TiMAX® Mini Fragment System

TiMAX® Mini Fragment System Sales Sheet

TiMAX® Mini Fragment System Instruments

TiMAX® Implants • User-friendly instrumentation • Extended 2.7 mm screw lengths TiMAX™ for strength and biocompatibility

TiMAX® Bone Screws 1.5 mm, 2.0 mm, and 2.7 mm Cortical Screws • Self-tapping tip eliminates the need for pre-tapping

Plates 1.5 mm, 2.0 mm, and 2.7 mm Non-locking, Straight, T, L, Condylar Plates, and 1/4 Tubular Plates • Low-profile • Pre-contoured for specific anatomical applications

TiMAX Bone Screws ®

TiMAX Bone Plates ®

1.5 mm Plates

1.5 mm Cortical Screw, Self-tapping 8140-15-0XX

6 mm - 12 mm, in 1 mm increments 14 mm - 24 mm, in 2 mm increments

2.0 mm Cortical Screw, Self-tapping 8140-20-0XX

6 mm - 50 mm, in 2 mm increments 55 mm - 60 mm, in 5 mm increments (65 mm and 70 mm optional)

TiMAX® Washer 8140-99-002

Straight Plate: 20 holes

8240-2X-0X9

T-Plates: 9/3 and 9/4

8240-5X-015

Condylar Plates: L/R 5 holes

8240-11-0XX

Straight Plates: 3, 4, 5 and 20 holes

6 mm - 38 mm, in 2 mm increments

2.7 mm Cortical Screw, Self-tapping 8140-27-0XX

8240-10-020

For use with 4.0 mm Cancellous Screws Outer diameter: 7.0 mm

2.0 mm Plates

Qty.

Cat. No.

Description

2

8241-57-071

Small hex scrdriver shaft

1

9399-99-262

Self holding screw forceps

1

9399-99-276

Retractor small 6 mm wide

1

9399-99-277

Retractor small 8 mm wide

1

9399-99-278

Retractor large 15 mm wide

2

9399-99-280

Sharp hook

1

9399-99-430

Countersink 2.7 mm

1

9399-99-433

Double drill guide 1.1/1.5 mm

1

9399-99-434

Double drill guide 1.5/2.0 mm

1

9399-99-435

Double drill guide 2.0/2.7 mm

1

9399-99-438

Depth gauge 1.5-2.0 mm screws

1

9399-99-439

Bending iron plates 1.5 & 2.0 mm

1

9399-99-440

Bending plier plates 1.5 & 2.7 mm Wire bending pliers

1

9399-99-441

1

9399-99-442

Wire cutter short

1

9399-99-443

Bending iron for k wires

1

9399-99-444

Reduc. Forceps w/points narrow

1

9399-99-445

Reduc. Forceps w/points wide

1

9399-99-446

Holding forceps small plates

2

9399-99-468

Handle with mini quick coupling Periosteal elevator 3 mm

1

9399-99-469

1

9399-99-470

Countersink 1.5/2.0

2

9399-99-473

Mini hex screwdriver

2

8140-99-475

Mini holding sleeve

1

9399-99-517

Plate cutting forceps

1

9399-99-518

Stagbeetle forceps

1

9399-99-562

Quick coupling handle Small hex s/driver w/ groove

1

8241-58-070

1

9399-99-620

Depth gauge 2.7-4.0 mm

1

8241-66-000

Holding sleeve, 2.5 mm hex

1

9399-99-627

Holding clip

2

9399-99-386

Cortical tap 2.7 mm qc

2

8140-99-471

Cortical tap dia 1.5 mm

2

8140-99-472

Cortical tap dia 2.0 mm

Disposables

8240-2X-0XX

T-Plates: 2/2, 9/3, and 9/4

8240-31-00X

L-Plates: L/R 2/2

2

8140-99-380

Drill bit 1.1 mm dia qc

8240-5X-020

Condylar Plates: L/R 5 holes

2

9399-99-381

Drill bit 1.5 mm dia qc

2.7 mm Plates 8240-29-023

T-Plate: 3/2

8240-32-00X 8240-60-00X

2

9399-99-382

Drill bit 2.0 mm dia qc

2

9399-99-383

Drill bit 2.7 mm dia qc

L-Plates: L/R 3/2 1/4 Tubular Plates

10

9375-08-070

K-wire 0.8 X 70 mm (pack of 10)

3 hole - 8 hole, in 1 hole increments

10

9375-10-150

K-wire 1.0 X 150 mm (pack of 10)

10

9375-12-150

K-wire 1.2 X 150 mm (pack of 10)

10

9375-16-150

K-wire 1.6 X 150 mm (pack of 10)

All trademarks herein are the property of Biomet, Inc. or its subsidiaries unless otherwise indicated. This material is intended for the sole use and benefit of the Biomet sales force and physicians. It is not to be redistributed, duplicated or disclosed without the express written consent of Biomet. For product information, including indications, contraindications, warnings, precautions and potential adverse effects, see the package insert.

Responsible Manufacturer Biomet Trauma P.O. Box 587 56 E. Bell Drive Warsaw, Indiana 46581-0587 USA ©2013 Biomet Trauma • Form No. BMET0102.0 • REV1013

www.biomet.com

Instrumentation