Ultrafit Cross Over - Showdown Displays
Ultrafit Cross Over
Product Parts
1
1 - Graphic (x2)
Table (sold separately)
Graphic Install Step 1 Set up your table according to the manufactures specifications. Remove the graphic (1) from the package and locate the Leg Pockets on the bottom of the throw.
Step 2 Slide the left table legs of the into the two leg pockets of the throw and stretch the throw over the top of the table and secure the opposite edge of the throw to the opposite side of the table (as shown). Some slight adjustments may be needed to remove any wrinkles.
Step 3 Remove the second graphic (1) from the bag and secure the short side of the throw to the left side of the table and begin to pull the graphic (1) over the table and down to the feet. Place the Table Legs into the throw leg pockets, making sure not to loosen the throw previously installed. Some slight adjustments may be needed to remove any wrinkles.
Storage & Care Store in a cool dry location. Machine wash cold, gentle cycle. Tumble dry only, no heat.
2/15
Product Parts
1
1 - Graphic (x2)
Table (sold separately)
Graphic Install Step 1 Set up your table according to the manufactures specifications. Remove the graphic (1) from the package and locate the Leg Pockets on the bottom of the throw.
Step 2 Slide the left table legs of the into the two leg pockets of the throw and stretch the throw over the top of the table and secure the opposite edge of the throw to the opposite side of the table (as shown). Some slight adjustments may be needed to remove any wrinkles.
Step 3 Remove the second graphic (1) from the bag and secure the short side of the throw to the left side of the table and begin to pull the graphic (1) over the table and down to the feet. Place the Table Legs into the throw leg pockets, making sure not to loosen the throw previously installed. Some slight adjustments may be needed to remove any wrinkles.
Storage & Care Store in a cool dry location. Machine wash cold, gentle cycle. Tumble dry only, no heat.
2/15
