Tool Kits
www.oelsales.com
1-800-818-2244
www.oelsales.com
1-800-818-2244
NFPA 70E
PPE Category Level Chart
2
Electrical Safety to Compliance Chart
4 5
Special Order Policy
6
WHO WE ARE We are a family owned American manufacturing company located in Colorado which, for over 20 years, has been serving the electrical, petro/chemical, mining, foundry and telecommunications industries both domestically and off-shore. Our Mission Statement as a corporation is succinct, focused and everlasting. It declares our sole purpose as a company, and it is our guide in which we weigh all of our actions and decisions.
Guide to Glove Sizing
23
8Cal Protection Equipment Kits
24
12Cal Protection Equipment Kits 25
Simply put “Our Business Is Saving Lives…” Terms & Conditions
6
What is Inherent Fabric?
7
Tencate to Tecasafe Plus®
8 9
OEL’s FR Shield
10
High Performance Shield Kits
11
Hat and Hood Kit
12
OEL’s Fresh Hood
13
Protection Hoods
14
Protection Premium Coveralls
15
In essence, our customers place their lives in our hands and it is to this end that we dedicate ourselves to on a daily basis and strive to ensure that this trust has not been misplaced. This commitment is ingrained in every individual we employ, and it can be measured in the exceptional products we produce, as well as in the courteous, expedient service that we provide to all of our customers on a daily basis. It is also our belief that to achieve our Mission Statement, it is simply not enough to just produce and ship state-of-theart products to our customers. The scope of our commitment includes offering the education necessary for our customers to make safe, logical choices for all of their project needs. These are the founding principles upon which we conduct business, and we will never deviate from, nor allow compromises to, these fundamental values. Blessed is the nation whose God is the LORD; and the people whom he hath chosen for his own inheritance. Psalms 33:12
A comprehensive line of convenient Arc Flash protective clothing! OHSA 29 CFR 1910.269 (1)6)(iii) requires employers to ensure that their employee’s clothing does not increase the extent of injuries sustained when exposed to flames or electric arcs. Clothing worn for a particular application must have a Breakeven Threshold Energy (EBT) or Arc Thermal Performance Value (ATPV) higher than the potential hazard to prevent the onset of second degree burns. The NFPA 70E standard addresses electrical-safety work practices and procedures. The standard is applicable to employees working on or near exposed energized electrical conductors or circuit parts.
16
Although not formally adopted by OSHA, NFPA 70E is often the defacto standard referenced in its citations. It requires employees to wear flame resistant (FR) clothing that meets the performance requirements of ASTM F1506 when exposure to electric arc flash is possible.
Protection Bib Overalls
17
Our flame resistant (FR) protective clothing meets or exceeds ASTM F1506 performance requirements. Always perform a careful hazard assessment. Determine the minimum PPE cal/cm2 rating based on the severity of the arc hazard. Refer to the table to the left, as your guide.
Protection Coats
18
Protection Outerwear
19
Protection Jackets
Rubber Insulating Gloves
20 22
to
The safest, most comfortable Electrical Safety PPE Solution in the business! www.oelsales.com
3
1-800-818-2244
25Cal Protection Equipment Kits 26 40Cal Protection Equipment Kits 27 55Cal Protection Equipment Kits 28 ASTM Switchboard Rubber Mat
29
Miscellaneous
30
Chart of Terms
31
Double Insulated Tool Line
32
OEL INSULATED TOOLS SOCKETS METRIC SOCKETS HEX BIT SOCKETS TORX BIT SOCKETS RATCHETS/TORQUE WRENCHES SOCKET ACCESSORIES WRENCHES GEAR BOX WRENCHES HEX WRENCHES OTHER WRENCHES/NUT DRIVERS SCREWDRIVERS/TORX DRIVERS PLIERS TOOL KITS
Telecom Tool Supplies
32-33 34-35 36 37 37 38 38 39-40 41 41-42 43 44 45 46-58
60
www.oelsales.com
1-800-818-2244
www.oelsales.com
5
1-800-818-2244
SPECIAL ORDER POLICY Effective August 1, 2012 - The following conditions for “SPECIAL ORDERS” will be required.
