Toshiba Tecra 8200 Hard Drive Replacement
Toshiba Tecra 8200 Hard Drive Replacement
Toshiba Tecra 8200 Hard Drive Replacement This guide will show you how to replace the hard drive in your device.
Written By: Sally
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 7
Toshiba Tecra 8200 Hard Drive Replacement
TOOLS: Phillips #00 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 7
Toshiba Tecra 8200 Hard Drive Replacement
Step 1 — Battery
Unplug the power cord and turn off the device to remove the battery.
To remove the battery, flip the device, so that the bottom is facing upward.
Step 2
Slide the battery to the right side until you hear a click.
Once you hear the click, the battery must be released from the compartment.
Remove the battery carefully.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 7
Toshiba Tecra 8200 Hard Drive Replacement
Step 3 — Hard Drive
Locate the Hard Drive panel
Step 4
Remove single screw (labeled F4) by using a Philips size #00 screwdriver
After removing the screw, lift the panel off the hard drive.
Save the screw. It will be needed for reassembly
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 7
Toshiba Tecra 8200 Hard Drive Replacement
Step 5
Once panel is removed, pull tab to remove hard drive.
Remove old hard drive and replace with new equipment
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 7
Toshiba Tecra 8200 Hard Drive Replacement
Step 7
Insert hard drive back into laptop
Step 8
Tuck in the "pull" tab
Replace panel
Replace the single F4 screw
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 7
Toshiba Tecra 8200 Hard Drive Replacement
Step 9
Identify the connector pins on the battery.
Line up the connector pins on the battery with the connector pins on the computer and push inward to reconnect the battery.
After the battery is connected, slide the exterior panel towards the center of the computer to lock the battery in place.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-24 02:04:11 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 7
Toshiba Tecra 8200 Hard Drive Replacement This guide will show you how to replace the hard drive in your device.
Written By: Sally
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 7
Toshiba Tecra 8200 Hard Drive Replacement
TOOLS: Phillips #00 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 7
Toshiba Tecra 8200 Hard Drive Replacement
Step 1 — Battery
Unplug the power cord and turn off the device to remove the battery.
To remove the battery, flip the device, so that the bottom is facing upward.
Step 2
Slide the battery to the right side until you hear a click.
Once you hear the click, the battery must be released from the compartment.
Remove the battery carefully.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 7
Toshiba Tecra 8200 Hard Drive Replacement
Step 3 — Hard Drive
Locate the Hard Drive panel
Step 4
Remove single screw (labeled F4) by using a Philips size #00 screwdriver
After removing the screw, lift the panel off the hard drive.
Save the screw. It will be needed for reassembly
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 7
Toshiba Tecra 8200 Hard Drive Replacement
Step 5
Once panel is removed, pull tab to remove hard drive.
Remove old hard drive and replace with new equipment
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 7
Toshiba Tecra 8200 Hard Drive Replacement
Step 7
Insert hard drive back into laptop
Step 8
Tuck in the "pull" tab
Replace panel
Replace the single F4 screw
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 7
Toshiba Tecra 8200 Hard Drive Replacement
Step 9
Identify the connector pins on the battery.
Line up the connector pins on the battery with the connector pins on the computer and push inward to reconnect the battery.
After the battery is connected, slide the exterior panel towards the center of the computer to lock the battery in place.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-24 02:04:11 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 7
