Test Equipment
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com Back to the Ideal 61-342 Product Info Page
Temperature**
*Accuracy not available for 2, add ±1.0% to accuracy.
±(3.0%+5) ±(3.0%+3)
-58~1500°F -50~800°C
The beeper turns on 120Ω. Continuity
Toggle for Frequency (>20% of range)
—
600V DC/AC rms
600V DC/AC rms ±(2.5%+5) (1sec. to exit mode.
WARNING: De-energize circuit before taking resistance measurement.
Capacitance ( ) Toggle for
nF
Turn power off, break circuit, insert meter in series, then turn power back on. • • • •
WARNING: De-energize circuit before checking diode.
WARNINGS: Check fuse for continuity before testing. Use the proper switch position and lead inputs. Never attempt to measure current on circuits or equipment with more than 600 volts potential. Duty cycle: 15sec ON / 15min OFF for 10A MAX
Temperature
Relative Mode ~ Note: On noisy circuits, turn dial to V, then toggle Hz button.
Toggle for Relative Mode
Battery & Fuse Replacement
Press to deduct reference value; depress to exit mode.
Toggle for °C
Backlight
Audible Continuity (• ))) )
(Remove tilt stand)
Backlight stays illuminated for 10 sec.
Toggle for •))) Open Circuit
Range
–
Closed Circuit
+
WARNING: To avoid electric shock, disconnect test leads before removing battery cover. WARNING: De-energize circuit and discharge capacitor before taking capacitance measurement. Measuring time: < 15sec for
Temperature**
*Accuracy not available for 2, add ±1.0% to accuracy.
±(3.0%+5) ±(3.0%+3)
-58~1500°F -50~800°C
The beeper turns on 120Ω. Continuity
Toggle for Frequency (>20% of range)
—
600V DC/AC rms
600V DC/AC rms ±(2.5%+5) (1sec. to exit mode.
WARNING: De-energize circuit before taking resistance measurement.
Capacitance ( ) Toggle for
nF
Turn power off, break circuit, insert meter in series, then turn power back on. • • • •
WARNING: De-energize circuit before checking diode.
WARNINGS: Check fuse for continuity before testing. Use the proper switch position and lead inputs. Never attempt to measure current on circuits or equipment with more than 600 volts potential. Duty cycle: 15sec ON / 15min OFF for 10A MAX
Temperature
Relative Mode ~ Note: On noisy circuits, turn dial to V, then toggle Hz button.
Toggle for Relative Mode
Battery & Fuse Replacement
Press to deduct reference value; depress to exit mode.
Toggle for °C
Backlight
Audible Continuity (• ))) )
(Remove tilt stand)
Backlight stays illuminated for 10 sec.
Toggle for •))) Open Circuit
Range
–
Closed Circuit
+
WARNING: To avoid electric shock, disconnect test leads before removing battery cover. WARNING: De-energize circuit and discharge capacitor before taking capacitance measurement. Measuring time: < 15sec for