ALL SPECIAL ORDER APPAREL ITEMS:
• Special sizes and colors will have a 20% up-charge applied to the order total. • Minimum quantities of 6 items (all sizes combined) are required. • Custom embroidery – A $70.00 set up fee and $10.00 per item up-charge will be applied.
ALL SPECIAL ORDER TOOLS:
• The following minimum quantities for custom dipped tools and/or customer product sent to us for dipping are required. o ALL tools except for wrenches = minimum quantities of EACH SKU= 28 each o Wrenches = minimum quantity per SKU = 24 each
SPECIAL ORDER PRODUCT IS NON-RETURNABLE If you have any questions, please consult a sales specialist before placing your order!
TERMS AND CONDITIONS TERMS From the date of invoicing, net 30 days. All orders are subject to OEL credit approval. Visa/ MasterCard/American Express accepted.
quantities. Additional up-charges may apply as well as set-up fees and additional costs for custom embroidery. Minimum quantities may also apply to custom orders. Custom and made –to-order apparel and private branded product are non- returnable.
PRICING Pricing is contingent on cost and availability of materials and are subject to change without notice.
RETURNED GOODS POLICY Returned goods must be stock products. They must be in excellent condition, in the original packaging and not more than 90 days old (from invoicing date). Returned goods must be accompanied with an OEL Worldwide issued Return Merchandise Authorization (RMA) and are subject to a 15% restocking fee plus return freight charges. OEL reserves the right to reject returned product if the aforementioned requirements have not been met. Made-to-order /Custom orders are non-returnable.
MINIMUM ORDER OEL reserves the right to require minimum quantities for custom orders. FREIGHT All shipments are sent UPS and are an add-to-invoice unless other shipping arrangements are made in advance. DROP SHIPMENTS Will be made under the same freight policy mentioned above.
MATERIAL CLEANING AND CARE GUIDELINES For basic guidelines contact an OEL authorized regional Distributor or OEL Sales Representative. For more details contact OEL Custom Service.
RUSH ORDERS While rush orders are not always available, they are subject to a 15% expediting and administrative fee.
TRADEMARKS Nomex® is a registered trademark of DuPont and/or its affiliates. Protera® is a registered trademark of DuPont and/or its affiliates. Kevlar® is a registered trademark of DuPont and/or its affiliates. Indura® is a registered trademark of Westex Corporation. Ultrasoft® is a registered trademark of Westex Corporation. Modaquilt® is a registered trademark of Westex Corporation. Vinex® is a registered trademark of Westex Corporation. Twaron® is a registered trademark of Aramid and/or its affiliates. TecaSafe® /TecaSafe®plus are registered trademarks of TenCate and/or its affiliates. Reliant™ is a trademark of ITI Inovative Textiles Inc.
REPAIR AND REWORK POLICY OEL apparel products are guaranteed from defects in workmanship only. If any product is defective, contact OEL Customer Service for a Return Merchandise Authorization (RMA) prior to returning the product. Apparel is guaranteed for 90 days. Hand tools are guaranteed for life (torques one- year from invoicing). Robo Tools are guaranteed for 90 days. Contact Customer Service for other additional OEM warrantee details. OEL reserves the right to determine whether or not a product is defective.OEL reserves the right to repair or replace product if it has been determined to be defective. MADE TO ORDER/CUSTOM OEL offers custom and made-to-order apparel and tool kits. OEL authorized Distributors and Sales Representatives are available to assist in selecting the correct size and
www.oelsales.com
6
1-800-818-2244
WHAT IS INHERENT FABRIC AND HOW IS IT DIFFERENT FROM TREATED FABRIC? The term “inherent,” as it relates to flame resistant fabric, means that the flame resistant properties were created at the moment the actual fiber was spun resulting in a flame-resistance that is an intrinsic part of the inherently flame resistant fabric. This process is permanent, and cannot be washed out or worn out of the fiber no matter how the garment is used or laundered. Naturally flammable fabrics - such as cotton or cotton/nylon blends - that have a manufacturing step in their creation where a special mixture of chemicals is applied to make the final fabric flame-resistant (FR) are referred to as “treated” or “topically treated” fabrics. Unlike fabrics made with inherently FR fibers, chemically treated FR fabrics may lose some or all of their flame resistant properties over time through laundering and/or exposure to certain chemicals in the work environment.
