TEL111 - Toto USA
TEL111 Series
Helix® EcoPower® Faucet FEATURES • Self-generating hydropowered EcoPower system • No minimum daily usage requirement • Micro-sensor positioned underneath the spout head for accurate hand detection ensuring smooth and consistent water distribution • Vandal resistant aerator housing • Durable chrome plated spout body • Single-hole mount • Kit includes spout body, controller box , and mounting hardware - less supply lines • 1.0 gpm laminar flow
MODELS TEL111-D10E • TELS111 (Helix Spout) • TELC101-D10E (Controller: 0.18gpc, 10 sec on-demand) TEL111-D10EM • TEL111-D10E (Helix Spout Kit) • TLM10 (Mixing Valve) TEL111-D10ET • TEL111-D10E (Helix Spout Kit) • TLT10 (Thermostatic Mixing Valve)
EcoPower
CODES/STANDARDS •
COLORS/FINISHES • #CP Polished Chrome
OPTIONAL ACCESSORIES • THP3158#CP - 4" Cover Plate • THP3159#CP - 8" Cover Plate
• • • • • •
PRODUCT SPECIFICATION TOTO Model #______________ The faucet shall have hydropowered self-generating, EcoPower System. The faucet shall have maximum of 10 seconds ondemand flow (0.18gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). The faucet shall have self-adjusting sensor.
*
Operates below federally mandated consumption limit of 0.25gpc Complies to California Green Building Code, CALGreen of 0.20 gpc Meets or exceeds ASME A112.18.1M/CSA B125.1, and NSF372-2011 Certifications: IAPMO(cUPC), State of Massachusetts, and others California Green Code and City of Los Angeles Water Efficiency Ordinance ADA compliant Complies with federal and state statutes as low-lead (contains a weighted average of 0.25% lead or less) For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets. LOW-LEAD
TEL111 Series
Helix® EcoPower® Faucet NOTE
SPECIFICATIONS Power Supply
EcoPower
Sensor Detection Range
Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage.
5-1/8" - 7-7/8" (130 - 200mm) Sensor is self-adjusting
Min (Dynamic/Flowing) Pressure: Water Supply Pressure 15psi (100kPa) Max (Static) Pressure: 80 psi (551kPa) Water Supply
G1/2 (1/2 NPSM compatible)
Inlet Temperature Range
32-110°F(0-42°C)
Water Saving On-Demand [10 sec.] faucet (0.18gpc) Federal Standard (0.25gpc) – 28% less CAL Green (0.20gpc) – 10% less
Ambient Temperature 32-104°F(0-40°C)
Humidity
Max. 90% RH
Flow Rate
0.18 gpc* - max 10 second On-Demand** (0.18 gpc = 1.0 gpm x 10/60 seconds) Equipped with 1.0 gpm aerated flow
Warranty
Three years
MENSIONS / BOSQUEJO / *Gallons per cycle (gpc) is the amount of water per usage cycle . TE/DIMENSÕES APROXIMADAS ** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed). Helix
Controller
Helix TELS115 TELS111
3-5/8”(94mm)
L=45-1/4” (L=1150mm) Ø2-3/16” (Ø55mm)
7/8” (23mm)
7” (178mm)
7” (178mm) 1-3/4” (44mm)
1-3/4”
3-5/16”(84mm) G1/2
7/8” (23mm) Φ1-5/8”( Φ 42mm)
G1/2
3-3/16”(82mm)
Φ1-5/8”( Φ 42mm)
G1/2 compatibel with ½ NPSM G1/2 compatibel with ½ NPSM
Thermostatic Mixing Valve (TLT10) These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA L=31-1/2”
