ULTRA LIGHT FILLER PRODUCT CODE: ULFâ¦
TECHNICAL DATA SHEET DATE: May 2015
PRODUCT NAME: ULTRA LIGHT FILLER PRODUCT CODE: ULF… Dependent on size SUPPLIER’S NAME : ADDRESS :
CAMPBELLS WHOLESALE PTY LTD 21 BALLANTYNE RD KEWDALE WA 6105 Tel.: (08) 9353 3354 Fax: (08) 9353 6994 www.campbellswholesale.com.au
Product Description:
GSA Ultra Light Filler is a ready to use lightweight, rapid setting filler for interior use & quick overcoating.
Recommended Uses:
Ideal for filling fine cracks and chips in plaster and plasterboard.
Preparation:
Surfaces should be clean and dry with no loose or powdery material or paint.
Application:
Apply a small amount of filler onto a flexible filling blade. Apply in thin layers, pressing firmly into the area being filled, and remove any excess filler. Allow each area to dry before applying the next layer Can be painted when set - dries in 30 minutes in thin applications, depending on atmospheric conditions. Cold or humid conditions may take longer. GSA Ultra Light Filler can be primed with water or oil based primer prior to top coating.
Precautions:
Use GSA Acrylic Gap Filler where movement occurs. If filling very large holes, use GSA Builders Filler with a relevant filling agent. Indoor use only.
Clean Up:
Clean tools and hands with warm soapy water.
Storage:
12 months in unopened container. Close lid tightly after use. Store in a cool place out of direct sunlight.
Health and Safety:
For further information, please refer to the Material Safety Data Sheet which is available from our website.
Available in the Following Sizes: ULF2 – 200ml, ULF75 – 750ml.
Handy Tips for the Best Results: All working surfaces to be well bound, clean, dry, free from dust and grease. Deeper cavities should be filled in layers and allowed to dry to avoid cracking. Using Super Filler, deeper cavities can be filled in one application, but allow at least 24 hours to dry. Using Super Filler, deeper cavities can be filled in one application, but allow at least 24 hours to dry. For broad areas, covering hairline cracks and minor imperfections, Fine Filler (interior) and Super Filler (exterior) can be diluted by 5% - 10% water. Apply with roller and level off with large filler blade or plasterer’s trowel. Any ridges can easily sanded off. To repair wide holes (up to 10cm diameter) use patching tape in conjunction with Super Filler. Exterior AC sheeting must be sealed before filling. To store filler after use, squeeze air from tube before recapping. GSA Fillers can be tinted with standard paint colours.
Disclaimer:
Campbells Wholesale makes no representation as to the completeness and accuracy of the data contained in this data sheet. It is the user’s obligation to evaluate and use this product safely and to comply with all the Local, State and Federal regulations and laws. Campbells Wholesale shall not be responsible for loss, damage or injury resulting from reliance upon or failure to adhere to any recommendations or information contained herein, from abnormal use of the material or from any hazard inherent in the nature of the material.
PRODUCT NAME: ULTRA LIGHT FILLER PRODUCT CODE: ULF… Dependent on size SUPPLIER’S NAME : ADDRESS :
CAMPBELLS WHOLESALE PTY LTD 21 BALLANTYNE RD KEWDALE WA 6105 Tel.: (08) 9353 3354 Fax: (08) 9353 6994 www.campbellswholesale.com.au
Product Description:
GSA Ultra Light Filler is a ready to use lightweight, rapid setting filler for interior use & quick overcoating.
Recommended Uses:
Ideal for filling fine cracks and chips in plaster and plasterboard.
Preparation:
Surfaces should be clean and dry with no loose or powdery material or paint.
Application:
Apply a small amount of filler onto a flexible filling blade. Apply in thin layers, pressing firmly into the area being filled, and remove any excess filler. Allow each area to dry before applying the next layer Can be painted when set - dries in 30 minutes in thin applications, depending on atmospheric conditions. Cold or humid conditions may take longer. GSA Ultra Light Filler can be primed with water or oil based primer prior to top coating.
Precautions:
Use GSA Acrylic Gap Filler where movement occurs. If filling very large holes, use GSA Builders Filler with a relevant filling agent. Indoor use only.
Clean Up:
Clean tools and hands with warm soapy water.
Storage:
12 months in unopened container. Close lid tightly after use. Store in a cool place out of direct sunlight.
Health and Safety:
For further information, please refer to the Material Safety Data Sheet which is available from our website.
Available in the Following Sizes: ULF2 – 200ml, ULF75 – 750ml.
Handy Tips for the Best Results: All working surfaces to be well bound, clean, dry, free from dust and grease. Deeper cavities should be filled in layers and allowed to dry to avoid cracking. Using Super Filler, deeper cavities can be filled in one application, but allow at least 24 hours to dry. Using Super Filler, deeper cavities can be filled in one application, but allow at least 24 hours to dry. For broad areas, covering hairline cracks and minor imperfections, Fine Filler (interior) and Super Filler (exterior) can be diluted by 5% - 10% water. Apply with roller and level off with large filler blade or plasterer’s trowel. Any ridges can easily sanded off. To repair wide holes (up to 10cm diameter) use patching tape in conjunction with Super Filler. Exterior AC sheeting must be sealed before filling. To store filler after use, squeeze air from tube before recapping. GSA Fillers can be tinted with standard paint colours.
Disclaimer:
Campbells Wholesale makes no representation as to the completeness and accuracy of the data contained in this data sheet. It is the user’s obligation to evaluate and use this product safely and to comply with all the Local, State and Federal regulations and laws. Campbells Wholesale shall not be responsible for loss, damage or injury resulting from reliance upon or failure to adhere to any recommendations or information contained herein, from abnormal use of the material or from any hazard inherent in the nature of the material.