WHY OEL FR SHIELD™ FABRICS? All OEL FR Shield™ fabrics used in the manufacturing of our ARC Flash apparel meets and or exceeds NFPA 70E, HRC 2, NFPA 2112 and ASTM F1506 performance standards and feature the best of the best: DuPont ™ - Protera® Glenraven ™- Glenguard® Tencate ™- Tecasafe ®plus Innovative Textiles™ - Reliant® DuPont™ Nomex® IIIA ArcGuard ®Revolite™ OEL Worldwide Industries is committed to remaining the vanguard of ARC Flash apparel and will use the most innovative and cutting edge Inherent fabrics available.
Our business is saving lives…
www.oelsales.com
7
1-800-818-2244
Unbeatable Electric Arc Protection.
Unbeatable Flash Fire Protection.
TenCate Tecasafe ® Plus is a comfortable, light-weight fabric with inherent heat and flame resistant properties. NFPA 70E HRC 2 compliant, it provides durable and affordable electric arc protection to electricians, electrical contractors, and other professionals with potential exposure to electric arc flash. Below, you will see how this inherently flame-resistant fabric provides superior protection and outperforms the competition. There’s also Tecasafe Plus Hi-Vis yellow. No need to wear a separate Hi-Vis vest over your flame resistant shirt.
TenCate Tecasafe ® Plus is a comfortable, light-weight fabric with inherent heat and flame resistant properties. NFPA 2112 certified, it provides durable and affordable flash fire protection for workers in the petroleum, petrochemical, fire service, and other professionals that may be exposed to flash fire. Below, you will see how this inherently flame-resistant fabric provides superior protection and outperforms other protective fabrics. There’s also Tecasafe Plus Hi-Vis yellow. No need to wear a separate Hi-Vis vest over your flame resistant shirt.
strength after thermal exposure
Manikin % Burn ASTM F 1930 Manikin Test % Body Burn After 3 sec. Exposure
ASTM D 5034 Tensile Strength Test After 10 sec. TPP Exposure
15
6.7 35
0
Tecasafe® Plus 700
Tecasafe® Plus 700
7.0 osy Indura Ultra Soft®
37
7.0 osy Indura Ultra Soft®
1.7
6.5 osy Protera®
6.5 osy Protera®
32 0
10
20
30
0
6.0 osy Nomex® IIIA
40
50
6.0 osy Nomex® IIIA
0
2
% Body Burn
TABER ABRASION TEST RESULTS TECASAFE PLUS 700
6
8
10
INDURA ULTRA SOFT®
resistance to thermal shrinkage NFPA 2112 TPP Thermal Shrinkage Test
®
PROTERA®
NOMEX® IIIA
150 Cycles
®
4
Lbs. Force — Warp
Tecasafe® Plus 700
1
7.0 osy Indura Ultra Soft®
1.3 250 Cycles
6.5 osy Protera® 6.0 osy Nomex® IIIA
4
4.5 osy Nomex® IIIA
• Inherently flame resistant – FR properties are built in, and won’t wash or wear out. Exceeds NFPA 2112 and NFPA 70E HRC 2 performance standards. • Comfortable to wear – Soft and breathable. Superior moisture management because of special cellulosic fiber content. • Exceptional durability – Outstanding abrasion resistance and better strength retention after multiple commercial washes. • Outstanding laundered appearance – Fabric retains its like-new look and maintains permanent pressed appearance better than other protective fabrics. • Excellent value – Long life cycle and competitive price means lowest cost.
7.7 9.5
20
2
4
6
8
10
% Warp Shrinkage
OEL FR Shield, powered by TenCate Tecasafe® Plus
www.oelsales.com
1-800-818-2244
• Khaki • Light Blue • Gray • Royal Blue • Red • Yellow • Orange • Hi-Vis Yellow • Navy 1
Tecasafe® Plus 700
Tecasafe® Plus 700-A
5.8 oz 197 g
7.0 oz 238 g
7.0 oz 238 g
48% fr-modacrylic 37% lyocell 15% aramid
48% fr-modacrylic 37% lyocell 15% aramid
45% fr-modacrylic 35% lyocell 20% aramid
•••
•••••••
•
6.5
9.0
10.1
5.0 min
8.0 min
1-800-818-2244
www.oelsales.com
1-800-818-2244
NFPA 70E
PPE Category Level Chart
2
Electrical Safety to Compliance Chart
4 5
Special Order Policy
6
WHO WE ARE We are a family owned American manufacturing company located in Colorado which, for over 20 years, has been serving the electrical, petro/chemical, mining, foundry and telecommunications industries both domestically and off-shore. Our Mission Statement as a corporation is succinct, focused and everlasting. It declares our sole purpose as a company, and it is our guide in which we weigh all of our actions and decisions.
