTAINED WITHIN THIS DRAWING FILE INVOLVES CONFIDENTIAL PROPRIETARY DESIGN RIGHTS OF MARTIN. IT IS SUBMITTED FOR A SPECIFIED PURPOSE AND THE RECIPIENT, BY ACCEPTING THIS DOCUMENT AGREES 1. THAT THIS DOCUMENT WILL NOT BE COPIED OR REPRODUCED IN WHOLE OR IN PART, EXCEPT TO MEET THE PURPOSE FOR WHICH IT WAS DELIVERED, AND 2. THAT ANY SPECIAL FEATURES PARTICULAR TO THIS DESIGN WILL NOT BE INCORPORATED IN OTHER PROJECTS AND/OR DESIGNS. 3. THAT THIS IS NOT FOR PUBLIC DISTRIBUTION
WITBANK SOUTH AFRICA + 27 13 656 5135 www.martin-eng.co.za TITLE
Form No. L3969-ZA © Martin Engineering Company 2014
MARTIN ENGINEERING WITBANK SOUTH AFRICA
5ROLL HSRC INSTALLATION DRAWING DRAWING NUMBER
HSRC 1050-2100BW
SHEET 1 OF 1
DRAWN BY: FK DATE: 2014-04-08 CHK.: LK DATE: ENG.: RB DATE: PM.: DB DATE: REV:1 SCALE: NTS
FRONT AND SIDE VIEW 3 ROLL INSTALLATION DRAWING
DIM "A"
8
30
15
2
CRS 166.7
IDLER FACE LENGTH (REF TABLE BELOW)
TROUGHING ANGLE (REF TABLE BELOW)
DIM "B"
IDLER GAUGE LENGTH (FACE LENGTH + 10mm)
103
265
37.4
696 (900-1200BW) 534 (1350-1800BW)
FRONT VIEW SIDE VIEW
3 ROLL HSIC DIM "B" 35~ 45~
BELT WIDTH
437 466 495 529 557 592 620 649
(mm) 750 900 1050 1200 1350 1500 1650 1800
803 935 1067 1225 1357 1515 1647 1779
737 858 978 1123 1244 1388 1509 1630
FIXING CENTERS (REF. TABLE BELOW)
BOTTOM VIEW
478 513 548 590 626 668 704 739
FIXING CENTERS
166.7
"BELT WIDTH (mm)" 750 900 1050 1200 1350 1500 1650 1800
DIM "A" 35~ 45~
166.7
W
TECHNICAL DATA SHEET
37.4
(in) 30 36 42 48 54 60 66 72
(mm) 990 1144 1296 1448 1600 1752 1904 2058
IDLER FACE LENGTH (mm) 290 340 390 450 500 560 610 660
© COPYRIGHT MARTIN, A DIVISION OF MARTIN BULK HANDLING SOLUTIONS(PTY) LTD., T/A MARTIN ENGINEERING. ALL RIGHTS RESERVED COVERED BY U.S. AND FOREIGN PATENTS PENDING AND ISSUED. ® AND ™ INDICATE TRADEMARKS OF MARTIN ENGINEERING.
PROPERTY OF MARTIN
THE INFORMATION CONTAINED WITHIN THIS DRAWING FILE INVOLVES CONFIDENTIAL PROPRIETARY DESIGN RIGHTS OF MARTIN. IT IS SUBMITTED FOR A SPECIFIED PURPOSE AND THE RECIPIENT, BY ACCEPTING THIS DOCUMENT AGREES 1. THAT THIS DOCUMENT WILL NOT BE COPIED OR REPRODUCED IN WHOLE OR IN PART, EXCEPT TO MEET THE PURPOSE FOR WHICH IT WAS DELIVERED, AND 2. THAT ANY SPECIAL FEATURES PARTICULAR TO THIS DESIGN WILL NOT BE INCORPORATED IN OTHER PROJECTS AND/OR DESIGNS. 3. THAT THIS IS NOT FOR PUBLIC DISTRIBUTION
WITBANK SOUTH AFRICA + 27 13 656 5135 www.martin-eng.co.za TITLE
MARTIN ENGINEERING WITBANK SOUTH AFRICA
3ROLL HSRC INSTALLATION DRAWING DRAWING NUMBER
HSRC 900-1800BW
Martin Engineering RSA Cnr Antwerpen str & Arnhemsingel Die Heuwel, Witbank, Emalahleni Tel +27 13 656 5135 Fax +27 13 656 5129 www.martin-eng.co.za
Subject to change without prior notice. Quality Management System Certified by DNV - ISO 9001
Form No. L3969-ZA © Martin Engineering Company 2014
SHEET 1 OF 1
DRAWN BY: FK DATE: 2014-04-08 CHK.: LK DATE: ENG.: RB DATE: PM.: DB DATE: REV:2 SCALE: NTS