G1/2
G1/2
Ø2-3/8” (Ø60mm)
Hot/Cold Mixing Tee (TLM10)
1-11/16” (42mm) 1-11/16” (42mm)
G1/2
1-7/16” (36mm)
2-13/16” (71mm)
7-5/16” (186mm)
(44mm)
1-3/4”
7” (178mm)
5-5/8”(142mm)
(114mm)
4-1/2” 5-5/8”(142mm)
Max deck thickness
2” (50mm)
5-5/8”(142mm)
G1/2
1-11/16” (42mm)G1/2
3/8 COMPRESSION
7-11/16” (194mm)
2-13/16” (71mm)
60°
3-5/16”(83mm)
3-3/16”(82mm)
3/8 COMPRESSION
TELS135 TELS131
1-7/16” (36mm)
G1/2
3-5/16”(84mm) G1/2
Helix-Wall Available Mixing Valves
3-5/8”(94mm)
4-5/8”(117mm) 3-5/16”(83mm)
(44mm)
6-3/4” 6-3/4” (168mm) (168mm)
4-1/2”
(114mm) Max deck thickness
(100mm)
2” (50mm)
3-15/16”
(100mm)
3-5/16”(83mm)
3-5/8”(94mm) 4-5/8”(117mm)
L=41-5/16” (L=1050mm) Faucet hole Ø1-3/8” (Ø35mm) Faucet hole Ø1-3/8” (Ø35mm) L=29-9/16” Faucet hole Ø1-3/8” (Ø35mm) (L=750mm) Faucet hole Ø1-3/8” (Ø35mm)
2-1/2” (63mm)
9-1/2” (238mm)
3-15/16”
4-15/16” 4-15/16” (125mm) (125mm)
(Ø35mm)
2” (50mm) Max deck thickness
(74mm)
(50mm)
2” (50mm) 2” (50mm) Max deck thickness Max deck thickness
2” 2” (50mm) (50mm) (50mm)
2-15/16”
3-3/4” 2-15/16” (95mm) (74mm) 3-3/4” (95mm)
60°
2-1/2” (63mm)
2” (50mm) Max deck thickness
4-1/2” (114mm)
4-5/8”(117mm)
#SS-01081, v.07
Helix® EcoPower® Faucet FEATURES • Self-generating hydropowered EcoPower system • No minimum daily usage requirement • Micro-sensor positioned underneath the spout head for accurate hand detection ensuring smooth and consistent water distribution • Vandal resistant aerator housing • Durable chrome plated spout body • Single-hole mount • Kit includes spout body, controller box , and mounting hardware - less supply lines • 1.0 gpm laminar flow
MODELS TEL111-D10E • TELS111 (Helix Spout) • TELC101-D10E (Controller: 0.18gpc, 10 sec on-demand) TEL111-D10EM • TEL111-D10E (Helix Spout Kit) • TLM10 (Mixing Valve) TEL111-D10ET • TEL111-D10E (Helix Spout Kit) • TLT10 (Thermostatic Mixing Valve)
EcoPower
CODES/STANDARDS •
COLORS/FINISHES • #CP Polished Chrome
OPTIONAL ACCESSORIES • THP3158#CP - 4" Cover Plate • THP3159#CP - 8" Cover Plate
• • • • • •
PRODUCT SPECIFICATION TOTO Model #______________ The faucet shall have hydropowered self-generating, EcoPower System. The faucet shall have maximum of 10 seconds ondemand flow (0.18gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). The faucet shall have self-adjusting sensor.
*
Operates below federally mandated consumption limit of 0.25gpc Complies to California Green Building Code, CALGreen of 0.20 gpc Meets or exceeds ASME A112.18.1M/CSA B125.1, and NSF372-2011 Certifications: IAPMO(cUPC), State of Massachusetts, and others California Green Code and City of Los Angeles Water Efficiency Ordinance ADA compliant Complies with federal and state statutes as low-lead (contains a weighted average of 0.25% lead or less) For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets. LOW-LEAD
TEL111 Series
Helix® EcoPower® Faucet NOTE
SPECIFICATIONS Power Supply
EcoPower
Sensor Detection Range
Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage.