Guide to Glove Sizing
23
8Cal Protection Equipment Kits
24
12Cal Protection Equipment Kits 25
Simply put “Our Business Is Saving Lives…” Terms & Conditions
6
What is Inherent Fabric?
7
Tencate to Tecasafe Plus®
8 9
OEL’s FR Shield
10
High Performance Shield Kits
11
Hat and Hood Kit
12
OEL’s Fresh Hood
13
Protection Hoods
14
Protection Premium Coveralls
15
In essence, our customers place their lives in our hands and it is to this end that we dedicate ourselves to on a daily basis and strive to ensure that this trust has not been misplaced. This commitment is ingrained in every individual we employ, and it can be measured in the exceptional products we produce, as well as in the courteous, expedient service that we provide to all of our customers on a daily basis. It is also our belief that to achieve our Mission Statement, it is simply not enough to just produce and ship state-of-theart products to our customers. The scope of our commitment includes offering the education necessary for our customers to make safe, logical choices for all of their project needs. These are the founding principles upon which we conduct business, and we will never deviate from, nor allow compromises to, these fundamental values. Blessed is the nation whose God is the LORD; and the people whom he hath chosen for his own inheritance. Psalms 33:12
A comprehensive line of convenient Arc Flash protective clothing! OHSA 29 CFR 1910.269 (1)6)(iii) requires employers to ensure that their employee’s clothing does not increase the extent of injuries sustained when exposed to flames or electric arcs. Clothing worn for a particular application must have a Breakeven Threshold Energy (EBT) or Arc Thermal Performance Value (ATPV) higher than the potential hazard to prevent the onset of second degree burns. The NFPA 70E standard addresses electrical-safety work practices and procedures. The standard is applicable to employees working on or near exposed energized electrical conductors or circuit parts.
16
Although not formally adopted by OSHA, NFPA 70E is often the defacto standard referenced in its citations. It requires employees to wear flame resistant (FR) clothing that meets the performance requirements of ASTM F1506 when exposure to electric arc flash is possible.
Protection Bib Overalls
17
Our flame resistant (FR) protective clothing meets or exceeds ASTM F1506 performance requirements. Always perform a careful hazard assessment. Determine the minimum PPE cal/cm2 rating based on the severity of the arc hazard. Refer to the table to the left, as your guide.
Protection Coats
18
Protection Outerwear
19
Protection Jackets
Rubber Insulating Gloves
20 22
to
The safest, most comfortable Electrical Safety PPE Solution in the business! www.oelsales.com
3
1-800-818-2244
25Cal Protection Equipment Kits 26 40Cal Protection Equipment Kits 27 55Cal Protection Equipment Kits 28 ASTM Switchboard Rubber Mat
29
Miscellaneous
30
Chart of Terms
31
Double Insulated Tool Line
32
OEL INSULATED TOOLS SOCKETS METRIC SOCKETS HEX BIT SOCKETS TORX BIT SOCKETS RATCHETS/TORQUE WRENCHES SOCKET ACCESSORIES WRENCHES GEAR BOX WRENCHES HEX WRENCHES OTHER WRENCHES/NUT DRIVERS SCREWDRIVERS/TORX DRIVERS PLIERS TOOL KITS
Telecom Tool Supplies
32-33 34-35 36 37 37 38 38 39-40 41 41-42 43 44 45 46-58
60
www.oelsales.com
1-800-818-2244
www.oelsales.com
5
1-800-818-2244
SPECIAL ORDER POLICY Effective August 1, 2012 - The following conditions for “SPECIAL ORDERS” will be required.
