Top Brace Layouts Heated Bender Form Inserts
142.7
6 3/4"
5 5/8"
50.1
50.1
34.2
1.6
6
71.0
71.1
1 11/32"
1 31/32"
1 31/32"
1 11/32"
1/16"
1/32"
2 25/32"
2 13/16"
A
3/16"
34.2
1/16"
4.7
1.6
1/4"
6.4
171.8
142.7
171.8 1 31/32"
1 13/32"
8.0
66.9
4.7
4.7
66.4
2 5/8"
3/16"
3/16"
2 5/8"
Fan Brace
R 76.0
140.2
142.7
5 17/32"
5 5/8"
34.3
35.5
3
6
70.8
71.3
1 11/32"
1 11/32"
1 13/32"
0"
1/32"
2 25/32"
2 13/16"
142.7
140.2
5 5/8"
66.9
4.7
4.7
66.4
1 13/32"
1 11/32"
1 11/32"
1 13/32"
2 5/8"
3/16"
3/16"
2 5/8"
5/16"
8.0
9/32"
35.8 7.5
34.3
1/32"
34.3
5
35.8 1/32" 11/32"
9 9.1
13/32"
10.0
5 17/32"
Fan Brace
Dashed Lines Indicate Rough-Out Line Of Brace Prior To Gluing To Top Once Braces Have Been Glued, Scallop According To The Curvature. Typical For All Braces
Tenor - Cutaway
3/16"
34.3
1 13/32"
4.7
35.5
0"
Waist Top Brace
Dashed Lines Indicate Rough-Out Line Of Brace Prior To Gluing To Top Once Braces Have Been Glued, Scallop According To The Curvature. Typical For All Braces
Notch Fan Brace With A 1mm Notch For Bridge Plate. Glue Bridge Plate First And Carefully Mark Location On Each Fan Brace
3
1/4"
6.4
9/32"
1 31/32"
7.5
1 13/32"
1/32"
35.8
5
50.1
5/16"
50.1
1/32" 11/32"
9 9.1
13/32"
10.0
35.8
Forward Top Brace
B
C
5 5/8"
6 3/4"
D
Notch Fan Brace With A 1mm Notch For Bridge Plate. Glue Bridge Plate First And Carefully Mark Location On Each Fan Brace
108.0
Tenor
157.3
4 1/4"
14.7
8.0
3.0
9/16"
9/16"
5/16"
1/8"
60.0
4.7
3/16"
74.1
4.7
4.7
73.8
2 29/32"
3/16"
3/16"
2 29/32"
Fan Brace
1/32"
130.6
3/32"
5 5/32"
24.0
60.0
24.0
15/16"
2 3/8"
15/16"
108.0 4 1/4"
9/32" 9/16"
5/16"
9/32"
9/16"
7.3
9/16"
14.0
8.0
7.3
14.7
1 1/8"
14.7
28.5
5/16"
14.7
Notch Fan Brace With A 1mm Notch For Bridge Plate. Glue Bridge Plate First And Carefully Mark Location On Each Fan Brace
1mm x 2mm (.04" x .08") Bone At Tie Block Edges
9/16"
8.0
Heated Bender Form Inserts E
7/32"
1.7 2.6 1/16"1.0
1/8" 1/32"
1.0 1.01/32"3.4
7/32"
1/32"
5.4
2 3/8"
5.4
4 9 1.0
9/32"
5/16"
14.7
1/32"
14.7
5/16"
8.0
3 3/32"
6 3/16"
8.0
0" 1/32" 9/16"
78.6
3 3/32"
157.3
7.5
3/32"
5
3/32"
78.6
1"
5/32"
2.7
25.4
4.3
5/32"
7/16" 13/32"
4.3
7/32"
5.9
2.3
7/16"
11.0
1"
25.4
5/32"
15/16"
4.3
24.0
2 3/8"
11/32"
60.0
15/16"
8.5
24.0
11.0 10.2
6 3/16"
Bridge Template
65.3
65.3
2 9/16"
2 9/16"
R 100.0
R 5.0
Bridge Plate Template
Dashed Lines Indicate Shape Of Plate Prior To Final Shaping
R 5.0
Bridge Plate. Build From Top Plate Material Or Hardwood. Grain Shall Run Perpendicular To Top Plate Grain Bridge Plate Thickness Shall Be 1mm (.04")
Note: Bridge Thickness And Saddle Height Is Given For A Guide Only. The Builder Should Verify The Exact Thickness And Saddle Height Shall Be Determined During String Setup, Once The Guitar Is Built.
Top Brace Layouts This Drawing or Drawings Are To Used For One Use Only And Not Reproduced For Any Other Purpose Than Construction Of This Particular Instrument, and a One Time Reproduction Only is Allowed Reproduction, Distribution or Sales For Any Other Use Is Strictly Prohibited And Falls Under U.S Copyright Laws For David VerBurg AIA c 2013 This Sheet Size Is Metric A1 Size Overall Size is 841mm x 594mm With 15mm Borders On All Sides. For USA Customers Print On Architectural "D" (24" x 36") Without Resizing For 1:1 Printout.