5-1/8" - 7-7/8" (130 - 200mm) Sensor is self-adjusting
Min (Dynamic/Flowing) Pressure: Water Supply Pressure 15psi (100kPa) Max (Static) Pressure: 80 psi (551kPa) Water Supply
G1/2 (1/2 NPSM compatible)
Inlet Temperature Range
32-110°F(0-42°C)
Water Saving On-Demand [10 sec.] faucet (0.18gpc) Federal Standard (0.25gpc) – 28% less CAL Green (0.20gpc) – 10% less
Ambient Temperature 32-104°F(0-40°C)
Humidity
Max. 90% RH
Flow Rate
0.18 gpc* - max 10 second On-Demand** (0.18 gpc = 1.0 gpm x 10/60 seconds) Equipped with 1.0 gpm aerated flow
Warranty
Three years
MENSIONS / BOSQUEJO / *Gallons per cycle (gpc) is the amount of water per usage cycle . TE/DIMENSÕES APROXIMADAS ** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed). Helix
Controller
Helix TELS115 TELS111
3-5/8”(94mm)
L=45-1/4” (L=1150mm) Ø2-3/16” (Ø55mm)
7/8” (23mm)
7” (178mm)
7” (178mm) 1-3/4” (44mm)
1-3/4”
3-5/16”(84mm) G1/2
7/8” (23mm) Φ1-5/8”( Φ 42mm)
G1/2
3-3/16”(82mm)
Φ1-5/8”( Φ 42mm)
G1/2 compatibel with ½ NPSM G1/2 compatibel with ½ NPSM
Thermostatic Mixing Valve (TLT10) These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA L=31-1/2”
G1/2
G1/2
Ø2-3/8” (Ø60mm)
Hot/Cold Mixing Tee (TLM10)
1-11/16” (42mm) 1-11/16” (42mm)
G1/2
1-7/16” (36mm)
2-13/16” (71mm)
7-5/16” (186mm)
(44mm)
1-3/4”
7” (178mm)
5-5/8”(142mm)
(114mm)
4-1/2” 5-5/8”(142mm)
Max deck thickness
2” (50mm)
5-5/8”(142mm)
G1/2
1-11/16” (42mm)G1/2
3/8 COMPRESSION
7-11/16” (194mm)
2-13/16” (71mm)
60°
3-5/16”(83mm)
3-3/16”(82mm)
3/8 COMPRESSION
TELS135 TELS131
1-7/16” (36mm)
G1/2
3-5/16”(84mm) G1/2
Helix-Wall Available Mixing Valves
3-5/8”(94mm)
4-5/8”(117mm) 3-5/16”(83mm)
(44mm)
6-3/4” 6-3/4” (168mm) (168mm)
4-1/2”
(114mm) Max deck thickness
(100mm)
2” (50mm)
3-15/16”
(100mm)
3-5/16”(83mm)
3-5/8”(94mm) 4-5/8”(117mm)
L=41-5/16” (L=1050mm) Faucet hole Ø1-3/8” (Ø35mm) Faucet hole Ø1-3/8” (Ø35mm) L=29-9/16” Faucet hole Ø1-3/8” (Ø35mm) (L=750mm) Faucet hole Ø1-3/8” (Ø35mm)
2-1/2” (63mm)
9-1/2” (238mm)
3-15/16”
4-15/16” 4-15/16” (125mm) (125mm)
(Ø35mm)
2” (50mm) Max deck thickness
(74mm)
(50mm)
2” (50mm) 2” (50mm) Max deck thickness Max deck thickness
2” 2” (50mm) (50mm) (50mm)
2-15/16”
3-3/4” 2-15/16” (95mm) (74mm) 3-3/4” (95mm)
60°
2-1/2” (63mm)
2” (50mm) Max deck thickness
4-1/2” (114mm)
4-5/8”(117mm)
#SS-01081, v.07