ALL SPECIAL ORDER APPAREL ITEMS:
• Special sizes and colors will have a 20% up-charge applied to the order total. • Minimum quantities of 6 items (all sizes combined) are required. • Custom embroidery – A $70.00 set up fee and $10.00 per item up-charge will be applied.
ALL SPECIAL ORDER TOOLS:
• The following minimum quantities for custom dipped tools and/or customer product sent to us for dipping are required. o ALL tools except for wrenches = minimum quantities of EACH SKU= 28 each o Wrenches = minimum quantity per SKU = 24 each
SPECIAL ORDER PRODUCT IS NON-RETURNABLE If you have any questions, please consult a sales specialist before placing your order!
TERMS AND CONDITIONS TERMS From the date of invoicing, net 30 days. All orders are subject to OEL credit approval. Visa/ MasterCard/American Express accepted.
quantities. Additional up-charges may apply as well as set-up fees and additional costs for custom embroidery. Minimum quantities may also apply to custom orders. Custom and made –to-order apparel and private branded product are non- returnable.
PRICING Pricing is contingent on cost and availability of materials and are subject to change without notice.
RETURNED GOODS POLICY Returned goods must be stock products. They must be in excellent condition, in the original packaging and not more than 90 days old (from invoicing date). Returned goods must be accompanied with an OEL Worldwide issued Return Merchandise Authorization (RMA) and are subject to a 15% restocking fee plus return freight charges. OEL reserves the right to reject returned product if the aforementioned requirements have not been met. Made-to-order /Custom orders are non-returnable.
MINIMUM ORDER OEL reserves the right to require minimum quantities for custom orders. FREIGHT All shipments are sent UPS and are an add-to-invoice unless other shipping arrangements are made in advance. DROP SHIPMENTS Will be made under the same freight policy mentioned above.
MATERIAL CLEANING AND CARE GUIDELINES For basic guidelines contact an OEL authorized regional Distributor or OEL Sales Representative. For more details contact OEL Custom Service.
RUSH ORDERS While rush orders are not always available, they are subject to a 15% expediting and administrative fee.
TRADEMARKS Nomex® is a registered trademark of DuPont and/or its affiliates. Protera® is a registered trademark of DuPont and/or its affiliates. Kevlar® is a registered trademark of DuPont and/or its affiliates. Indura® is a registered trademark of Westex Corporation. Ultrasoft® is a registered trademark of Westex Corporation. Modaquilt® is a registered trademark of Westex Corporation. Vinex® is a registered trademark of Westex Corporation. Twaron® is a registered trademark of Aramid and/or its affiliates. TecaSafe® /TecaSafe®plus are registered trademarks of TenCate and/or its affiliates. Reliant™ is a trademark of ITI Inovative Textiles Inc.
REPAIR AND REWORK POLICY OEL apparel products are guaranteed from defects in workmanship only. If any product is defective, contact OEL Customer Service for a Return Merchandise Authorization (RMA) prior to returning the product. Apparel is guaranteed for 90 days. Hand tools are guaranteed for life (torques one- year from invoicing). Robo Tools are guaranteed for 90 days. Contact Customer Service for other additional OEM warrantee details. OEL reserves the right to determine whether or not a product is defective.OEL reserves the right to repair or replace product if it has been determined to be defective. MADE TO ORDER/CUSTOM OEL offers custom and made-to-order apparel and tool kits. OEL authorized Distributors and Sales Representatives are available to assist in selecting the correct size and
www.oelsales.com
6
1-800-818-2244
WHAT IS INHERENT FABRIC AND HOW IS IT DIFFERENT FROM TREATED FABRIC? The term “inherent,” as it relates to flame resistant fabric, means that the flame resistant properties were created at the moment the actual fiber was spun resulting in a flame-resistance that is an intrinsic part of the inherently flame resistant fabric. This process is permanent, and cannot be washed out or worn out of the fiber no matter how the garment is used or laundered. Naturally flammable fabrics - such as cotton or cotton/nylon blends - that have a manufacturing step in their creation where a special mixture of chemicals is applied to make the final fabric flame-resistant (FR) are referred to as “treated” or “topically treated” fabrics. Unlike fabrics made with inherently FR fibers, chemically treated FR fabrics may lose some or all of their flame resistant properties over time through laundering and/or exposure to certain chemicals in the work environment.
