Triple Shielded Cable
...Cable for professionals 130611 • 02109
Triple Shielded Cable F O R PR O F ES S IO N AL S
Low DC loop resistance
Meter marking
High screening efficiency, class A
Better ingress protection in the return band
www.macab.com
The distribution networks of today are exposed for ingress from other communication networks as LTE, 3G, 4G etc and this means that the coaxial cables have to fulfil very high screening demands to be able to protect the systems from this type of ingress. Choosing Macab’s triple shielded coaxial cable gives you a top of the line cable with copper inner conductor and a very high screening efficiency. Inner conductor
Classification:
In drop cables the most common used conductors are electrolytic copper (CU) or copper clad steel (CCS). The CCS conductor can be used thanks to the radio frequency signal is carried only on the surface of the conductor (skin effect). CCS has much higher loop resistance than the CU conductor and that is a very important factor when the cable is used for remote powering.
Freq range MHz 5–30 30–1000 1000–2000 2000–3000
Class B < 15 75 65 55
Class A
Triple Shielded Cable F O R PR O F ES S IO N AL S
Low DC loop resistance
Meter marking
High screening efficiency, class A
Better ingress protection in the return band
www.macab.com
The distribution networks of today are exposed for ingress from other communication networks as LTE, 3G, 4G etc and this means that the coaxial cables have to fulfil very high screening demands to be able to protect the systems from this type of ingress. Choosing Macab’s triple shielded coaxial cable gives you a top of the line cable with copper inner conductor and a very high screening efficiency. Inner conductor
Classification:
In drop cables the most common used conductors are electrolytic copper (CU) or copper clad steel (CCS). The CCS conductor can be used thanks to the radio frequency signal is carried only on the surface of the conductor (skin effect). CCS has much higher loop resistance than the CU conductor and that is a very important factor when the cable is used for remote powering.
Freq range MHz 5–30 30–1000 1000–2000 2000–3000
Class B < 15 75 65 55
Class A