Note For Detailed Construction Instructions Refer To Our Book "Guitar & Ukulele Construction Handbook @ http://shopglss.com
Georgia Luthier Supply
14-Fret Tenor Ukulele Plan
Date: March 27, 2013 Revisions:
May 24, 2014
Unless Noted Otherwise, These Plans Are Drawing Full Scale. They Are Labeled in mm and Fractional Inches
Sheet Number
04
6 3/4"
5 5/8"
50.1
50.1
34.2
1.6
6
71.0
71.1
1 11/32"
1 31/32"
1 31/32"
1 11/32"
1/16"
1/32"
2 25/32"
2 13/16"
A
3/16"
34.2
1/16"
4.7
1.6
1/4"
6.4
171.8
142.7
171.8 1 31/32"
1 13/32"
8.0
66.9
4.7
4.7
66.4
2 5/8"
3/16"
3/16"
2 5/8"
Fan Brace
R 76.0
140.2
142.7
5 17/32"
5 5/8"
34.3
35.5
3
6
70.8
71.3
1 11/32"
1 11/32"
1 13/32"
0"
1/32"
2 25/32"
2 13/16"
142.7
140.2
5 5/8"
66.9
4.7
4.7
66.4
1 13/32"
1 11/32"
1 11/32"
1 13/32"
2 5/8"
3/16"
3/16"
2 5/8"
5/16"
8.0
9/32"
35.8 7.5
34.3
1/32"
34.3
5
35.8 1/32" 11/32"
9 9.1
13/32"
10.0
5 17/32"
Fan Brace
Dashed Lines Indicate Rough-Out Line Of Brace Prior To Gluing To Top Once Braces Have Been Glued, Scallop According To The Curvature. Typical For All Braces
Tenor - Cutaway
3/16"
34.3
1 13/32"
4.7
35.5
0"
Waist Top Brace
Dashed Lines Indicate Rough-Out Line Of Brace Prior To Gluing To Top Once Braces Have Been Glued, Scallop According To The Curvature. Typical For All Braces
Notch Fan Brace With A 1mm Notch For Bridge Plate. Glue Bridge Plate First And Carefully Mark Location On Each Fan Brace
3
1/4"
6.4
9/32"
1 31/32"
7.5
1 13/32"
1/32"
35.8
5
50.1
5/16"
50.1
1/32" 11/32"
9 9.1
13/32"
10.0
35.8
Forward Top Brace
B
C
5 5/8"
6 3/4"
D
Notch Fan Brace With A 1mm Notch For Bridge Plate. Glue Bridge Plate First And Carefully Mark Location On Each Fan Brace
108.0
Tenor
157.3
4 1/4"
14.7
8.0
3.0
9/16"
9/16"
5/16"
1/8"
60.0
4.7
3/16"
74.1
4.7
4.7
73.8
2 29/32"
3/16"
3/16"
2 29/32"
Fan Brace
1/32"
130.6
3/32"
5 5/32"
24.0
60.0
24.0
15/16"
2 3/8"
15/16"
108.0 4 1/4"
9/32" 9/16"
5/16"
9/32"
9/16"
7.3
9/16"
14.0
8.0
7.3
14.7
1 1/8"
14.7
28.5
5/16"
14.7
Notch Fan Brace With A 1mm Notch For Bridge Plate. Glue Bridge Plate First And Carefully Mark Location On Each Fan Brace
1mm x 2mm (.04" x .08") Bone At Tie Block Edges
9/16"
8.0
Heated Bender Form Inserts E
7/32"
1.7 2.6 1/16"1.0
1/8" 1/32"
1.0 1.01/32"3.4
7/32"
1/32"
5.4
2 3/8"
5.4
4 9 1.0
9/32"
5/16"
14.7
1/32"
14.7
5/16"
8.0
3 3/32"
6 3/16"
8.0
0" 1/32" 9/16"
78.6
3 3/32"
157.3
7.5
3/32"
5
3/32"
78.6
1"
5/32"
2.7
25.4
4.3
5/32"
7/16" 13/32"
4.3
7/32"
5.9
2.3
7/16"
11.0
1"
25.4
5/32"
15/16"
4.3
24.0
2 3/8"
11/32"
60.0
15/16"
8.5
24.0
11.0 10.2
6 3/16"
Bridge Template
65.3
65.3
2 9/16"
2 9/16"
R 100.0
R 5.0
Bridge Plate Template
Dashed Lines Indicate Shape Of Plate Prior To Final Shaping
R 5.0
Bridge Plate. Build From Top Plate Material Or Hardwood. Grain Shall Run Perpendicular To Top Plate Grain Bridge Plate Thickness Shall Be 1mm (.04")
Note: Bridge Thickness And Saddle Height Is Given For A Guide Only. The Builder Should Verify The Exact Thickness And Saddle Height Shall Be Determined During String Setup, Once The Guitar Is Built.
Top Brace Layouts This Drawing or Drawings Are To Used For One Use Only And Not Reproduced For Any Other Purpose Than Construction Of This Particular Instrument, and a One Time Reproduction Only is Allowed Reproduction, Distribution or Sales For Any Other Use Is Strictly Prohibited And Falls Under U.S Copyright Laws For David VerBurg AIA c 2013 This Sheet Size Is Metric A1 Size Overall Size is 841mm x 594mm With 15mm Borders On All Sides. For USA Customers Print On Architectural "D" (24" x 36") Without Resizing For 1:1 Printout.
Note For Detailed Construction Instructions Refer To Our Book "Guitar & Ukulele Construction Handbook @ http://shopglss.com
Georgia Luthier Supply
14-Fret Tenor Ukulele Plan
Date: March 27, 2013 Revisions:
May 24, 2014
Unless Noted Otherwise, These Plans Are Drawing Full Scale. They Are Labeled in mm and Fractional Inches
Sheet Number
04
