1. Locate corners A & B measuring from the reference points shown & stake. Warning! The path is at an angle – DON’T square field to path! 2. Run spool rope from corner stakes A-B, then approximately to C (C is temporary – not staked yet) 3. Measure 90’ along goal line from B & stake point Y Y C
4. Measure 150’ from Y towards Z 150’
5. With 2nd tape, measure 120’ from corner B towards Z 6. Find point Z where the 2 tapes intersect at 120’ & 150’ & stake Z. This is the touchline (square to the goal line). 7. Adjust the rope from B-C so it is along Z, & measure the length from B to find & stake corner C.
Path
150’
90’
8. Measure corner D from Corners A & C to find where the tapes intersect and stake corner D. 9. Remove stakes Y & Z 10. If all looks good, line perimeter C
11.
B 120’
61’
Z C 210-220’ 56’-8” Utility Pole
Bath Rooms
Team side touch line (can see where it lines up in distance)
Parent side touch line to path
centerline to parent side touch
Left rear corner - can use trees for approximate location