WHY OEL FR SHIELD™ FABRICS? All OEL FR Shield™ fabrics used in the manufacturing of our ARC Flash apparel meets and or exceeds NFPA 70E, HRC 2, NFPA 2112 and ASTM F1506 performance standards and feature the best of the best: DuPont ™ - Protera® Glenraven ™- Glenguard® Tencate ™- Tecasafe ®plus Innovative Textiles™ - Reliant® DuPont™ Nomex® IIIA ArcGuard ®Revolite™ OEL Worldwide Industries is committed to remaining the vanguard of ARC Flash apparel and will use the most innovative and cutting edge Inherent fabrics available.
Our business is saving lives…
www.oelsales.com
7
1-800-818-2244
Unbeatable Electric Arc Protection.
Unbeatable Flash Fire Protection.
TenCate Tecasafe ® Plus is a comfortable, light-weight fabric with inherent heat and flame resistant properties. NFPA 70E HRC 2 compliant, it provides durable and affordable electric arc protection to electricians, electrical contractors, and other professionals with potential exposure to electric arc flash. Below, you will see how this inherently flame-resistant fabric provides superior protection and outperforms the competition. There’s also Tecasafe Plus Hi-Vis yellow. No need to wear a separate Hi-Vis vest over your flame resistant shirt.
TenCate Tecasafe ® Plus is a comfortable, light-weight fabric with inherent heat and flame resistant properties. NFPA 2112 certified, it provides durable and affordable flash fire protection for workers in the petroleum, petrochemical, fire service, and other professionals that may be exposed to flash fire. Below, you will see how this inherently flame-resistant fabric provides superior protection and outperforms other protective fabrics. There’s also Tecasafe Plus Hi-Vis yellow. No need to wear a separate Hi-Vis vest over your flame resistant shirt.
strength after thermal exposure
Manikin % Burn ASTM F 1930 Manikin Test % Body Burn After 3 sec. Exposure
ASTM D 5034 Tensile Strength Test After 10 sec. TPP Exposure
15
6.7 35
0
Tecasafe® Plus 700
Tecasafe® Plus 700
7.0 osy Indura Ultra Soft®
37
7.0 osy Indura Ultra Soft®
1.7
6.5 osy Protera®
6.5 osy Protera®
32 0
10
20
30
0
6.0 osy Nomex® IIIA
40
50
6.0 osy Nomex® IIIA
0
2
% Body Burn
TABER ABRASION TEST RESULTS TECASAFE PLUS 700
6
8
10
INDURA ULTRA SOFT®
resistance to thermal shrinkage NFPA 2112 TPP Thermal Shrinkage Test
®
PROTERA®
NOMEX® IIIA
150 Cycles
®
4
Lbs. Force — Warp
Tecasafe® Plus 700
1
7.0 osy Indura Ultra Soft®
1.3 250 Cycles
6.5 osy Protera® 6.0 osy Nomex® IIIA
4
4.5 osy Nomex® IIIA
• Inherently flame resistant – FR properties are built in, and won’t wash or wear out. Exceeds NFPA 2112 and NFPA 70E HRC 2 performance standards. • Comfortable to wear – Soft and breathable. Superior moisture management because of special cellulosic fiber content. • Exceptional durability – Outstanding abrasion resistance and better strength retention after multiple commercial washes. • Outstanding laundered appearance – Fabric retains its like-new look and maintains permanent pressed appearance better than other protective fabrics. • Excellent value – Long life cycle and competitive price means lowest cost.
7.7 9.5
20
2
4
6
8
10
% Warp Shrinkage
OEL FR Shield, powered by TenCate Tecasafe® Plus
www.oelsales.com
1-800-818-2244
• Khaki • Light Blue • Gray • Royal Blue • Red • Yellow • Orange • Hi-Vis Yellow • Navy 1
Tecasafe® Plus 700
Tecasafe® Plus 700-A
5.8 oz 197 g
7.0 oz 238 g
7.0 oz 238 g
48% fr-modacrylic 37% lyocell 15% aramid
48% fr-modacrylic 37% lyocell 15% aramid
45% fr-modacrylic 35% lyocell 20% aramid
•••
•••••••
•
6.5
9.0
10.1
5.0 min
8.0 min
