The Great Outdoors - Pillows - Rain Retail

Report 1 Downloads 56 Views
The Great Outdoors - Pillows Featuring The Great Outdoors Collection by Whistler Studios Pillow Design & Pattern by Heidi Pridemore of The Whimsical Workshop Pillow Size: 20” x 20”

Please Note: Quilt Image shown is a digital representation, fabric look may vary on your project. Check www.windhamfabrics.com Free Project section online to see if there are any pattern updates before you start your quilt project.

812 Jersey Ave – Jersey City, NJ 07310 – 201.659.0444 ~ FAX: 201.659.9719 www.windhamfabrics.com email: [email protected]

The Great Outdoors - Pillows Page 2

Estimated Fabric Requirements: 1 panel – 43304D-X Multi 1 ⅛ yards – 43308-4 Tan 2 ⅛ yards – 36383A-1 Green

43304D-X Multi (A)

43308-4 Tan (B)

36383A-1 Green (C)

Cutting Instructions: Fabric A: Wildlife Panel – Multi • Fussy cut four 14 ½” squares, each centered on a scene. Fabric B: Hoof Prints – Tan • Cut four 2” x WOF strips. Sub-cut the strips into eight 2” x 14 ½” strips. • Cut four 2” x WOF strips. Sub-cut the strips into eight 2” x 17 ½” strips. • Cut eight 2 ½” x WOF strips. Sub-cut the strips into (128) 2 ½” squares. Fabric C: Camo – Green • Cut one 2 ½” x WOF strip. Sub-cut the strip into sixteen 2 ½” squares. • Cut four 4 ½” x WOF strips. Sub-cut the strips into sixty-four 2 ½” x 4 ½” strips. • Cut four 13” x WOF strips. Sub-cut the strips into eight 13” x 20 ½” strips.

The Great Outdoors - Pillows Page 3

Pillow Assembly:

Center Block make 4 B

1. Sew one 2” x 14 ½” Fabric B strip to each side of one 14 ½” Fabric A square. Sew one 2” x 17 ½” Fabric B strip to the top and to the bottom of the Fabric A square. Trim the block to measure 16 ½” square to make one Center Block (Fig. 1). Repeat to make four Center Blocks total.

A

B

Trim to measure 16 ½” x 16 ½” after the borders are added

B

B

Fig. 1 2. Place one 2 ½” Fabric B square on the left side of one 2 ½” x 4 ½” Fabric C strip, right sides together (Fig. 2). Sew across the diagonal of the square from the upper right corner to the lower left corner (Fig. 2). Flip open the triangle formed and press (Fig. 3). Trim away the excess fabric from behind the triangle, leaving a ¼” seam allowance.

Fig. 3

Fig. 2

3. Place another 2 ½” Fabric B square on the right side of the 2 ½” x 4 ½” Fabric C strip, right sides together (Fig. 4). Sew across the diagonal of the square from the upper left corner to the lower right corner (Fig. 4). Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle, leaving a ¼” seam allowance to make one Unit 1 strip (Fig. 5). 4. Repeat Steps 2-3 to make sixty-four Unit 1 strips total. Unit 1 make 64 B Fig. 4

C

B

Fig. 5

5. Sew four Unit 1 strips together end to end to make one border strip. Repeat to make sixteen border strips total.

The Great Outdoors - Pillows Page 4 6. Sew one border strip to each side of one Center Block. Sew one 2 ½” Fabric C square to each end of one border strip. Repeat to make a second strip. Sew the strips to the top and to the bottom of the Center Block to make one Pillow Top (Fig. 6). Repeat to make four Pillow Tops total.

Pillow Layout make 4 C

C

C

C

Fig. 6 7. Turn under the 20 ½” (length) edge of one 13” x 20 ½” Fabric C strip approximately ¼”, press and repeat to make a finished edge on one edge of one 13” x 20 ½” Fabric C strip. Repeat with a second 13” x 20 ½” Fabric C strip. 8. Position and pin the each back envelope flap, right sides together with one Pillow Top, overlapping the finished edges in the middle and aligning the raw edges with the pillow front (Fig. 7). Stitch around the pillow front and back to complete the pillow.

C

Fig. 7 9. Turn the pillow right side out and insert the pillow form. 10. Repeat Steps 7-9 to make four pillows total. Be sure to visit www.windhamfabrics.com to see the complete collection and to download this and other FREE Projects