Towel Rail Installation Instructions - Heritage Bathrooms

Code: WTABUNI - D1

Towel Rail Installation Instructions This installation guide interupts from the installation of the basic washstand at section 2 of installation. If you need to install the washstand then please refer to the instructions that come with the washstand. Please follow the Washstand instructions for safety information.

1 1

Check Contents 1 2 3 4 5

1 2 4

3

Towel Rail Nut Towel Rail Bracket Towel Rail Pole Assembly M8x8mm Grub Screw 3mm Hexagonal Key

*1 *2 *2 *2 *1

5

1

2

Assemble the Towel Rail, as shown in the illustration. The grub screws (a) should only be slightly screwed in as this section clamps to the pole return assembly on the washstand.

a

a

1

3

Slide the Towel Rail on the the Pole Return Assembly in the same way as the image and tighten the grub screws using the supplied Hexagonal Key.You can now continue with the washstand installation from section 2.

Guarantee/Aftercare - This product is covered under the aftercare/guarantee sections shown in the Washstand Installation Guide.