Toshiba Thrive Screen Replacement
Toshiba Thrive Screen Replacement
Toshiba Thrive Screen Replacement This guide will show you how to replace your Thrive's screen
Written By: Kason
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 9
Toshiba Thrive Screen Replacement
TOOLS: Phillips #0 Screwdriver (1) Spudger (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 9
Toshiba Thrive Screen Replacement
Step 1 — Back Cover
Make sure the lock switch for the back cover is unlocked.
The cover is unlocked when the switch is slid in the direction of the 'unlock' icon.
Step 2
Remove back cover by prying away from the Thrive.
The easiest place to pry from is one of the two speakers.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 9
Toshiba Thrive Screen Replacement
Step 3
To remove the battery, make sure the lock switch is in the unlocked position.
The battery is unlocked when the switch is slid to the unlocked position.
Step 4
Slide the battery switch release to the right.
While holding the switch in place, lift up the battery.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 9
Toshiba Thrive Screen Replacement
Step 5 — Midframe
Start by using a screwdriver to remove the 12 screws holding on the back cover. The screws are 5mm in length and require a PH0 screwdriver.
All of these screws are identical so don't worry about getting them mixed up.
Step 6
Start to gently pry the back of the device off, while leaving it loosely in place.
Be careful not to tear or damage the cables when removing the back.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 9
Toshiba Thrive Screen Replacement
Step 7
Once the back of the case is off, disconnect the wires by gently pulling on the plastic tabs as shown.
Step 8
Carefully open the device like a book and lay the two halves beside each other.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 9
Toshiba Thrive Screen Replacement
Step 9 — Front Camera
Separate the two halves of your Thrive
Using a Phillips screwdriver, remove the six screws holding the LCD in place. These screws are 3mm in length and require a PH0 screwdriver.
Step 10
© iFixit — CC BY-NC-SA
www.iFixit.com
With a spudger, disconnect the cable connecting the camera to the motherboard.
Page 7 of 9
Toshiba Thrive Screen Replacement
Step 11
Lift up the LCD from the screen and place it on the side
Step 12
Remove the one screw holding the camera in place. The screw is 3mm in length and requires a PH0 screwdriver.
Lift up the camera from the screen.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 8 of 9
Toshiba Thrive Screen Replacement
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-22 04:35:54 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 9 of 9
Toshiba Thrive Screen Replacement This guide will show you how to replace your Thrive's screen
Written By: Kason
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 9
Toshiba Thrive Screen Replacement
TOOLS: Phillips #0 Screwdriver (1) Spudger (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 9
Toshiba Thrive Screen Replacement
Step 1 — Back Cover
Make sure the lock switch for the back cover is unlocked.
The cover is unlocked when the switch is slid in the direction of the 'unlock' icon.
Step 2
Remove back cover by prying away from the Thrive.
The easiest place to pry from is one of the two speakers.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 9
Toshiba Thrive Screen Replacement
Step 3
To remove the battery, make sure the lock switch is in the unlocked position.
The battery is unlocked when the switch is slid to the unlocked position.
Step 4
Slide the battery switch release to the right.
While holding the switch in place, lift up the battery.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 9
Toshiba Thrive Screen Replacement
Step 5 — Midframe
Start by using a screwdriver to remove the 12 screws holding on the back cover. The screws are 5mm in length and require a PH0 screwdriver.
All of these screws are identical so don't worry about getting them mixed up.
Step 6
Start to gently pry the back of the device off, while leaving it loosely in place.
Be careful not to tear or damage the cables when removing the back.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 9
Toshiba Thrive Screen Replacement
Step 7
Once the back of the case is off, disconnect the wires by gently pulling on the plastic tabs as shown.
Step 8
Carefully open the device like a book and lay the two halves beside each other.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 9
Toshiba Thrive Screen Replacement
Step 9 — Front Camera
Separate the two halves of your Thrive
Using a Phillips screwdriver, remove the six screws holding the LCD in place. These screws are 3mm in length and require a PH0 screwdriver.
Step 10
© iFixit — CC BY-NC-SA
www.iFixit.com
With a spudger, disconnect the cable connecting the camera to the motherboard.
Page 7 of 9
Toshiba Thrive Screen Replacement
Step 11
Lift up the LCD from the screen and place it on the side
Step 12
Remove the one screw holding the camera in place. The screw is 3mm in length and requires a PH0 screwdriver.
Lift up the camera from the screen.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 8 of 9
Toshiba Thrive Screen Replacement
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-22 04:35:54 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 9 of 9
