Trimmed Extended Splash Guard Install Instructions Instructions

Pg. 1of 1

Trimmed Extended Splash Guard Install Instructions Parts Included in Assembly No.: 5031692 Qty. Description Part Number 1 …….. Left Splash Guard with Trim……5031690 1 …….. Right Splash Guard with Trim….5031691 1 ………Splash Guard Install Instr. ……..5031739

1B

Instructions

1A

Figure 1

1) Shut off or disconnect power supply to unit. Failure to do so can cause electrical shock or injury.

1C

2) Remove screws (1A) from splash panel (1B) and keep for reuse. Remove drain pan grid (1C) and keep for reuse unless installing a different drain pan grid option (See Figure 1). 3) Install left and right splash guards (2A and 3A) by placing bottom flange (2B) of splash guard inside drain pan as shown. Align slot in splash guard with mounting screw hole (2C) of splash panel and reinstall screws (See Figure 2 and 3).

2A

2B

Figure 2

2C

4) Reinstall previously removed drain pan grid (3B) or different drain pan grid option (See Figure 3). 5) Turn on or reconnect power supply to unit. Dispense drinks from unit to ensure proper operation before placing unit back into general service. 3A

3A

3B

Figure 3

Part No. 5031739 Revision No. 0